Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

Y32.9-1972
Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building Construction
SI10-2002
IEEE/ASTM Standard for Use of the International System of Units (SI): The Modern Metric System
SI10-1997
Standard for Use of the International System of Units (SI): The Modern Metric System
N449.1-1978
American National Standard Procedures for Periodic Inspection of Cobalt-60 and Cesium-137 Teletherapy Equipment
N323a-1997
Radiation Protection Instrumentation Test and Calibration
N323-1978
American National Standard Radiation Protection Instrumentation Test and Calibration
N322-1997
American National Standard Inspection,Test, Construction, and Performance Requirements for Direct Reading Electrostatic/Electroscope Type Dosimeters
N320-1979
American National Standard Performance Specifications for Reactor Emergency Radiological Monitoring Instrumentation
N317-1980
American National Standard Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring
JSTD016-1995
Standard for Information TechnologySoftware Life Cycle ProcessesSoftware DevelopmentAcquirer-Supplier Agreement (Issued for Trial Use)
ISO/IEEE 11073-30300:2004(E)
ISO/IEEE Health informatics-Point-of-care medical device communication-Part 30300: Transport profile-Infrared wireless
ISO/IEEE 11073-30200:2004(E)
ISO/IEEE Health informatics-Point-of-care medical device communication-Part 30200: Transport profile-Cable connected
ISO/IEEE 11073-20101:2004(E)
ISO/IEEE Health informatics-Point-of-care medical device communication-Part 20101: Application profiles-Base Standard
IEEE Std N42.48-2008
American National Standard Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland Security
IEEE Std N42.46-2008
Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
IEEE Std N42.43-2006
American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors used for Homeland Security
IEEE Std C95.7-2005
IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz
IEEE Std C93.5-1997
American National Standard Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment
IEEE Std C63.19-2007
American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids
IEEE Std C63.17-2006
American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices
IEEE Std C62.48-2005
IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices
IEEE Std C62.45-2002
IEEE Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000V and Less) AC Power Circuits
IEEE Std C62.43-2005
Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less than 1000 V rms or1200 Vdc) Data, Communications, and Signaling Circuits
IEEE Std C62.42-2005
IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) or 1200 V (dc)] Circuits
IEEE Std C62.41.2-2002
IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000V and Less) AC Power Circuits
IEEE Std C62.41.1-2002
IEEE Guide on the Surge Environment in Low-Voltage (1000V and Less) AC Power Circuits
IEEE Std C62.32-2004
Standard Test Methods for Low-Voltage Air Gap Surge-Protective Device Components (Excluding Valve and Expulsion Types)
IEEE Std C62.31-2006
Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components
IEEE Std C62.21-2003
Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 Volts and Greater
IEEE Std C62.11a-2008
Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) Amendment 1: Short-Circuit Tests for Station, Intermediate, and Distribution Arresters
IEEE Std C62.11-2005
Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV)
IEEE Std C57.91-1995/Cor.1-2002
Corrigenda to IEEE Std C57.91-1995, IEEE Guide for Loading Mineral-Oil- Immersed Transformers
IEEE Std C57.21-2008
IEEE Standard Requirements, Terminology and Test Code for Shunt Reactors Rated Over 500 kVA
IEEE Std C57.19.03-1996/Cor1-2005
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications- Corrigendum 1
IEEE Std C57.19.00-2004
IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings
IEEE Std C57.18.10-1998 (R2003)
IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers
IEEE Std C57.146-2005
IEEE Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers
IEEE Std C57.144-2004
IEEE Guide for Metric Conversion of Transformer Standards
IEEE Std C57.13-2008
IEEE Standard Requirements for Instrument Transformers
IEEE Std C57.13.6-2005
IEEE Standard for High Accuracy Instrument Transformers
IEEE Std C57.13.2-2005
Standard Conformance Test Procedure for Instrument Transformers
IEEE Std C57.13.1-2006
IEEE Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.129-2007
IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
IEEE Std C57.127-2007
IEEE Guide for the Detection & Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers & Reactors
IEEE Std C57.12.90-2006
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE Std C57.12.70-2000
for Terminal Markings and Connections for Distribution and Power Transformers
IEEE Std C57.12.44-2005
IEEE Requirements for Secondary Network Protectors
IEEE Std C57.12.40-2006
IEEE Standard Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid Immersed)
IEEE Std C57.12.37-2006
IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data
IEEE Std C57.12.36-2007
IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
IEEE Std C57.12.35-2007
IEEE Standard for Bar Coding for Distribution Transformers
IEEE Std C57.12.34-2004
IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 2500 kVA and Smaller-High Voltage: 34 500 GrdY/19 920 Volts and Below; Low Voltage: 480 Volts and Below
IEEE Std C57.12.32-2002
IEEE Standard for Submersible Equipment-Enclosure Integrity
IEEE Std C57.12.31-2002
IEEE Standard for Pole Mounted Equipment-Enclosure Integrity
IEEE Std C57.12.29-2005
IEEE Standard for Pad-Mounted Equipment-Enclosure Integrity for Coastal Environments
IEEE Std C57.12.24-2000
American National Standard for Transformers--Underground-Type, Three-Phase Distribution Transformers, 2500 kVA and Smaller; High Voltage, 34 5000 GrdY/19 920 Volts and below; Low Voltage, 480 Volts and Below--Requirements
IEEE Std C57.12.22-1993 (R1998)
American National Standard for Transformers? Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers with High-Voltage Bushings, 2500 kVA and Smaller: High-Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and
IEEE Std C57.12.21-1992
American National Standard Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distributuon Transformers With High Voltage Bushings; High-voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 volts; 167 kVA and Smaller
IEEE Std C57.12.20-2005
IEEE Standard for Overhead-Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
IEEE Std C57.12.10-1997
Transformers - 230 kV and Below, 8333/10 417 kVA 3PH without Load Tap Changing; 100 000 kVA with Load Tap Changing - Safety Requirements
IEEE Std C57.12.00-2006
IEEE Standard for Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE Std C57.106-2006
IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
IEEE Std C50.13-2005
IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
IEEE Std C50.12-2005
IEEE Standard for Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above
IEEE Std C37.95-2002
IEEE Guide for Protective Relaying of Utility-Consumer Interconnections
IEEE Std C37.94-2002
IEEE Standard for N Times 64 Kilobit per Second Optical Fiber Interfaces between Teleprotection and Multiplexer Equipment
IEEE Std C37.93-2004
IEEE Guide for Power System Protective Relay Applications of Audio Tones Over Voice Grade Channels
IEEE Std C37.92-2005
IEEE Standard for Analog Inputs to Protective Relays from Electronic Voltage and Current Transducers
IEEE Std C37.91-2008
IEEE Guide for Protecting Power Transformers
