Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

TC 17  - Steel

Subcommittees
Subcommittee Subcommittee Title
0 TC 17/SC 1 Methods of determination of chemical composition
Standards and projects under the direct responsibility of TC 17/SC 1 Secretariat
Standard and/or project  ICS
0ISO 437:1982
Steel and cast iron -- Determination of total carbon content -- Combustion gravimetric method 90.93 77.080.01
1ISO 437:1982/NP Amd 1
 10.99 77.080.01
2ISO 439:1994
Steel and iron -- Determination of total silicon content -- Gravimetric method 90.93 77.080.01
4ISO 629:1982
Steel and cast iron -- Determination of manganese content -- Spectrophotometric method 90.93 77.080.01
5ISO 671:1982
Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric method 90.93 77.080.01
7ISO 4829-1:1986
Steel and cast iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 and 1,0 % 90.93 77.080.01
8ISO 4829-2:1988
Steel and iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon contents between 0,01 and 0,05 % 90.93 77.080.01
12ISO/TR 4830-4:1978
Steel -- Determination of low carbon contents -- Part 4: Coulometric method after combustion 90.93 77.080.20
14ISO 4934:2003
Steel and iron -- Determination of sulfur content -- Gravimetric method 90.93 77.080.01
15ISO 4935:1989
Steel and iron -- Determination of sulfur content -- Infrared absorption method after combustion in an induction furnace 90.93 77.080.01
17ISO 4937:1986
Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method 90.93 77.080.01
18ISO 4938:1988
Steel and iron -- Determination of nickel content -- Gravimetric or titrimetric method 90.93 77.080.01
19ISO 4939:1984
Steel and cast iron -- Determination of nickel content -- Dimethylglyoxime spectrophotometric method 90.93 77.080.01
20ISO 4940:1985
Steel and cast iron -- Determination of nickel content -- Flame atomic absorption spectrometric method 90.93 77.080.01
21ISO 4941:1994
Steel and iron -- Determination of molybdenum content -- Thiocyanate spectrophotometric method 90.93 77.080.01
23ISO 4942:1988
Steel and iron -- Determination of vanadium content -- N-BPHA spectrophotometric method 90.93 77.080.01
24ISO 4943:1985
Steel and cast iron -- Determination of copper content -- Flame atomic absorption spectrometric method 90.93 77.080.01
25ISO 4945:1977
Steel -- Determination of nitrogen content -- Spectrophotometric method 90.93 77.080.20
26ISO 4946:1984
Steel and cast iron -- Determination of copper content -- 2,2'-Diquinolyl spectrophotometric method 90.93 77.080.01
27ISO 4947:1986
Steel and cast iron -- Determination of vanadium content -- Potentiometric titration method 90.93 77.080.01
28ISO 9441:1988
Steel -- Determination of niobium content -- PAR spectrophotometric method 90.93 77.080.20
29ISO 9556:1989
Steel and iron -- Determination of total carbon content -- Infrared absorption method after combustion in an induction furnace 90.93 77.080.01
30ISO 9647:1989
Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method 90.93 77.080.01
31ISO 9658:1990
Steel -- Determination of aluminium content -- Flame atomic absorption spectrometric method 90.93 77.080.20
34ISO/TR 9769:1991
Steel and iron -- Review of available methods of analysis 60.60 77.080.01
35ISO 10138:1991
Steel and iron -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.93 77.080.01
36ISO 10153:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method 90.93 77.080.20
38ISO 10278:1995
Steel -- Determination of manganese content -- Inductively coupled plasma atomic emission spectrometric method 90.93 77.080.20
39ISO 10280:1991
Steel and iron -- Determination of titanium content -- Diantipyrylmethane spectrometric method 90.93 77.080.01
41ISO 10697-1:1992
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 1: Determination of acid-soluble calcium content 90.93 77.080.20
42ISO 10697-2:1994
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 2: Determination of total calcium content 90.93 77.080.20
43ISO 10698:1994
Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method 90.93 77.080.20
44ISO 10700:1994
Steel and iron -- Determination of manganese content -- Flame atomic absorption spectrometric method 90.93 77.080.01
45ISO 10701:1994
Steel and iron -- Determination of sulfur content -- Methylene blue spectrophotometric method 90.93 77.080.01
46ISO 10702:1993
Steel and iron -- Determination of nitrogen content -- Titrimetric method after distillation 90.93 77.080.01
47ISO 10714:1992
Steel and iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method 90.93 77.080.01
48ISO/TR 10719:1994
Steel and iron -- Determination of non-combined carbon content -- Infrared absorption method after combustion in an induction furnace 90.93 77.080.01
49ISO 10720:1997
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas 90.93 77.080.01
50ISO 11652:1997
Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method 90.93 77.080.01
51ISO 11653:1997
Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange 90.93 77.080.20
52ISO 13898-1:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution 90.93 77.080.01
53ISO 13898-2:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content 90.93 77.080.01
54ISO 13898-3:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content 90.93 77.080.01
55ISO 13898-4:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content 90.93 77.080.01
56ISO/TS 13899-1:2004
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content 90.93 77.080.20
57ISO 13899-2:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of Nb content 90.93 77.080.20
58ISO/TS 13899-3:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of W content 90.93 77.080.20
59ISO 13900:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation 90.93 77.080.20
60ISO 13902:1997
Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace 90.93 77.080.01
61ISO 14284:1996
Steel and iron -- Sampling and preparation of samples for the determination of chemical composition 90.93 77.080.01
62ISO/TR 15349-1:1998
Unalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) 90.93 77.080.20
63ISO 15349-2:1999
Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) 90.93 77.080.20
64ISO/TR 15349-3:1998
Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) 90.93 77.080.20
65ISO 15350:2000
Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 90.93 77.080.01
66ISO 15351:1999
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 90.93 77.080.01
67ISO 15353:2001
Steel and iron -- Determination of tin content -- Flame atomic absorption spectrometric method (extraction as Sn-SCN) 90.93 77.080.01
68ISO 15355:1999
Steel and iron -- Determination of chromium content -- Indirect titration method 90.93 77.080.01
69ISO 16918-1:2009
Steel and iron -- Determination of nine elements by the inductively coupled plasma mass spectrometric method -- Part 1: Determination of tin, antimony, cerium, lead and bismuth 60.60 77.080.01
71ISO 17053:2005
Steel and iron -- Determination of oxygen -- Infrared method after fusion under inert gas 90.93 77.080.01
72ISO/DIS 17054
Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique 40.60 77.080.20
73ISO/TR 17055:2002
Steel -- Determination of silicon content -- Inductively coupled plasma atomic emission spectrometric method 60.60 77.080.20
74ISO 17058:2004
Steel and iron -- Determination of arsenic content -- Spectrophotometric method 90.93 77.080.01
75ISO 17925:2004
Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry 90.93 77.080.20
25.220.40
77ISO/CD 18632
Alloyed steel -- Determination of manganese -- Potentiometric and visual titration method 30.60 77.140.20
78ISO/WD 19272
Alloyed steel -- Determination of fifteen elements -- Glow discharge optical emission spectrometry 20.60 77.140.20
80ISO/WD 24897
Steel -- Determination of trace amount of oxigen -- Infrared method with oxide layer subtraction technique 20.20 77.080.20