IEEE Std C37.90-2005
Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE Std C37.90.2-2004
IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
IEEE Std C37.66-2005
IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
IEEE Std C37.63-2005
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
IEEE Std C37.60/Cor.1-2004
IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems up to 38 kV-Corrigendum 1
IEEE Std C37.59-2002
IEEE Standard Requirements for Conversion of Power Switchgear Equipment
IEEE Std C37.53.1-1989
American National Standard for Switchgear?High Voltage Current Limiting Motor-Starter Fuses?Conformance Test Procedures
IEEE Std C37.48-2005
Revision of IEEE Std C37.48-1997. IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
IEEE Std C37.48.1-2002
Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38 kV
IEEE Std C37.47-2000
American National Standard Specifications for Distribution Fuse Disconnecting Switches, Fuse Supports, and Current-Limiting Fuses
IEEE Std C37.46-2001
American National Standard Specifications for Power Fuses and Fuse Disconnecting
IEEE Std C37.40-2003
Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories (Revision of IEEE Std C37.40-1993)
IEEE Std C37.24-2003
IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
IEEE Std C37.23-2003
IEEE Standard for Metal-Enclosed Bus
IEEE Std C37.231-2006
IEEE Recommended Practice for Microprocessor-Based Protection Equipment Firmware Control
IEEE Std C37.230-2007
IEEE Guide for Protective Relay Applications to Distribution Lines
IEEE Std C37.21-2005
IEEE Standard for Control Switchboards
IEEE Std C37.20.7-2007
IEEE guide for testing metal-enclosed switchgear rated up to 38 kV for internal arcing faults
IEEE Std C37.20.4-2001
Standard for Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear
IEEE Std C37.20.3-2001
Standard for Metal-Enclosed Interrupter Switchgear
IEEE Std C37.20.1a-2005
IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests - Minimum Areas for Multiple Cable Connections
IEEE Std C37.16-2000
American National Standard Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors?Preferred Ratings, Related Requirements, and Application Recommendations
IEEE Std C37.14-2002
IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
IEEE Std C37.13.1-2006
Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
IEEE Std C37.12.1-2007
IEEE Guide for High-Voltage (>1000 V) Circuit Breaker Instruction Manual Content
IEEE Std C37.119-2005
Guide for Breaker Failure Protection of Power Circuit Breakers
IEEE Std C37.118-2005
IEEE Standard for Synchrophasors for Power Systems
IEEE Std C37.115-2003
IEEE Standard Test Method for Use in the Evaluation of Message Communications between Intelligent Electronic Devices in an Integrated Substation Protection, Control, and Data Acquisition System
IEEE Std C37.114-2004
IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines
IEEE Std C37.110-2007
IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes
IEEE Std C37.106-2003
IEEE Guide for Abnormal Frequency Protection for Power Generating Plants (Revision of ANSI/IEEE C37.106-1987)
IEEE Std C37.102-2006
IEEE Guide for AC Generator Protection
IEEE Std C37.101-2006
IEEE Guide for Generator Ground Protection
IEEE Std C37.100.1-2007
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
IEEE Std C37.09a-2005
IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
IEEE Std C37.06-2000
American National Standard for Switchgear?AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis?Preferred Ratings and Related Required Capabilities
IEEE Std C37.04-1999
IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
IEEE Std C37.013A-2007
IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis -Amendment 1: Supplement for use with Generators Rated 10-100 MVA
IEEE Std C37.012-2005
IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
IEEE Std C37.011-2005
IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
IEEE Std C135.3-2001
IEEE Standard for Zinc-Coated Lag Screws for Overhead Line Construction
IEEE Std 99-2007
IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment
IEEE Std 98-2002
IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials An Errata is available
IEEE Std 960/1177-1993
IEEE Standard FASTBUS Modular High-Speed Data Acquisition and Control System and IEEE FASTBUS Standard Routines
IEEE Std 958-2003
IEEE Guide for Application of AC Adjustable-Speed Drives on 2400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations
IEEE Std 957-2005
IEEE Guide for Cleaning Insulators
IEEE Std 946-2004
IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations
IEEE Std 937-2007
IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
IEEE Std 930-2004
IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
IEEE Std 8802-11:2005/Amd.6-2006
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 11,Amendment 6: Medium Access Control(MAC) Security Enhancements
IEEE Std 8802-11:2005/Amd.5-2006
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11,Amendment 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in Europe
IEEE Std 8802-11:2005/Amd.4-2006
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11, Amendment 4: Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE Std 841-2001
for Petroleum and Chemical Industry-Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 370 kW (500 hp) (Revision of IEEE Std 841-1994
IEEE Std 837-2002
IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
IEEE Std 836-2001
Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers (Revision of IEEE Std 836-1991)
IEEE Std 835-1994
IEEE Standard Power Cable Ampacity Tables
IEEE Std 828-2005
IEEE Standard for Software Configuration Management Plans
IEEE Std 824-2004
IEEE Standard for Series Capacitor Banks in Power Systems
IEEE Std 82-2002
IEEE Standard Test Procedures for Impulse Voltage Tests on Insulated Conductors
IEEE Std 820-2005
IEEE Standard Telephone Loop Performance Characteristics
IEEE Std 802b-2004
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture Amendment 2: Registration of Object Identifiers
IEEE Std 802a-2003
IEEE Standard for Local and Metropolitan Area Networks-Overview and Architecture-Amendment 1: Ethertypes for protype and vendor-specific protocol development
IEEE Std 802.5w-2000
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Part 5: Token ring access method and physical layer specifications--Corrigendum 1 (Corrigendum to ISO/IEC 8802-5:1998 including ISO/
IEEE Std 802.5v-2001
Standard for Information technology---Telecommunications and information exchange between systems---Local and metropolitan area networks---Specific requirements---Part 5: Token Ring access method and Physical Layer specifications---Amendment 5: Gigabit To
IEEE Std 802.3aq-2006
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 3, Amendment 2: Physical Layer and Management Parameters for 10 Gb/s Operation, Type 10
IEEE Std 802.3ap-2007
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 3, Amendment 4: Ethernet Operation over Electrical Backplanes
IEEE Std 802.3-2005/Cor 1-2006
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks-- Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and
IEEE Std 802.1X-2004
IEEE Standard for Local and metropolitan area networks Port-Based Network Access Control
IEEE Std 802.1w-2001
Amendment to IEEE Std 802.1D, 1998 Edition (ISO/IEC 15802-3:1998) and IEEE Std 802.1t-2001, IEEE Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Common specifications
IEEE Std 802.1v-2001
for Local and metropolitan area networks--Virtual Bridged Local Area Networks--Amendment 2: VLAN Classification by Protocol and Port (Amendment to IEEE Std 802.1Q, 1998 Edition)
IEEE Std 802.1u-2001
for Local and metropolitan area networks--Virtual Bridged Local Area Networks--Amendment 1: Technical and editorial corrections (Amendment to IEEE Std 802.1Q, 1998 Edition)
IEEE Std 802.1D-2004
IEEE Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges
IEEE Std 802.1ak-2007
IEEE Standard for Local and metropolitan area metworks - Virtual Bridged Local Area Networks - Amendment 7: Multiple Registration Protocol
IEEE Std 802.1ah-2008
IEEE Standard for Local and metropolitan area networks- Virtual Bridged Local Area Networks Amendment 7: Provider Backbone Bridges
IEEE Std 802.1ag-2007
IEEE Standard for Local and metropolitan area networks -Virtual Bridged
IEEE Std 802.1AE-2006
IEEE Standard for Local and Metropolitan Area Networks-Media Access Control (MAC) Security
IEEE Std 802.1ad-2005
IEEE Standards for Local and metropolitan area networks-Virtual Bridged Local Area Networks-Revision-Amendment 4: Provider Bridges
IEEE Std 802.1AB-2005
IEEE Standard for Local and metropolitan area networks Station and Media Access Control Connectivity Discovery
IEEE Std 802.17b-2007
Information technology - Local and metropolitan area networks - Specific requirements - Part 17: Resilient packet ring (RPR) access method and physical layer specifications - Amendment 2: Spatially aware sublayer
IEEE Std 802.17a-2004
IEEE Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges - Amendment 1: Bridging of IEEE Std 802.17
IEEE Std 802.17-2004
IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 17: Resilient packet ring (RPR) access method and physical layer specifications
IEEE Std 802.16f-2005
IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Amendment 1 - Management Information Base
IEEE Std 802.16e-2005 and IEEE Std 802.16-2004/Cor
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems Amendment for Physical and Medium Access Control Layers for Combined Fixed and Mobile Operation in Licensed Bands
IEEE Std 802.16a-2003
IEEE Standard for Local and metropolitan area networks-Part 16: Air Interface for Fixed Broadband Wireless Access Systems Amendment 2: Medium Access Control Modifications and Additional Physical Layer Specifications for 2-11 GHz
IEEE Std 802.16.2-2004
IEEE Recommended Practice for Local and Metropolitan Area Networks Coexistence of Fixed Broadband Wireless Access Systems
IEEE Std 802.16/Conformance04-2006
802.16_CONFORMANCE04-2006
IEEE Std 802.16/Conformance02-2003
IEEE Standard Conformance to IEEE Std 802.16 Part 2: Test Suite Structure and Test Purposes for 10-66 GHz WirelessMAN-SC Air Interface
IEEE Std 802.15.4a-2007
IEEE Standard for Information Technology - PART 15.4: Wireless MAC and PHY Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs): Amendment 1: Add Alternate PHY
IEEE Std 802.15.4-2006
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for
IEEE Std 802.15.1-2005
IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 15.1: Wireless medium access control (MAC) and physical layer (PHY) specifications
IEEE Std 802.11r-2008
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Am
IEEE Std 802.11k-2008
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Am
IEEE Std 802.11j-2004
IEEE Standard for Information technology-Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
IEEE Std 802.11e-2005
IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
IEEE Std 765-2006
IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE Std 762-2006
IEEE Standard for Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
IEEE Std 754-2008
IEEE Standard for Floating-Point Arithmetic
IEEE Std 741-2007
IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
IEEE Std 7-4.3.2-2003
IEEE Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations
IEEE Std 738-2006
IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors
IEEE Std 690-2004
IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE Std 686-2008
IEEE Standard Radar Definitions
IEEE Std 666-2007
IEEE Design Guide for Electric Power Service Systems for Generating Stations
IEEE Std 650-2006
IEEE Standard Qualification of Class 1E Battery Chargers and Inverters for Nuclear Power Generating Stations
IEEE Std 649-2006
IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
IEEE Std 647-2006
IEEE Standard Specification Format Guide and Test Procedure for Single-Axis Laser Gyros
IEEE Std 643-2004
IEEE Guide for Power-Line Carrier Applications
IEEE Std 635-2003
IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
IEEE Std 634-2004
IEEE Standard Cable-Penetration Fire Stop Qualification Test
IEEE Std 62.2-2004
IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery
IEEE Std 610.12-1990 (R2002)
IEEE Standard Glossary of Software Engineering Terminology
IEEE Std 602-2007
IEEE Recommended Practice for Electric Systems in Health Care Facilities (White Book)
IEEE Std 577-2004
Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Facilities
IEEE Std 572-2006
IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
IEEE Std 539-2005
IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std 532-2007
IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
IEEE Std 528-2001
Standard for Inertial Sensor Terminology (Revision of IEEE Std 528-1994)
IEEE Std 525-2007
IEEE Guide for the Design and Installation of Cable Systems in Substations
IEEE Std 524-2003
IEEE Guide to the Installation of Overhead Transmission Line Conductors
IEEE Std 522-2004
IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines
IEEE Std 515-2004
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications
IEEE Std 493-2007
Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book)
IEEE Std 488.1-2003
IEEE Standard for Higher Performance Protocol for the Standard Digital Interface for Programmable Instrumentation
IEEE Std 487-2000
Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations (Revision of IEEE Std 487-1992)
IEEE Std 463-2006
IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
IEEE Std 450-2002
IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
IEEE Std 436-1991
IEEE guide for making corona (partial discharge) measurements on electronics transformers
IEEE Std 434-2006
IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
IEEE Std 421.4-2004
IEEE Guide for the Preparation of Excitation System Specifications
IEEE Std 404-2006
IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2 500 V to 500 000 V
IEEE Std 400.3-2006
IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment
IEEE Std 400.2-2004
IEEE Guide for Field Testing of Shielded Power Cable Using Very Low Frequency (VLF)
IEEE Std 393-1991
IEEE Standard for Test Procedures for Magnetic Cores
IEEE Std 386-2006
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V
IEEE Std 383-2003
IEEE Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
IEEE Std 382-2006
IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
IEEE Std 344-2004
IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 336-2005
IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
IEEE Std 334-2006
IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
IEEE Std 323-2003
IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 315A-1986
IEEE Standards Graphic Symbols for Electrical and Electronics Diagrams
IEEE Std 303-2004
IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
IEEE Std 299-2006
IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
IEEE Std 270-2006
IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
IEEE Std 269a-2007
IEEE Standard for Methods for Measuring Transmission Amendment 1 (POD). This is an amendment to IEEE Std 269-2002.