1 TC 17/SC 3 Steels for structural purposes
Standards and projects under the direct responsibility of TC 17/SC 3 Secretariat
Standard and/or project  ICS
1ISO 630:1995
Structural steels -- Plates, wide flats, bars, sections and profiles 90.92 77.140.01
2ISO 630:1995/Amd 1:2003
 60.60 77.140.01
3ISO/WD 630-1
Structural steels -- Part 1: General delivery conditions for hot rolled products 20.99 77.140.01
4ISO/WD 630-2
Structural steels -- Part 2: Technical delivery conditions for non alloy structural steels for general purpose 20.99 77.140.01
5ISO 1052:1982
Steels for general engineering purposes 90.93 77.140.01
7ISO 4950-1:1995
High yield strength flat steel products -- Part 1: General requirements 90.93 77.140.50
8ISO 4950-1:1995/Amd 1:2003
 60.60 77.140.50
10ISO 4950-2:1995
High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition 90.93 77.140.50
11ISO 4950-2:1995/Amd 1:2003
 60.60 77.140.50
12ISO 4950-3:1995
High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition 90.93 77.140.50
14ISO 4950-3:1995/Amd 1:2003
 60.60 77.140.50
16ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements 90.93 77.140.70
77.140.60
17ISO 4951-2:2001
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels 90.93 77.140.70
77.140.60
18ISO 4951-3:2001
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels 90.93 77.140.70
77.140.60
20ISO 4952:2006
Structural steels with improved atmospheric corrosion resistance 60.60 77.140.20
23ISO 6930-1:2001
High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels 90.93 77.140.50
24ISO 6930-2:2004
High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels 90.93 77.140.50
25ISO/NP 7452
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 10.99 77.140.50
77.140.70
27ISO 7452:2002
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 90.92 77.140.70
77.140.50
28ISO 7778:1983
Steel plate with specified through-thickness characteristics 90.93 77.140.50
29ISO 7788:1985
Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements 90.93 77.140.50
30ISO 9034:1987
Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape 90.60 77.140.50
31ISO 20723:2004
Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements 90.93 77.140.70
77.140.60
32ISO 24314:2006
Structural steels -- Structural steels for building with improved seismic resistance -- Technical delivery conditions 60.60 77.140.70
91.120.25

2 TC 17/SC 4 Heat treatable and alloy steels
Standards and projects under the direct responsibility of TC 17/SC 4 Secretariat
Standard and/or project  ICS
1ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 77.140.45
77.140.20
77.140.10
10ISO 683-9:1988
Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels 90.20 77.140.10
77.140.20
12ISO 683-10:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels 90.93 77.140.10
77.140.20
14ISO 683-11:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 11: Wrought case-hardening steels 90.92 77.140.10
77.140.20
18ISO 683-14:2004
Heat-treatable steels, alloy steels and free-cutting steels -- Part 14: Hot-rolled steels for quenched and tempered springs 90.93 77.140.25
22ISO 683-15:1992
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines 90.93 77.140.10
27.020
77.140.20
25ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels 90.93 77.140.20
77.140.10
27ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 77.140.20
77.140.10
77.140.45
28ISO 4954:1993
Steels for cold heading and cold extruding 90.20 77.140.20
77.140.10
30ISO 4955:2005
Heat-resistant steels 90.93 77.140.20
35ISO 4957:1999
Tool steels 90.93 77.140.35
37ISO 6931-1:1994
Stainless steels for springs -- Part 1: Wire 90.93 77.140.25
38ISO 6931-2:2005
Stainless steels for springs -- Part 2: Narrow strip 90.93 77.140.25
40ISO 9442:1988
Steel -- Hot-rolled ribbed and grooved flats for spring leaves -- Tolerances and dimensions 90.93 77.140.25
41ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 77.140.20
77.140.60
77.140.10
44ISO 9444-1:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 77.140.50
77.140.20
45ISO 9444-2:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate 60.60 77.140.50
77.140.20
48ISO 9445-1:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 77.140.20
77.140.50
49ISO 9445-2:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet 60.60 77.140.20
77.140.50
52ISO/TR 11637:1997
Boron treated engineering steels for quenching and tempering 90.93 77.140.10
53ISO 11692:1994
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures 90.20 77.140.10
77.140.20
55ISO/DIS 15510
Stainless steels -- Chemical composition 40.60 77.140.20
56ISO/TS 15510:2003
Stainless steels -- Chemical composition 90.92 77.140.20
57ISO 16143-1:2004
Stainless steels for general purposes -- Part 1: Flat products 90.93 77.140.20
58ISO 16143-2:2004
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections 90.93 77.140.20
59ISO 16143-3:2005
Stainless steels for general purposes -- Part 3: Wire 90.93 77.140.65
77.140.20
60ISO 18286:2008
Hot-rolled stainless steel plates -- Tolerances on dimensions and shape 60.60 77.140.50

 
3 TC 17/SC 7 Methods of testing (other than mechanical tests and chemical analysis)
Standards and projects under the direct responsibility of TC 17/SC 7 Secretariat
Standard and/or project  ICS
1ISO 642:1999
Steel -- Hardenability test by end quenching (Jominy test) 90.93 77.040.99
3ISO 643:2003
Steels -- Micrographic determination of the apparent grain size 60.60 77.040.99
4ISO 2639:2002
Steels -- Determination and verification of the depth of carburized and hardened cases 60.60 77.040.99
6ISO 3651-1:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) 90.60 77.060
8ISO 3651-2:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid 90.60 77.060
10ISO 3754:1976
Steel -- Determination of effective depth of hardening after flame or induction hardening 90.93 77.040.99
11ISO 3763:1976
Wrought steels -- Macroscopic methods for assessing the content of non-metallic inclusions 90.93 77.040.99
13ISO 3887:2003
Steels -- Determination of depth of decarburization 60.60 77.040.99
15ISO 4967:1998
Steel -- Determination of content of nonmetallic inclusions -- Micrographic method using standard diagrams 90.60 77.040.99
16ISO 4968:1979
Steel -- Macrographic examination by sulfur print (Baumann method) 90.93 77.040.99
17ISO 4969:1980
Steel -- Macroscopic examination by etching with strong mineral acids 90.93 77.040.99
18ISO 4970:1979
Steel -- Determination of total or effective thickness of thin surface-hardened layers 90.93 77.040.99
19ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 77.140.20
77.140.10
77.140.35
77.040.99
20ISO 9042:1988
Steels -- Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid 90.60 77.040.99
21ISO 14250:2000
Steel -- Metallographic characterization of duplex grain size and distributions 90.93 77.080.20
22ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm 60.60 77.140.50
77.040.20