IEEE Std 26702-2007
Systems Engineering - Application & Management of the Systems Engineering Process
IEEE Std 2600-2008
IEEE Standard for Information Technology: Hardcopy Device and System Security
IEEE Std 260.1-2004
IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE Std 23026-2006
Software Engineering---Recommended Practice for the Internet---Web Site Engineering, Web Site Management, and Web Site Life Cycle
IEEE Std 205-2001
Standard on Television: Measurement of Luminance Signal Levels (Revision of IEEE Std 205-1958)
IEEE Std 1900.2-2008
IEEE Recommended Practice for the Analysis of In-Band and Adjacent Band Interference and Coexistence Between Radio Systems
IEEE Std 1900.1-2008
IEEE Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
IEEE Std 1850-2005
IEEE Standard for Property Specification Language (PSL)
IEEE Std 1800-2005
IEEE Standard for SystemVerilog - Unified Hardware Design, Specification, and Verification Language
IEEE Std 1686-2007
IEEE Standard for Substation Intelligent Electronic Devices (IEDs) Cyber Security Capabilities
IEEE Std 1680-2006
IEEE Standard for Environmental Assessment of Personal Computer Products, Including Laptop Personal Computers, Desktop Personal Computers, and Personal Computer Monitors
IEEE Std 1671-2006
IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML
IEEE Std 1667-2006
IEEE Standard Protocol for Authentication in Host Attachments of Transient Storage Devices
IEEE Std 1666-2005
IEEE Standard SystemCr Language Reference Manual
IEEE Std 1661-2007
IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems
IEEE Std 1650-2005
IEEE Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
IEEE Std 1647-2006
IEEE Standard for the Functional Verification Language 'e'
IEEE Std 1646-2004
IEEE Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation
IEEE Std 1641-2004
IEEE Standard for Signal and Test Definition
IEEE Std 1633-2008
IEEE Recommended Practice on Software Reliability
IEEE Std 1631-2008
IEEE Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USA
IEEE Std 1623-2004
IEEE Guide for the Functional Specification of Medium Voltage (1 kV-35kV) Electronic Shunt Devices for Dynamic Voltage Compensation
IEEE Std 1621-2004
IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer Environments
IEEE Std 16-2004
IEEE Standard for Electrical and Electronic Control Apparatus on Rail Vehicles
IEEE Std 1619-2007
IEEE Standard for Cryptographic Protection of Data on Block-Oriented Storage Devices
IEEE Std 1617-2007
IEEE Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium-Voltage Underground Cables
IEEE Std 1616-2004
IEEE Standard for Motor Vehicle Event Data Recorders (MVEDRs)
IEEE Std 1615-2007
IEEE Recommended Practice for Network Communication in Electric Power Substations
IEEE Std 1613a-2008
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations Amendment 1: Add Requirements for Altitude and Altitude Derating Factors
IEEE Std 1613-2003/Cor.1-2006
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations - Corrigendum 1
IEEE Std 1609.4-2006
IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE)-Multi-channel Operation
IEEE Std 1609.3-2007
IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE)-Networking Services
IEEE Std 1609.2-2006
IEEE Trial-Use Standard for Wireless Access in Vehicular Environments-Security Services for Applications and Management Messages
IEEE Std 1609.1-2006
IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE)-Resource Manager
IEEE Std 16085-2006
Systems and software engineering-Life cycle processes-Risk management
IEEE Std 1599-2008
IEEE Recommended Practice for Defining a Commonly Acceptable Musical Application Using XML
IEEE Std 1594-2008
IEEE Standard for Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility Lines
IEEE Std 1590-2003
IEEE Recommended Practice for the Electrical Protection of Optical Fiber Communication Facilities Serving, or Connected to, Electrical Supply Locations
IEEE Std 1588-2008
IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Std 1584a-2004
IEEE Guide for Performing Arc-Flash Hazard Calculations-Amendment 1
IEEE Std 1573-2003
IEEE Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance
IEEE Std 1572-2004
IEEE Guide for Application of Composite-Line Post Insulators
IEEE Std 1568-2003
IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles
IEEE Std 1566-2005
IEEE Standard for Performance of Adjustable Speed AC Drives Rated 375 KW (500 HP) and Larger
IEEE Std 1560-2005
IEEE Standard for Methods of Measurement of Radio-Frequency Power-Line Interference Filter in the Range of 100 Hz to 10 GHz
IEEE Std 1558-2004
IEEE Standard for Software Documentation for Rail Equipment and Systems
IEEE Std 1554-2005
IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std 1553-2002
IEEE Standard for Voltage-Endurance Testing of Form-Wound Coils and Bars for Hydrogenerators
IEEE Std 1547.1-2005
IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems
IEEE Std 1541-2002
IEEE Trial-Use Standard for Prefixes for Binary Multiples
IEEE Std 1536-2002
IEEE Standard for Rail Transit Vehicle Battery Physical Interface
IEEE Std 1531-2003
IEEE Guide for Application and Specification of Harmonic Filters
IEEE Std 1528a-2005
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Amendment 1: CAD File for Human Head Model (SAM Phantom)
IEEE Std 15288-2008
Adoption of ISO/IEC 15288:2008 Systems and software engineering - System life cycle processes
IEEE Std 1528-2003
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
IEEE Std 1527-2006
IEEE Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas
IEEE Std 1526-2003
IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
IEEE Std 1523-2002
IEEE Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulation
IEEE Std 1522-2004
IEEE Trial-Use Standard for Testability and Diagnosability Characteristics and Metrics
IEEE Std 1521-2003
IEEE Trial-Use Standard for Measurement of Video Jitter and Wander
IEEE Std 1513-2001
Recommended Practice for Qualification of Concentrator Photovoltaic (PV) Receiver Sections and Modules
IEEE Std 1512-2006
IEEE Standard for Common Incident Management Message Sets for Use by Emergency Management Centers
IEEE Std 1512.3-2006
IEEE Standard for Hazardous Material Incident Management Message Sets for Use by Emergency Management Centers
IEEE Std 1512.2-2004
IEEE Standard for Public Safety Incident Management Message Sets for Use by Emergency Management Centers
IEEE Std 1511-2004
IEEE Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5 kV through 46 kV
IEEE Std 1505-2006
IEEE Standard for Receiver Fixture Interface
IEEE Std 1500-2005
IEEE Standard Testability Method for Embedded Core-based Integrated Circuits
IEEE Std 1493-2006
IEEE Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories
IEEE Std 1491-2005
IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
IEEE Std 1490-2003
IEEE Guide Adoption of PMI Standard A Guide to the Project Management Body of Knowledge
IEEE Std 1484.4-2007
IEEE Trial-Use Recommended Practice for Digital Rights Expression
IEEE Std 1484.20.1-2007
IEEE Standard for Learning Technology¨Data Model for Reusable Competency Definitions
IEEE Std 1484.1-2003
IEEE Standard for Learning Technology - Learning Technology Systems Architecture (LTSA)
IEEE Std 1484.12.3-2005
IEEE Standard for Learning Technology - Extensible Markup Language (XML) Schema Definition Language Binding for Learning Object Metadata
IEEE Std 1484.11.2-2003
Standard for Learning Technology - ECMAScript Application Programming Interface for Content to Runtime Services Communication
IEEE Std 1484.11.1-2004
IEEE Standard for Learning Technology - Data Model for Content Object Communication
IEEE Std 1481.1-2003
IEEE Standard for Learning Technology-Learning Technology Systems Architecture (LTSA)
IEEE Std 14764-2006
ISO/IEC Standard for Software Engineering- Software Life Cycle Processes-Maintenance
IEEE Std 1474.3-2008
IEEE Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional Allocations
IEEE Std 1474.2-2003
IEEE Standard for User Interface Requirements in Communications Based Train Control (CBTC) Systems
IEEE Std 1474.1-2004
IEEE Standard for Communications-Based Train Control (CBTC) Performance and Functional Requirements
IEEE Std 1458-2005
IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE Std 1453-2004
IEEE Recommended Practice for Measurement and Limits of Voltage Flicker on AC Power Systems
IEEE Std 14515-2-2003
Information technology-Portable Operating System Interface (POSIX)-Test methods for measuring conformance to POSIX-Part 2: Shell and Utilities
IEEE Std 1451.4-2004
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators-Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS)
IEEE Std 1451.3-2003
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Digital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems
IEEE Std 1450.6-2005
IEEE Standard Test Interface Language (STIL) for Digital Test Vector Data-Core Test Language (CTL)
IEEE Std 1450.2-2002
IEEE Standard for Extensions to Standard Test Interference Language (STIL) (IEEE Std 1450?-1999) for DC Level Specifications
IEEE Std 1450.1-2005
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Semiconductor Design Environments
IEEE Std 1441-2004
IEEE Guide for Inspection of Overhead Transmission Line Construction
IEEE Std 1431-2004
IEEE Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros
IEEE Std 1428-2004
IEEE Guide for Installation Methods for Fiber-Optic Cables in Electric Power Generating Stations and in Industrial Facilities
IEEE Std 142-2007
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (Green Book)
IEEE Std 1413.1-2002
IEEE Guide for Selecting and Using Reliability Prediction Based on IEEE 1413
IEEE Std 1410-2004
IEEE Guide for Improving the Lightning Peformance of Electric Power Overhead Distribution Lines
IEEE Std 1407-2007
IEEE Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks
IEEE Std 1394C-2006
IEEE Standard for a High-Performance Serial Bus-Amendment 3
IEEE Std 1394.3-2003
IEEE Standard for a High Performance Serial Bus Peer-to-Peer Data Transport Protocol (PPDT)
IEEE Std 1394.1-2004
IEEE Standard for High Performance Serial Bus Bridges
IEEE Std 1366-2003
IEEE Guide for Electric Power Distribution Reliability Indices
IEEE Std 1364-2005
IEEE Standard for Verilog Hardware Description Language
IEEE Std 1363a-2004
IEEE Standard Specifications for Public-Key Cryptography - Amendment 1: Additional Techniques
IEEE Std 1361-2003
IEEE Guide for Selection, Charging, Test, and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
IEEE Std 1309-2005
IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz
IEEE Std 1307-2004
IEEE Standard for Fall Protection for Utility Workers
IEEE Std 1285-2005
IEEE Standard for Scalable Storage Interface (S2I)
IEEE Std 1283-2004
IEEE Guide for Determining the Effects of High-Temperature Operation on Conductors, Connectors, and Accessories
IEEE Std 1268-2005
IEEE Guide for the Safe Installation of Mobile Substation Equipment
IEEE Std 125-2007
IEEE Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators
IEEE Std 1247-2005
IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 V.
IEEE Std 1222-2003
IEEE Standard for All-Dielectric Self-Supporting Fiber Optic Cable
IEEE Std 12207-2008
Systems and software engineering - Software life cycle processes
IEEE Std 1216-2000
Guide for the Application of Faulted Circuit Indicators for 200 A, Single-Phase Underground Residential Distribution (URD)
IEEE Std 1210-2004
IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable
IEEE Std 1207-2004
IEEE Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units
IEEE Std 1205-2000(R2007)
IEEE Guide for Assessing, Monitoring and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations
IEEE Std 1202-2006
IEEE Standard for Flame Propagation Testing of Wire & Cable
IEEE Std 1193-2003
Guide for Measurement of Environmental Sensitivities of Standard Frequency Generators
IEEE Std 1189-2007
IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
IEEE Std 1188-2005
IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead- Acid (VRLA) Batteries for Stationary Applications
IEEE Std 1184-2006
IEEE Guide for Batteries for Uninterruptible Power Supply Systems
IEEE Std 1175.3-2004
IEEE Standard for CASE Tool Interconnections - Reference Model for Specifying Software Behavior
IEEE Std 1175.2-2006
IEEE Recommended Practice for CASE Tool Interconnection-Characterization of Interconnections
IEEE Std 1159.3-2003
Recommended Practice for the Transfer of Power Quality Data
IEEE Std 1149.1-2001
IEEE Standard Test Access Port and Boundary-Scan Architecture (Revision of IEEE Std 1149.1-1990 and IEEE Std 1149.1b-1994)
IEEE Std 1147-2005
IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
IEEE Std 1124-2003
IEEE Guide for Analysis and Definition of DC Side Harmonic Performance of HVDC Transmission
IEEE Std 112-2004
IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
IEEE Std 1120-2004
IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems
IEEE Std 1115a-2007
IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications - Amendment 1: Additional Discussion on Sizing Margins
IEEE Std 1110-2002
IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
IEEE Std 1106-2005
IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
IEEE Std 1076c-2007
IEEE Standard VHDL Language Reference Manual Amendment 1: Procedural Language Application Interface
IEEE Std 1076.1-2007
IEEE Standard VHDL Analog and Mixed-Signal Extensions
IEEE Std 1076.1.1-2004
IEEE Standard VHDL Analog and Mixed-Signal Extensions - Packages for Multiple Energy Domain Support
IEEE Std 1074-2006
IEEE Standard for Developing a Software Project Life Cycle Process
IEEE Std 1070-2006
IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components
IEEE Std 1067-2005
IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV ac and ? 750 kV dc
IEEE Std 1050-2004
IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations
IEEE Std 1048-2003
IEEE Guide for Protective Grounding of Power Lines
IEEE Std 1028-2008
IEEE Standard for Software Reviews and Audits
IEEE Std 1023-2004
IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE Std 1019-2004
IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
IEEE Std 1018-2004
IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