4 TC 17/SC 10 Steel for pressure purposes

Standards and projects under the direct responsibility of TC 17/SC 10 Secretariat
Standard and/or project  ICS
4ISO 4978:1983
Flat rolled steel products for welded gas cylinders 90.93 77.140.30
5ISO 9327-1:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.93 77.140.85
77.140.30
6ISO 9327-2:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties 90.93 77.140.85
77.140.30
7ISO 9327-3:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties 90.93 77.140.85
77.140.30
8ISO 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength 90.93 77.140.85
77.140.30
9ISO 9327-5:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels 90.93 77.140.85
77.140.30
11ISO/CD 9328-1
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 30.60 77.140.30
77.140.50
12ISO 9328-1:2003
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.92 77.140.50
77.140.30
13ISO 9328-2:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 90.92 77.140.50
77.140.30
14ISO/CD 9328-2
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 30.60 77.140.30
77.140.50
17ISO 9328-3:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized 90.93 77.140.50
77.140.30
19ISO 9328-3:2004/CD Amd 1
 30.60 77.140.30
77.140.50
21ISO 9328-4:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties 90.93 77.140.50
77.140.30
22ISO 9328-4:2004/CD Amd 1
 30.60 77.140.30
77.140.50
23ISO 9328-5:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled 90.93 77.140.50
77.140.30
25ISO 9328-5:2004/CD Amd 1
 30.60 77.140.30
77.140.50
26ISO 9328-6:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered 90.93 77.140.50
77.140.30
27ISO 9328-6:2004/CD Amd 1
 30.60 77.140.30
77.140.50
28ISO 9328-7:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 90.92 77.140.50
77.140.30
29ISO/CD 9328-7
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 30.60 77.140.30
77.140.50
30ISO/TR 15461:1997
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests 60.60 77.140.85
77.040.10

5 TC 17/SC 11 Steel castings
Standards and projects under the direct responsibility of TC 17/SC 11 Secretariat
Standard and/or project  ICS
0ISO 3755:1991
Cast carbon steels for general engineering purposes 90.60 77.140.80
2ISO 4986:1992
Steel castings -- Magnetic particle inspection 90.92 77.040.20
77.140.80
3ISO/DIS 4986
Steel and iron castings -- Magnetic particle inspection 40.99 77.040.20
77.140.80
4ISO 4987:1992
Steel castings -- Penetrant inspection 90.92 77.040.20
77.140.80
5ISO/DIS 4987
Steel and iron castings -- Liquid penetrant inspection 40.99 77.040.20
77.140.80
6ISO 4990:2003
Steel castings -- General technical delivery requirements 90.60 77.140.80
8ISO 4991:2005
Steel castings for pressure purposes 90.60 77.140.80
77.140.30
10ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes 90.20 77.040.20
77.140.80
11ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components 90.20 77.040.20
77.140.80
13ISO 4993:2009
Steel and iron castings -- Radiographic inspection 60.60 77.040.20
77.140.80
14ISO 9477:1992
High strength cast steels for general engineering and structural purposes 90.60 77.140.80
15ISO/DIS 10679
Steel -- Cast tool steel 40.60 77.140.80
16ISO 11970:2001
Specification and approval of welding procedures for production welding of steel castings 90.60 77.140.80
25.160.10
18ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality 60.60 77.040.20
77.140.80
19ISO 11972:1998
Corrosion-resistant cast steels for general applications 90.60 77.140.20
77.140.80
20ISO 11973:1999
Heat-resistant cast steels and alloys for general applications 90.20 77.140.20
77.140.80
21ISO 13520:2002
Determination of ferrite content in austenitic stainless steel castings 90.60 77.140.80
22ISO 13521:1999
Austenitic manganese steel castings 90.20 77.140.80
23ISO 13583-1:2000
Centrifugally cast steel and alloy products -- Part 1: General testing and tolerances 90.60 77.140.80
24ISO 13583-2:2003
Centrifugally cast steel and alloy products -- Part 2: Heat resistant materials 90.60 77.140.80
25ISO 14737:2003
Cast non-alloy and low alloy steels for general applications 90.60 77.140.80
26ISO 16468:2005
Investment castings (steel, nickel alloys and cobalt alloys) -- General technical requirements 90.60 77.140.80
27ISO 19959:2005
Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys 90.60 77.140.80
28ISO 19960:2005
Cast steels and alloys with special physical properties 90.60 77.140.80