IEEE Std 1017-2004
IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
IEEE Std 1015-2006
BLUE BOOK IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems
IEEE Std 1013-2007
IEEE Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems
IEEE Std 1012-2004
IEEE Standard for Software Verification and Validation
IEEE Std 1010-2006
IEEE Guide for Control of Hydroelectric Power Plants
IEEE Std 1003.26-2003
IEEE Standard for Information Technology - Portable Operating System Interface (POSIX) - Part 26: Device Control Application Program Interface (API) [C Language]
IEEE Std 1003.13-2003
IEEE Standard for Information Technology - Standardized Application Environment Profile (AEP) - POSIX Realtime and Embedded Application Support
IEEE Std 1003.1-2001/Cor 2-2004
IEEE Standard for Information Technology-Portable Operating System Interface (POSIX)-Technical Corrigendum 2
IEEE P802.16-2004 COR (D5)
Draft IEEE Standard for Local and metropolitan area networks Corrigendum
IEEE N42.44-2008
Performance of checkpoint cabinet X-ray imaging security systems
IEEE N42.41-2007
Performance Criteria for Active Interrogation Systems
IEEE C95.1-2005
IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields,3 kHz to 300 GHz
IEEE C63.9-2008
RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts
IEEE C63.011-2000
Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment
IEEE C62.92.5-2009
IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems
IEEE C62.92.1-2000
Guide for the Application of Neutral Grounding in Electric Utility Systems - Part 1 - Introduction
IEEE C62.37.1-2000
Guide for the Application of Thyristor Surge Protective Devices
IEEE C62.36-2000
IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications and Signaling Circuits"
IEEE C62.21-2003/Cor 1-2008
IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater - Corrigendum 1: Replace Table 2, A.1, and A.2
IEEE C57.93-2007
IEEE Guide for Liquid-Immersed Power Transformers
IEEE C57.18.10a-2008
IEEE Standard Amd1: Technical & Editorial
IEEE C57.147-2008
IEEE Guide Acceptance & Maintenance of Natural Ester Fluids
IEEE C57.140-2006
Evaluation Reconditioning Liquid Immersed Power Transformers
IEEE C57.136-2000
Guide for Sound Level Abatement & Determination for Liquid-Immersed Power Transformers & Shunt Reactors Rated Over 500 kVA
IEEE C57.13.5-2003
Trial-Use Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
IEEE C57.13.3-2005
IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
IEEE C57.120-1991 (R2000)
IEEE Loss Evaluation Guide for Power Transformers and Reactors
IEEE C57.12.91-2001
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE C57.12.59-2001
Standard for Dry-Type Transformer Through-Fault Current Duration
IEEE C57.12.28-2005
IEEE Standard for Pad-Mounted Equipment-Enclosure Integrity
IEEE C57.12.01-2005
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin Encapsulated Windings
IEEE C57.119-2001
Recommended Practice for Performing Temperature Rise Tests on Oil Immersed Power Transformers at Loads Beyond Nameplate Ratings
IEEE C37.96-2000
Guide for AC Motor Protection
IEEE C37.90.3-2001
IEEE Standard Electrostatic Discharge Tests for Protective Relays
IEEE C37.90.1-2002
IEEE Standard for Surge Withstand Capabilities (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE C37.74-2003
Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
IEEE C37.71-2001
Standard for the Three-Phase, Manually Operated Subsurface and Vault Load-Interrupting Switches for Alternating-Current Systems (Revision of IEEE Std C37.71-1984)
IEEE C37.60-2003
Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems up to 38 kV
IEEE C37.45-2007
IEEE Standard Specifications High-Voltage Distribution Class
IEEE C37.43-2008
IEEE Specifications for High-Voltage Expulsion
IEEE C37.41-2008
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air, Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
IEEE C37.301-2009
IEEE standard for high-voltage switchgear (above 1000 V) test techniques - Partial discharge measurements
IEEE C37.235-2007
IEEE Guide for the Application of Rogowski Coils
IEEE C37.20.6-2007
IEEE Standard 4.76kV to 38kV Rated Ground & Test Devices
IEEE C37.20.1b-2006
Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 2
IEEE C37.16-2009
IEEE standard for preferred ratings, related requirements, and application recommendations for low-voltage AC (635 V and below) and DC (3200 V and below) power circuit breakers
IEEE C37.1-2007
IEEE Standard for SCADA & Automation Systems
IEEE C37.117-2007
IEEE Guide for the Application of Protective Relays
IEEE C37.109-2006
Protection Shunt Reactors
IEEE C37.103-2004
IEEE Guide for Differential and Polarizing Relay Circuit Testing
IEEE C37.10.1-2000
IEEE Guide for the Selection of Monitoring for Circuit Breakers
IEEE C37.09-1999/COR 1-2007
Test Procedure for AC High-Voltage Circuit Breakers
IEEE C37.016-2006
IEEE Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV
IEEE 987-2001
IEEE Guide for Application of Composite Insulators
IEEE 98-2002
IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
IEEE 982.1-2005
IEEE Standard Dictionary of Measures of the Software Aspects of Dependability
IEEE 95-2002
IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage
IEEE 90003-2008
IEEE guide - Adoption of ISO/IEC 90003:2004 - Software engineering - Guidelines for the application of ISO 9001:2000 to computer software
IEEE 844-2000
IEEE Recommended Practice for Electrical Impedancem Induction, and Skin Effect Heating of Pipelines and Vessels
IEEE 833-2005
IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
IEEE 829-2008
IEEE Standard for Software & System Test Documentation
IEEE 802-2001
Standard for Local and Metropolitan Area Networks: Overview and Architecture
IEEE 802.3as-2006
Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications
IEEE 802.3an-2006
IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 3,Amendment 1: Physical Layer and Management Parameters for 10 Gb/s Operation, Type 10G
IEEE 802.3-2005
IEEE Standard for Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks--Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Phy
IEEE 802.21-2008
IEEE Standard for Local and metropolitan area networks - Part 21: Media Independent Handover Services
IEEE 802.1t-2001
IEEE Standard for Information technology - Telecomminications and information exchange between systems - Loacal and metropolitan area networks - Common specifications Part 3: Media Access Control (MAC) Bridges - Amendment 1
IEEE 802.1Q-2005/Cor1-2008
IEEE Standard for local and metropolitan area networks virtual bridged local area networks -Corrigendum 1: Corrections to the multiple register protocol
IEEE 802.1Q-2005
IEEE Standard for Local and Metropolitan Area Networks-- Virtual Bridged Local Area Networks (Incorporates IEEE Std 802.1Q-1998, IEEE Std 802.1uT-2001, IEEE Std 802.1vT-2001, and IEEE 802.1sT-2002)
IEEE 802.1AX-2008
IEEE Standard for Local and Metropolitan Area Networks - Link Aggregation
IEEE 802.1ah-2008
IEEE Standard for Local and metropolitan area networks - Virtual Bridged Local Area Networks -Amendment 7: Provider Backbone Bridges
IEEE 802.16k-2007
Standard for Information Technology Std Media Access Control (MAC) Bridges Amd 2
IEEE 802.16g-2007
Amendment 3: Management Plane Procedures & Services
IEEE 802.16/Conformance01-2003
Standard for Conformance to IEEE Standard 802.16 - Part 1: Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC Air Interface
IEEE 802.15.5-2009
IEEE Recommended Practice for Information technology -Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPAN
IEEE 802.15.3b-2005
IEEE Standard for Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specification
IEEE 802.15.3-2003
IEEE Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for
IEEE 802.15.2-2003
Recommended Practice for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.2: Coexistence of Wireless Personal Area Networks with Other Wireless De
IEEE 802.1-2005 Amd1 (2006)
IEEE Standards for Local and Metropolitan Area Networks --Virtual Bridged Local Area Networks-- Revision--Amendment 4: Provider Bridges)
IEEE 802.11y-2008
IEEE Standard for Information Technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specificatio
IEEE 802.11-2007
Standard for Information Technology - Part 11: Wireless LAN MAn & PHY Spec
IEEE 693-2005
IEEE Recommended Practices for Seismic Design of Substations
IEEE 67-2005
IEEE Guide for the Operation and Maintenance of Turbine-Generators
IEEE 62531-2007
Standard for Property Specification Language
IEEE 625-2001
Recommended Practices to Improve Electrical Maintenance and Safety in the Cement Industry
IEEE 592-2007
IEEE Standard for Exposed Semiconducting Shields
IEEE 576-2000
Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications
IEEE 551-2006
Calculating Short- Circuit Currents in Industrial and Commercial Power Systems
IEEE 535-2006
Class 1E Lead Storage Batteries Nuclear Power Generating Stations
IEEE 515.1-2005
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications
IEEE 4a-2001
Amendment to IEEE Standard Techniques for High-Voltage Testing
IEEE 495-2007
IEEE Guide for Testing Faulted Circuit Indicators
IEEE 487-2007
Recommended Practice for the Protection of Wire-Line
IEEE 475-2000
Radiation-Field-Disturbance Sensors, Measurement Procedure for
IEEE 421.5-2005
IEEE Recommended Practice for Excitation Systems for Power Stability Studies
IEEE 421.1-2007
Standard Definitions for Excitation Systems for Synchronous Machines
IEEE 420-2001
Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations
IEEE 400-2001
Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems
IEEE 400.1-2007
IEEE Guide for Field Testing of Laminated Dielectric Shielded
IEEE 384-2008
IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits
IEEE 356-2001
IEEE Guide for Measurements of Electromagnetic Properties of Earth Media
IEEE 338-2006
Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
IEEE 308-2001
Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 287-2007
IEEE Standard for Precision Coaxial Connectors (DC to 110 GHz)
IEEE 286-2000
Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE 277-2007
Recommended Practice for Cement Plant Power Distribution
IEEE 2600.1-2009
IEEE Standard for a Protection Profile in Operational Environment A
IEEE 242-2001
Recommended Practice for Protection and Coord. of Industrial and Commercial Power Systems - IEEE Buff BookT
IEEE 2003.2-1996
Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities
IEEE 2003.1b-2000
Standard for Information Technology - Test Methods Specifications for Measuring Conformance to POSIX - Part 1: System Application Program Interface (API) - Amendment 1: Realtime Extension [C Language] (supplement to ANSI/IEEE 2003.1-1993)
IEEE 187-2003
IEEE Standard Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz
IEEE 181-2003
Standard on Transitions, Pulses, and Related Waveforms
IEEE 1802.3-2001
Conformance Test Methodology for IEEE Standard for Local and Metropolitan Area Networks-Specific Requirements-Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications
IEEE 1725-2006
IEEE Standard for Rechargeable Batteries for Cellular Telephones
IEEE 1675-2008
IEEE standard for broadband over power line hardware
IEEE 1672-2006
Ultrawideband Radar Definitions
IEEE 1671.6-2008
IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML: Exchanging Test Station Information
IEEE 1671.4-2007
IEEE Trial-Use Standard: Exchanging Test Configuration
IEEE 1671.3-2007
IEEE Trial-Use Standard: Exchanging UUT
IEEE 1671.2-2008
IEEE trial-use standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML: exchanging instrument descriptions
IEEE 1662-2008
IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
IEEE 1660-2008
IEEE guide for application and management of stationary batteries used in cycling service
IEEE 1654-2009
IEEE Guide for RF Protection of Personnel Working in the Vicinity of Wireless Communications Antennas Attached to Electric Power Line Structures
IEEE 1647-2008
IEEE Standard for the Functional Verification Language e
IEEE 1641.1-2006
Use IEEE Std 1641 Standard Signal Test Definition
IEEE 1636.1-2007
IEEE Trial-Use Standard for Software Interface for Maintenance Information
IEEE 1625-2008
IEEE Standard for Rechargeable Batteries for Multi-Cell Mobile Computing Devices
IEEE 1624-2008
IEEE Standard for organizational reliability capability
IEEE 1620-2008
IEEE Standard for Test Methods for the Characterization of Organic Transistors and Materials
IEEE 1620.1-2006
IEEE Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators
IEEE 1619.1-2007
IEEE Standard for Authenticated Encryption with Length Expansion for Storage Devices
IEEE 1613-2003
Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations
IEEE 1610-2007
IEEE Guide Application of Faulted Circuit Indicators 200 / 600 A
IEEE 1597.1-2008
IEEE standard for validation of computational electromagnetics computer modeling and simulations
IEEE 1580-2001
Recommended Practice for Marine Cable for use on Shipboard and Fixed or Floating Marine Platforms
IEEE 1578-2007
IEEE Recommended Practice Stationary Battery Electrolyte Spill
IEEE 1561-2007
Performance & Life of Lead-Acid Batteries in Remote Hybrid
IEEE 1547.3-2007
IEEE Guide for Monitoring, Information Exchange & Control
IEEE 1546-2000
Guide for Digital Test Interchange Format (DTIF) Application
IEEE 1542-2007
Guide Installation, Maintenance & Operation Irrigation Equipment
IEEE 1538-2000
IEEE Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Transformers
IEEE 1516.4-2007
IEEE Recommended Practice for Verification, Validation
IEEE 1515-2000
Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods
IEEE 1512.1-2006
Common Traffic Incident Management Message Sets
IEEE 1512.1-2003 (R2006)
IEEE Standard for Common Traffic Incident Management Message Sets for Use by Emergency Management Centers
IEEE 1505.1-2008
IEEE trial-use standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505
IEEE 1502-2007
IEEE Recommended Practice Radar Cross-Section Test Procedures
IEEE 1497-2001
Standard for Standard Delay Format (SDF) for the Electronic Design Process
IEEE 1484.11.3-2005
IEEE Standard for Learning Technology- Extensible Markup Language (XML) Schema Definition Language Binding for Data Model for Content Object Communication