6 TC 17/SC 12 Continuous mill flat rolled products
Standards and projects under the direct responsibility of TC 17/SC 12 Secretariat
Standard and/or project  ICS
3ISO 3573:2008
Hot-rolled carbon steel sheet of commercial and drawing qualities 60.60 77.140.50
4ISO 3574:2008
Cold-reduced carbon steel sheet of commercial and drawing qualities 60.60 77.140.50
8ISO/NP 3575
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities 10.99 77.140.50
9ISO 3575:2005
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities 90.92 77.140.50
15ISO 4960:2007
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % 60.60 77.140.50
18ISO 4995:2008
Hot-rolled steel sheet of structural quality 60.60 77.140.50
21ISO 4996:2007
Hot-rolled steel sheet of high yield stress structural quality 60.60 77.140.50
28ISO 4997:2007
Cold-reduced carbon steel sheet of structural quality 60.60 77.140.50
32ISO/NP 4998
Continuous hot-dip zinc-coated carbon steel sheet of structural quality 10.99 77.140.50
33ISO 4998:2005
Continuous hot-dip zinc-coated carbon steel sheet of structural quality 90.92 77.140.50
36ISO/NP 4999
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities 10.99 77.140.50
37ISO 4999:2005
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities 90.92 77.140.50
39ISO 5000:2005
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities 90.92 77.140.50
40ISO/NP 5000
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities 10.99 77.140.50
43ISO 5001:2007
Cold-reduced carbon steel sheet for vitreous enamelling 60.60 77.140.50
47ISO 5002:2008
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities 60.60 77.140.50
53ISO 5950:2008
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities 60.60 77.140.50
55ISO 5951:2008
Hot-rolled steel sheet of higher yield strength with improved formability 60.60 77.140.50
58ISO/NP 5952
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance 10.99 77.140.50
59ISO 5952:2005
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance 90.92 77.140.50
62ISO 5954:2007
Cold-reduced carbon steel sheet according to hardness requirements 60.60 77.140.50
68ISO 6316:2008
Hot-rolled steel strip of structural quality 60.60 77.140.50
70ISO 6317:2008
Hot-rolled carbon steel strip of commercial and drawing qualities 60.60 77.140.50
74ISO 6932:2008
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % 60.60 77.140.50
75ISO 9364:2006
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities 90.20 77.140.50
79ISO 10384:2008
Hot-rolled carbon steel sheet as defined by chemical composition 60.60 77.140.50
82ISO 13887:2004
Cold-reduced steel sheet of higher yield strength with improved formability 90.60 77.140.50
83ISO 13976:2005
Hot-rolled steel sheet in coils of structural quality and heavy thickness 90.60 77.140.50
86ISO 14590:2005
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability 90.60 77.140.50
87ISO 14788:2005
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet 90.92 77.140.50
88ISO/NP 14788
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet 10.99 77.140.50
91ISO 16160:2005
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances 90.92 77.140.50
93ISO/NP 16160
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances 10.99 77.140.50
94ISO 16162:2005
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances 90.92 77.140.50
96ISO/NP 16162
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances 10.99 77.140.50
98ISO 16163:2005
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances 90.92 77.140.50
99ISO/NP 16163
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances 10.99 77.140.50
100ISO 16172:2006
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe 90.20 77.140.50
101ISO 20805:2005
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming 90.92 77.140.50
102ISO/NP 20805
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming 10.99 77.140.50

7 TC 17/SC 15 Railway rails and their fasteners
Standards and projects under the direct responsibility of TC 17/SC 15 Secretariat
Standard and/or project  ICS
0ISO 5003:1980
Flat bottom railway rails and special rail sections for switches and crossings of non-treated steel -- Technical delivery requirements 90.93 45.080
2ISO 6305-2:2007
Railway components -- Technical delivery requirements -- Part 2: Non-alloy carbon steel baseplates 60.60 45.080
4ISO 6305-3:1983
Railway components -- Technical delivery requirements -- Part 3: Steel sleepers 90.93 45.080
5ISO 6305-4:1985
Railway components -- Technical delivery requirements -- Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings 90.93 45.080

8 TC 17/SC 16 Steels for the reinforcement and prestressing of concrete
Standards and projects under the direct responsibility of TC 17/SC 16 Secretariat
Standard and/or project  ICS
0ISO 6934-1:1991
Steel for the prestressing of concrete -- Part 1: General requirements 90.93 91.080.40
77.140.15
1ISO 6934-2:1991
Steel for the prestressing of concrete -- Part 2: Cold-drawn wire 90.93 91.080.40
77.140.15
2ISO 6934-3:1991
Steel for the prestressing of concrete -- Part 3: Quenched and tempered wire 90.93 91.080.40
77.140.15
3ISO 6934-4:1991
Steel for the prestressing of concrete -- Part 4: Strand 90.93 91.080.40
77.140.15
4ISO 6934-4:1991/Cor 1:1992
 60.60 91.080.40
77.140.15
5ISO 6934-4:1991/Cor 2:2000
 60.60 91.080.40
77.140.15
6ISO 6934-5:1991
Steel for the prestressing of concrete -- Part 5: Hot-rolled steel bars with or without subsequent processing 90.93 91.080.40
77.140.15
7ISO 6935-1:2007
Steel for the reinforcement of concrete -- Part 1: Plain bars 60.60 77.140.15
91.080.40
10ISO 6935-2:2007
Steel for the reinforcement of concrete -- Part 2: Ribbed bars 60.60 77.140.15
91.080.40
11ISO 6935-3:1992
Steel for the reinforcement of concrete -- Part 3: Welded fabric 90.93 77.140.15
91.080.40
12ISO 6935-3:1992/Cor 1:2000
 60.60 77.140.15
91.080.40
14ISO 10144:1991
Certification scheme for steel bars and wires for the reinforcement of concrete structures 90.93 77.140.15
91.080.40
16ISO 10544:1992
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric 90.93 91.080.40
77.140.15
18ISO 11082:1992
Certification scheme for welded fabric for the reinforcement of concrete structures 90.93 91.080.40
77.140.15
19ISO/TR 12662:1997
Certification scheme for prestressing steels 60.60 91.080.40
77.140.15
20ISO 14654:1999
Epoxy-coated steel for the reinforcement of concrete 90.93 91.080.40
77.140.15
21ISO 14655:1999
Epoxy-coated strand for the prestressing of concrete 90.93 91.080.40
77.140.15
22ISO 14656:1999
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete 90.93 25.220.99
91.080.40
77.140.15
23ISO 14657:2005
Zinc-coated steel for the reinforcement of concrete 90.93 77.140.99
91.080.40
24ISO 15630-1:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire 90.92 77.140.15
25ISO/DIS 15630-1.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire 40.60 77.140.15
26ISO 15630-2:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric 90.92 77.140.15
27ISO/DIS 15630-2.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric 40.60 77.140.15
28ISO 15630-3:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel 90.92 77.140.15
29ISO/DIS 15630-3.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel 40.60 77.140.15
30ISO/CD 15698-1
Steel for the reinforcement of concrete -- Headed bars -- Part 1: Requirements 30.60 77.140.15
31ISO/CD 15698-2
Steel for the reinforcement of concrete -- Headed bars -- Part 2: Test methods  30.60 77.140.15
32ISO 15835-1:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements 60.60 77.140.15
33ISO 15835-2:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods 60.60 77.140.15
34ISO 16020:2005
Steel for the reinforcement and prestressing of concrete -- Vocabulary 90.93 01.040.77
77.140.15