IEEE 1478-2001
IEEE Standard for Environmental Conditions for Transit Rail Car Electronic Equipment
IEEE 1476-2000
Standard for Passenger Train Auxiliary Power Systems Interfaces
IEEE 1471-2000
IEEE Recommended Practice for Architectural Description of Software-Intensive Systems
IEEE 1459-2000
"IEEE Trial-Use Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions "
IEEE 1451.5-2007
Standard for Smart Transducer Interface Sensors & Formats
IEEE 1451.0-2007
Common Functions, Communication Protocols and TEDS format
IEEE 1450.3-2007
IEEE Standard for Extensions Standard Test Interface Language
IEEE 1434-2000
IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery
IEEE 1427-2006
Electrical Clearances Insulation Levels Air Insulated Electrical Power Substations
IEEE 1425-2001
IEEE Guide for the Evaluation of the Remaining Life of Impregnated Paper
IEEE 1415-2006
Induction Machinery Maintenance Testing Failure Analysis
IEEE 1394-2008
IEEE Standard for a High-Performance Serial Bus
IEEE 1368-2006
Aeolian Vibration Field Measurements Overhead Conductors
IEEE 1363-2000
Standard Specifications for Public Key Cryptography
IEEE 1302-2008
IEEE guide for the electromagnetic characterization of conductive gaskets in the frequency range of DC to 18 GHz
IEEE 1284-2000
IEEE Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal Computers
IEEE 1284.4-2000
IEEE Standard for Data Delivery and Logical Channels for IEEE 1284 interfaces
IEEE 1284.3-2000
IEEE Standard for Interface and Protocol Extensions to IEEE 1284-Compliant Peripherals and Host Adapters
IEEE 1255-2000
IEEE Guide for Evaluation for Torque Pulsations During Starting of Synchronous Motors
IEEE 1244.5-2000
IEEE Standard for Media Management System (MMS) Library Management Protocol (LMP)
IEEE 1244.4-2000
IEEE Standard for Media Management System (MMS) Drive Management Protocol (DMP)
IEEE 1244.3-2000
IEEE Standard for Media Management System (MMS) Media Management Protocol (MMP)
IEEE 1244.2-2000
"IEEE Standard for Media Management System (MMS) Session Security, Authentication & Initilization Protocol (SSAIP)"
IEEE 1244.1-2000
IEEE Standard for Media Management System (MMS) Architecture
IEEE 1242-1999
IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
IEEE 1240-2000
Guide for the Evaluation of the Reliability of HVDC Converter Stations
IEEE 1235-2000
IEEE Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
IEEE 1234-2007
IEEE Guide for Fault-Locating Techniques on Shielded
IEEE 1217-2001
IEEE Guide for Preservation Treatment of Wood Distribution and Transmission Line Structures
IEEE 1215-2001
Guide for the Application of Separable Insulated Conductors
IEEE 1205-2000 Cor 1-2006
IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations -- Corrigendum 1: Thermal Aging Model Corrections
IEEE 1187-2002
IEEE Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications
IEEE 1180-1990 (R1997)
IEEE standard Specifications for the Implementation of 8X8 Inverse Discrete Cosine Transformers
IEEE 1174-2000
IEEE Standard Serial Interface for Progammable Instrumentation
IEEE 114-2001
IEEE Standard Test Procedures for Single-Phase Induction Motors
IEEE 1139-2008
IEEE standard for broadband over power line hardware
IEEE 1115-2000
Sizing Nickel-Cadmium Batteries for Stationary Batteries
IEEE 111-2000
Standard for Wide Band (Greater than 1 Decade) Transformers
IEEE 11073-20601-2008
Health informatics - Personal health device communication - Part 20601: Application profile - Optimized Exchange Protocol
IEEE 11073-10471-2008
Health informatics - Personal health device communication - Part 10471: Device specialization -Independent living activity hub
IEEE 11073-10442-2008
Health informatics - Personal health device communication - Part 10442: Device specialization -Strength fitness equipment
IEEE 11073-10441-2008
Health informatics - Personal health device communication - Part 10441: Device specialization -Cardiovascular fitness and activity monitor
IEEE 11073-10417-2009
Health informatics - Personal health device communication - Part 10417: device specialization- glucose meter
IEEE 11073-10415-2008
Health informatics - Personal health device communication - Part 10415: Device specialization -Weighing scale
IEEE 11073-10408-2008
Health informatics - Personal health device communication - Part 10408: Device specialization -Thermometer
IEEE 11073-00101-2008
Health informatics - PoC medical device communication - Part 00101: Guide - Guidelines for the use of RF wireless technology
IEEE 1100-2005
IEEE Recommended Practice for Powering and Grounding Electronic Equipment. (IEEE Emerald Book)
IEEE 1076-2002
IEEE Standard VHDL Language Reference Manual
IEEE 1076.4-2000
Standard for VITAL Application Specific Integrated Circuit (ASIC) Specification
IEEE 1063-2001
Standard for Software User Documentation
IEEE 1057-2007
IEEE Standard for Digitizing Waveform Recorders
IEEE 1003.1-2008
Standard for Information Technology - Portable Operating System Interface (POSIX) Base Specifications, Issue 7
IEC/IEEE 62271-111-2005
High Voltage Switchgear & Controlgear - Part 111 (IEC 62271-111-2005/IEEE C37.60)
C95.2-1999
Standard for Radio Frequency Energy and Current Flow Symbols
C95.2-1982
American National Standard Radio Frequency Radiation Hazard Warning Symbol
C63.6-1996
American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
C63.2-1996
American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications
C63.18-1997
Recommended Practice for an On-site, Ad-Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specific Radio Frequency Transmitters
C63.16-1993
American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment
C63.14-1998
American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP) and Electrostatic Discharge (ESD) (Dictionary of EMC/EMP/ESD Terms and Definitions)
C63.13-1991
American National Standard Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use
C63.12-1999
Electromagnetic Compatibility Limits - Recommended Practice
C63.022-1996
American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
C62.92.4-1991
IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV-Distribution
C62.92.3-1993
IEEE Guide for the Application of Neutral Grounding in Electrical Utlitity Systems, Part III-Generator Auxiliary Systems
C62.92.2-1989
IEEE Guide for the Application Guide for Neutral Grounding in Electrical Utility Systems, Pt II - Grounding of Synchronous Generator Systems
C62.64-1997
IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
C62.62-2000
IEEE Standard Test Specifications for Surge-Protective Devices for Low Voltage AC Power Circuits
C62.47-1992
IEEE Guide on Electrostatic Discharge: Characterization of the ESD Environment
C62.41-1991
IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits
C62.37-1996
IEEE Standard Test Specification for Thyristor Diode Surge Protective Devices
C62.35-1987
IEEE Standard Test Specifications for Avalanche Junction Semiconductor Surge Protective Devices
C62.34-1996
IEEE Standard for Performance of Low-Voltage Surge-Protective Devices (Secondary Arresters)
C62.33-1982
IEEE Standard Test Specifications for