9 TC 17/SC 17 Steel wire rod and wire products
Standards and projects under the direct responsibility of TC 17/SC 17 Secretariat
Standard and/or project  ICS
1ISO 7900:2006
Steel wire and wire products for fences -- Zinc- and zinc-alloy-coated steel barbed wire 90.20 77.140.65
91.090
3ISO 7989-1:2006
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 1: General principles 90.20 25.220.40
77.140.65
4ISO 7989-2:2007
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 2: Zinc or zinc-alloy coating 60.60 25.220.40
77.140.65
7ISO 8458-1:2002
Steel wire for mechanical springs -- Part 1: General requirements 90.93 77.140.25
10ISO 8458-2:2002
Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire 90.93 77.140.25
11ISO 8458-3:2002
Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire 90.93 77.140.25
13ISO/AWI 13270
Steel fibres for concrete -- Definitions and specifications 20.00 77.140.15
91.080.40
14ISO/CD 16120-1
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements 30.60 77.140.60
15ISO 16120-1:2001
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements 90.92 77.140.60
16ISO 16120-2:2001
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod 90.92 77.140.60
17ISO/CD 16120-2
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod 30.60 77.140.60
18ISO 16120-3:2001
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod 90.92 77.140.60
19ISO/CD 16120-3
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod 30.60 77.140.60
20ISO 16120-4:2001
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications 90.92 77.140.60
21ISO/CD 16120-4
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications 30.60 77.140.60
22ISO 16124:2004
Steel wire rod -- Dimensions and tolerances 90.93 77.140.65
23ISO 16650:2004
Bead wire 90.93 77.140.65
24ISO/PRF 17832
Non-parallel steel wire and cords for tyre reinforcement 50.20 83.160.01
77.140.65
25ISO 22034-1:2007
Steel wire and wire products -- Part 1: General test methods 60.60 77.140.65
26ISO 22034-2:2007
Steel wire and wire products -- Part 2: Tolerances on wire dimensions 60.60 77.140.65
27ISO 23717:2006
Steel wire and wire products -- Hose reinforcement wire 90.20 77.140.65

10 TC 17/SC 19 Technical delivery conditions for steel tubes for pressure purposes
Standards and projects under the direct responsibility of TC 17/SC 19 Secretariat
Standard and/or project  ICS
4ISO 6758:1980
Welded steel tubes for heat exchangers 90.60 77.140.75
27.060.30
5ISO 6759:1980
Seamless steel tubes for heat exchangers 90.60 77.140.75
27.060.30
7ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness 90.92 77.040.20
77.140.75
23.040.10
8ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections 90.92 77.040.20
23.040.10
77.140.75
9ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections 90.92 23.040.10
77.140.75
77.040.20
10ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections 90.92 23.040.10
77.140.75
77.040.20
11ISO 9329-1:1989
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties 90.60 77.140.75
23.040.10
12ISO 9329-2:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties 90.60 77.140.75
23.040.10
13ISO 9329-3:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties 90.60 77.140.75
23.040.10
14ISO 9329-4:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels 90.60 77.140.75
23.040.10
15ISO 9330-1:1990
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties 90.93 77.140.75
23.040.10
16ISO 9330-2:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.60 77.140.75
23.040.10
17ISO 9330-3:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties 90.60 23.040.10
77.140.75
18ISO 9330-4:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.93 77.140.75
23.040.10
19ISO 9330-5:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties 90.93 77.140.75
23.040.10
20ISO 9330-6:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes 90.60 77.140.75
23.040.10
21ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections 90.92 77.140.75
77.040.20
23.040.10
22ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections 90.92 77.140.75
77.040.20
23.040.10
23ISO 9764:1989
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections 90.92 25.160.40
23.040.10
77.140.75
24ISO 9765:1990
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections 90.92 23.040.10
77.140.75
25.160.40
25ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections 90.92 23.040.10
77.040.20
77.140.75
26ISO/DIS 10332
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness as a substitution for the hydraulic test 40.20 23.040.10
77.040.20
77.140.75
27ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness 90.92 23.040.10
77.140.75
77.040.20
28ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing 90.92 23.040.10
77.140.75
77.040.20
29ISO/DIS 10893-1
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test 40.20 77.040.20
77.140.75
23.040.10
30ISO/DIS 10893-2
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections 40.20 23.040.10
77.040.20
77.140.75
31ISO/DIS 10893-3
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 23.040.10
77.040.20
77.140.75
32ISO/DIS 10893-4
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections 40.20 23.040.10
77.040.20
77.140.75
33ISO/DIS 10893-5
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections 40.20 23.040.10
77.040.20
77.140.75
34ISO/DIS 10893-6
Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 23.040.10
25.160.40
77.140.75
35ISO/DIS 10893-7
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 23.040.10
77.040.20
77.140.75
36ISO/DIS 10893-8
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections 40.20 23.040.10
77.040.20
77.140.75
37ISO/DIS 10893-9
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes 40.20 23.040.10
77.040.20
77.140.75
38ISO/DIS 10893-10
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 23.040.10
77.040.20
77.140.75
39ISO/DIS 10893-11
Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 23.040.10
25.160.40
77.140.75
40ISO/DIS 10893-12
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 40.20 23.040.10
77.040.20
77.140.75
42ISO 11484:2009
Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel 60.60 77.040.20
03.100.30
43ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections 90.92 23.040.10
77.140.75
77.040.20
44ISO 12094:1994
Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes 90.92 23.040.10
77.040.20
45ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing 90.92 23.040.10
77.140.75
77.040.20
46ISO 12096:1996
Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections 90.92 25.160.40
77.140.75
23.040.10
47ISO 13663:1995
Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections 90.92 25.160.40
23.040.10
77.140.75
48ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections 90.92 23.040.10
77.140.75
77.040.20
49ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections 90.92 23.040.10
77.140.75
77.040.20

11 TC 17/SC 20 General technical delivery conditions, sampling and mechanical testing methods
Standards and projects under the direct responsibility of TC 17/SC 20 Secretariat
Standard and/or project  ICS
2ISO 377:1997
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing 90.60 77.040.10
3ISO 377:1997/Cor 1:1997
 60.60 77.040.10
6ISO 404:1992
Steel and steel products -- General technical delivery requirements 90.60 77.140.01
77.080.20
7ISO 2566-1:1984
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels 90.93 77.040.10
8ISO 2566-2:1984
Steel -- Conversion of elongation values -- Part 2: Austenitic steels 90.93 77.040.10
10ISO/TR 6306:1989
Chemical analysis of steel -- Order of listing elements 60.60 77.080.20
11ISO/TR 10108:1989
Steel -- Conversion of hardness values to tensile strength values 60.60 77.040.10
12ISO 10474:1991
Steel and steel products -- Inspection documents 90.92 77.140.01
13ISO/NP 10474
Steel and steel products -- Inspection documents 10.99 77.140.01

Standards and projects under the direct responsibility of TC 17 Secretariat
Standard and/or project  ICS
3ISO 657-1:1989
Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions 90.60 77.140.70
5ISO 657-2:1989
Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions 90.93 77.140.70
8ISO 657-5:1976
Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series 90.93 77.140.70
11ISO 657-11:1980
Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties 90.93 77.140.70
13ISO 657-15:1980
Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties 90.93 77.140.70
14ISO 657-16:1980
Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties 90.93 77.140.70
15ISO 657-18:1980
Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances 90.93 47.020.05
77.140.70
16ISO 657-19:1980
Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances 90.93 77.140.70
17ISO 657-21:1983
Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions 90.93 77.140.70
19ISO 1005-1:1994
Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions 90.93 77.140.99
45.060.01
20ISO 1005-2:1986
Railway rolling stock material -- Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock -- Dimensional, balancing and assembly requirements 90.93 77.140.99
45.060.01
22ISO 1005-3:1982
Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements 90.93 45.060.01
77.140.99
23ISO 1005-4:1986
Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements 90.93 77.140.99
45.060.01
27ISO 1005-6:1994
Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions 90.93 77.140.99
45.060.01
28ISO 1005-7:1982
Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements 90.93 45.060.01
77.140.99
29ISO 1005-8:1986
Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements 90.93 45.060.01
77.140.99
30ISO 1005-9:1986
Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements 90.93 77.140.99
45.060.01
31ISO 1035-1:1980
Hot-rolled steel bars -- Part 1: Dimensions of round bars 90.93 77.140.60
32ISO 1035-2:1980
Hot-rolled steel bars -- Part 2: Dimensions of square bars 90.93 77.140.60
33ISO 1035-3:1980
Hot-rolled steel bars -- Part 3: Dimensions of flat bars 90.93 77.140.60
34ISO 1035-4:1982
Hot-rolled steel bars -- Part 4: Tolerances 90.93 77.140.60
40ISO 2605-3:1985
Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited 90.93 77.140.30
43ISO 4885:1996
Ferrous products -- Heat treatments -- Vocabulary 90.93 01.040.25
01.040.77
25.200
77.140.01
44ISO 4948-1:1982
Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition 90.93 77.080.20
45ISO 4948-2:1981
Steels -- Classification -- Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics 90.93 77.080.20
46ISO/TS 4949:2003
Steel names based on letter symbols 90.93 77.080.20
50ISO 5948:1994
Railway rolling stock material -- Ultrasonic acceptance testing 90.93 45.060.01
77.040.20
52ISO 6303:1981
Pressure vessel steels not included in ISO 2604, Parts 1 to 6 -- Derivation of long-time stress rupture properties 90.93 77.140.30
53ISO/NP 6929
Steel products -- Definitions and classification 10.99 01.040.77
77.140.01
54ISO 6929:1987
Steel products -- Definitions and classification 90.92 01.040.77
77.140.01
55ISO 6933:1986
Railway rolling stock material -- Magnetic particle acceptance testing 90.93 77.040.20
45.060.01
56ISO/TR 7468:1981
Summary of average stress rupture properties of wrought steels for boilers and pressure vessels 60.60 77.140.30
58ISO/TR 7705:1991
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications 90.93 77.080.20
61ISO 11949:1995
Cold-reduced electrolytic tinplate 90.93 77.140.50
62ISO 11950:1995
Cold-reduced electrolytic chromium/chromium oxide-coated steel 90.93 77.140.50
63ISO 11951:1995
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel 90.93 77.140.50
 TC 18 Zinc and zinc alloys - STANDBY
Subcommittees
Subcommittee Subcommittee Title
0 TC 18/SC 1 Methods of sampling and analysis of zinc and zinc alloys - STANDBY
Standards and projects under the direct responsibility of TC 18/SC 1 Secretariat
Standard and/or project  ICS
1ISO 714:1975
Zinc -- Determination of iron content -- Photometric method 90.20 77.120.60
7ISO 1169:2006
Zinc alloys -- Determination of aluminium content -- Titrimetric method 90.20 77.120.60
9ISO 1976:1975
Zinc alloys -- Determination of copper content -- Electrolytic method 90.93 77.120.60
12ISO 3750:2006
Zinc alloys -- Determination of magnesium content -- Flame atomic absorption spectrometric method 90.20 77.120.60
17ISO 3815-1:2005
Zinc and zinc alloys -- Part 1: Analysis of solid samples by optical emission spectrometry 90.93 77.120.60
18ISO 3815-2:2005
Zinc and zinc alloys -- Part 2: Analysis by inductively coupled plasma optical emission spectrometry 90.93 77.120.60
21ISO 20081:2005
Zinc and zinc alloys -- Method of sampling -- Specifications 90.93 77.120.60

1 TC 18/SC 2 Zinc alloys for casting - STANDBY
Standards and projects under the direct responsibility of TC 18/SC 2 Secretariat
Standard and/or project  ICS
1ISO 301:2006
Zinc alloy ingots intended for castings 60.60 77.120.60
2ISO 15201:2006
Zinc and zinc alloys -- Castings -- Specifications 60.60

2 TC 18/SC 3 Zinc metal - STANDBY
Standards and projects under the direct responsibility of TC 18/SC 3 Secretariat
Standard and/or project  ICS
0ISO 752:2004
Zinc ingots 90.60 77.120.60
1ISO 752:2004/Cor 1:2006
 60.60 77.120.60

3 TC 18/SC 4 Zinc and zinc alloys wrought products - STANDBY

TC 19 Preferred numbers - STANDBY
Standards and projects under the direct responsibility of TC 19 Secretariat
Standard and/or project  ICS
0ISO 3:1973
Preferred numbers -- Series of preferred numbers 90.93 17.020
1ISO 17:1973
Guide to the use of preferred numbers and of series of preferred numbers 90.93 17.020
2ISO 497:1973
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers 90.93 17.020
TC 21 Equipment for fire protection and fire fighting

Subcommittees
Subcommittee Subcommittee Title
0 TC 21/SC 2 Manually transportable fire extinguishers
Standards and projects under the direct responsibility of TC 21/SC 2 Secretariat
Standard and/or project  ICS
1ISO 3941:2007
Classification of fires 60.60 13.220.01
3ISO 7165:2009
Fire fighting -- Portable fire extinguishers -- Performance and construction 60.60 13.220.10
6ISO 11601:2008
Fire fighting -- Wheeled fire extinguishers -- Performance and construction 60.60 13.220.10
8ISO 11602-1:2000
Fire protection -- Portable and wheeled fire extinguishers -- Part 1: Selection and installation 90.92 13.220.10
9ISO/DIS 11602-1
Fire protection -- Portable and wheeled fire extinguishers -- Part 1: Selection and installation 40.60 13.220.10
10ISO 11602-2:2000
Fire protection -- Portable and wheeled fire extinguishers -- Part 2: Inspection and maintenance 90.92 13.220.10
11ISO/DIS 11602-2
Fire protection -- Portable and wheeled fire extinguishers -- Part 2: Inspection and maintenance 40.60 13.220.10

1 TC 21/SC 3 Fire detection and alarm systems
Standards and projects under the direct responsibility of TC 21/SC 3 Secretariat
Standard and/or project  ICS
1ISO 7240-1:2005
Fire detection and alarm systems -- Part 1: General and definitions 90.60 13.220.20
2ISO 7240-2:2003
Fire detection and alarm systems -- Part 2: Control and indicating equipment 90.60 13.220.20
3ISO/NP 7240-3
Fire detection and alarm systems -- Part 3: Audible alarm devices 10.99 13.220.20
4ISO 7240-4:2003
Fire detection and alarm systems -- Part 4: Power supply equipment 90.60 13.220.20
5ISO 7240-5:2003
Fire detection and alarm systems -- Part 5: Point-type heat detectors 90.60 13.220.20
6ISO 7240-5:2003/Cor 1:2005
 60.60 13.220.20
7ISO 7240-6:2004
Fire detection and alarm systems -- Part 6: Carbon monoxide fire detectors using electro-chemical cells 90.92 13.220.20
8ISO/NP 7240-6
Fire detection and alarm systems -- Part 6: Carbon monoxide fire detectors using electro-chemical cells 10.99 13.220.20
9ISO 7240-7:2003
Fire detection and alarm systems -- Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization 90.92 13.220.20
10ISO/DIS 7240-7
Fire detection and alarm systems -- Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization 40.60 13.220.20
11ISO 7240-8:2007
Fire detection and alarm systems -- Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor 60.60 13.220.20
12ISO/TS 7240-9:2006
Fire detection and alarm systems -- Part 9: Test fires for fire detectors 90.20 13.220.20
13ISO 7240-10:2007
Fire detection and alarm systems -- Part 10: Point-type flame detectors 60.60 13.220.20
14ISO 7240-11:2005
Fire detection and alarm systems -- Part 11: Manual call points 90.60 13.220.20
15ISO 7240-11:2005/Amd 1:2009
 60.60 13.220.20
16ISO 7240-12:2006
Fire detection and alarm systems -- Part 12: Line type smoke detectors using a transmitted optical beam 90.92 13.220.20
17ISO/AWI 7240-12
Fire detection and alarm systems -- Part 12: Line type smoke detectors using a transmitted optical beam 20.00 13.220.20
18ISO 7240-13:2005
Fire detection and alarm systems -- Part 13: Compatibility assessment of system components 90.93 13.220.20
19ISO/TR 7240-14:2003
Fire detection and alarm systems -- Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings 90.20 13.220.20
20ISO 7240-15:2004
Fire detection and alarm systems -- Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor 90.93 13.220.20
21ISO 7240-15:2004/Cor 1:2005
 60.60 13.220.20
22ISO 7240-16:2007
Fire detection and alarm systems -- Part 16: Sound system control and indicating equipment 60.60 13.220.20
23ISO/FDIS 7240-17
Fire detection and fire alarm systems -- Part 17: Short-circuit isolators 50.00 13.220.20
24ISO/DIS 7240-18
Fire detection and fire alarm systems -- Part 18: Input/output devices 40.60 13.220.20
25ISO 7240-19:2007
Fire detection and alarm systems -- Part 19: Design, installation, commissioning and service of sound systems for emergency purposes 60.60 13.220.20
26ISO/DIS 7240-20
Fire detection and alarm systems -- Part 20: Aspirating smoke detectors 40.60 13.220.20
27ISO 7240-21:2005
Fire detection and alarm systems -- Part 21: Routing equipment 90.60 13.220.20
28ISO 7240-22:2007
Fire detection and alarm systems -- Part 22: Smoke-detection equipment for ducts 90.92 13.220.20
29ISO/DIS 7240-24
Fire detection and fire alarm systems -- Part 24: Sound-system loudspeakers  40.20 13.220.20
30ISO/DIS 7240-25
Fire detection and fire alarm systems -- Part 25: Components using radio transmission paths 40.20 13.220.20
31ISO 7240-27:2009
Fire detection and alarm systems -- Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor 60.60 13.220.20
32ISO 7240-28:2008
Fire detection and alarm systems -- Part 28: Fire protection control equipment 60.60 13.220.20
33ISO 12239:2003
Fire detection and fire alarm systems -- Smoke alarms 90.60 13.220.20

2 TC 21/SC 5 Fixed firefighting systems using water
Standards and projects under the direct responsibility of TC 21/SC 5 Secretariat
Standard and/or project  ICS
0ISO 6182-1:2004
Fire protection -- Automatic sprinkler systems -- Part 1: Requirements and test methods for sprinklers 90.60 13.220.20
2ISO 6182-2:2005
Fire protection -- Automatic sprinkler systems -- Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms 90.60 13.220.20
5ISO 6182-3:2005
Fire protection -- Automatic sprinkler systems -- Part 3: Requirements and test methods for dry pipe valves 90.60 13.220.20
6ISO 6182-4:1993
Fire protection -- Automatic sprinkler systems -- Part 4: Requirements and test methods for quick-opening devices 90.92 13.220.20
7ISO/NP 6182-4
Fire protection -- Automatic sprinkler systems -- Part 4: Requirements and test methods for quick-opening devices 10.99 13.220.20
8ISO 6182-5:2006
Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves 90.20 13.220.20
10ISO 6182-6:2006
Fire protection -- Automatic sprinkler systems -- Part 6: Requirements and test methods for check valves 90.20 13.220.20
11ISO 6182-7:2004
Fire protection -- Automatic sprinkler systems -- Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers 90.60 13.220.20
12ISO 6182-8:2006
Fire protection -- Automatic sprinkler systems -- Part 8: Requirements and test methods for pre-action dry alarm valves 90.20 13.220.20
13ISO 6182-9:2005
Fire protection -- Automatic sprinkler system -- Part 9: Requirements and test methods for water mist nozzles 90.60 13.220.20
14ISO 6182-10:2006
Fire protection -- Automatic sprinkler systems -- Part 10: Requirements and test methods for domestic sprinklers 90.20 13.220.20
15ISO 6182-11:2003
Fire protection -- Automatic sprinkler systems -- Part 11: Requirements and test methods for pipe hangers 90.93 13.220.20
16ISO/FDIS 6182-12
Fire protection -- Automatic sprinkler systems -- Part 12: Requirements and test methods for grooved-end components for steel pipe systems 50.92 13.220.20
17ISO 6183:1990
Fire protection equipment -- Carbon dioxide extinguishing systems for use on premises -- Design and installation 90.92 13.220.10
18ISO 6184-1:1985
Explosion protection systems -- Part 1: Determination of explosion indices of combustible dusts in air 90.93 13.230
19ISO 6184-2:1985
Explosion protection systems -- Part 2: Determination of explosion indices of combustible gases in air 90.93 13.230
20ISO 6184-3:1985
Explosion protection systems -- Part 3: Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures 90.93 13.230
21ISO 6184-4:1985
Explosion protection systems -- Part 4: Determination of efficacy of explosion suppression systems 90.93 13.230

3 TC 21/SC 6 Foam and powder media and fixed firefighting systems using foam and powder
Standards and projects under the direct responsibility of TC 21/SC 6 Secretariat
Standard and/or project  ICS
2ISO 7202:1987
Fire protection -- Fire extinguishing media -- Powder 90.92 13.220.10
3ISO 7203-1:1995
Fire extinguishing media -- Foam concentrates -- Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids 90.92 13.220.10
4ISO/AWI 7203-1
Fire extinguishing media -- Foam concentrates -- Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids 20.00 13.220.10
5ISO 7203-2:1995
Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids 90.92 13.220.10
6ISO/AWI 7203-2
Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids 20.00 13.220.10
7ISO/AWI 7203-3
Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids 20.00 13.220.10
8ISO 7203-3:1999
Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids 90.92 13.220.10

4 TC 21/SC 8 Gaseous media and firefighting systems using gas
Standards and projects under the direct responsibility of TC 21/SC 8 Secretariat
Standard and/or project  ICS
0ISO 5923:1989
Fire protection -- Fire extinguishing media -- Carbon dioxide 90.60 13.220.10
1ISO 6183
Fire protection equipment -- Carbon dioxide extinguishing systems for use on premises -- Design and installation 60.00 13.220.10
2ISO 7201-1:1989
Fire protection -- Fire extinguishing media -- Halogenated hydrocarbons -- Part 1: Specifications for halon 1211 and halon 1301 90.93 13.220.10
3ISO 7201-2:1991
Fire extinguishing media -- Halogenated hydrocarbons -- Part 2: Code of practice for safe handling and transfer procedures of halon 1211 and halon 1301 90.93 13.220.10
4ISO/TS 12854:2009
Gaseous media fire-extinguishing systems -- Physical properties and system design -- Scaling factors for Class B fuels other than heptane 60.60 13.220.10
5ISO/TS 13075:2009
Gaseous-media fire-extinguishing systems -- Engineered extinguishing systems -- Flow calculation implementation method and flow verification and testing for approval 60.60 13.220.10
7ISO 14520-1:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 1: General requirements 90.20 13.220.10
8ISO 14520-1:2006/Cor 1:2007
 60.60 13.220.10
11ISO 14520-2:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 2: CF3I extinguishant 90.20 13.220.10
15ISO 14520-5:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 5: FK-5-1-12 extinguishant 90.20 13.220.10
17ISO 14520-6:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 6: HCFC Blend A extinguishant 90.20 13.220.10
19ISO 14520-8:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 8: HFC 125 extinguishant 90.20 13.220.10
22ISO 14520-9:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 9: HFC 227ea extinguishant 90.20 13.220.10
24ISO 14520-10:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 10: HFC 23 extinguishant 90.60 13.220.10
25ISO 14520-11:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 11: HFC 236fa extinguishant 90.60 13.220.10
28ISO 14520-12:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 12: IG-01 extinguishant 90.60 13.220.10
30ISO 14520-13:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 13: IG-100 extinguishant 90.60 13.220.10
31ISO 14520-14:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 14: IG-55 extinguishant 90.60 13.220.10
33ISO 14520-15:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 15: IG-541 extinguishant 90.60 13.220.10
35ISO/DIS 15779
Condensed-aerosol fire-extinguishing systems -- Physical properties and system design -- General requirements 40.20 13.220.10
36ISO 16003:2008
Components for fire-extinguishing systems using gas-- Requirements and test methods -- Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves 60.60 13.220.10
37ISO/TS 20885:2003
Gaseous media fire-extinguishing systems -- Area coverage fire test procedure -- Engineered and pre-engineered extinguishing units 90.20 13.220.10

5 TC 21/SC 11 Smoke and heat control systems and components
Standards and projects under the direct responsibility of TC 21/SC 11 Secretariat
Standard and/or project  ICS
0ISO 21927-1:2008
Smoke and heat control systems -- Part 1: Specification for smoke barriers 60.60 13.220.20
1ISO 21927-2:2006
Smoke and heat control systems -- Part 2: Specification for natural smoke and heat exhaust ventilators 60.60 13.220.20
2ISO 21927-2:2006/NP Amd 1
 10.99 13.220.20
3ISO 21927-3:2006
Smoke and heat control systems -- Part 3: Specification for powered smoke and heat exhaust ventilators 60.60 13.220.20
4ISO 21927-3:2006/NP Amd 1
 10.99 13.220.20
5ISO/NP 21927-9
Smoke and heat control systems -- Part 9: Specification for control equipment 10.99 13.220.20
6ISO/NP 21927-10
Smoke and heat control systems -- Part 10: Specification for power output devices 10.99

Standards and projects under the direct responsibility of TC 21 Secretariat
Standard and/or project  ICS
0ISO 6309:1987
Fire protection -- Safety signs 90.93 01.080.99
13.220.01
1ISO 6790:1986
Equipment for fire protection and fire fighting -- Graphical symbols for fire protection plans -- Specification 90.93 01.080.30
13.220.01
2ISO 8421-1:1987
Fire protection -- Vocabulary -- Part 1: General terms and phenomena of fire 90.93 01.040.13
13.220.01
3ISO 8421-2:1987
Fire protection -- Vocabulary -- Part 2: Structural fire protection 90.93 01.040.13
13.220.01
4ISO 8421-3:1989
Fire protection -- Vocabulary -- Part 3: Fire detection and alarm 90.93 01.040.13
13.220.01
5ISO 8421-4:1990
Fire protection -- Vocabulary -- Part 4: Fire extinction equipment 90.93 01.040.13
13.220.01
6ISO 8421-5:1988
Fire protection -- Vocabulary -- Part 5: Smoke control 90.93 01.040.13
13.220.01
7ISO 8421-6:1987
Fire protection -- Vocabulary -- Part 6: Evacuation and means of escape 90.93 01.040.13
13.220.01
8ISO 8421-7:1987
Fire protection -- Vocabulary -- Part 7: Explosion detection and suppression means 90.93 01.040.13
13.220.01
9ISO 8421-8:1990
Fire protection -- Vocabulary -- Part 8: Terms specific to fire-fighting, rescue services and handling hazardous materials 90.93 01.040.13
13.220.01
10ISO 16852:2008
Flame arresters -- Performance requirements, test methods and limits for use 60.60 13.220.10
11ISO 16852:2008/Cor 1:2008
 60.60 13.220.10

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm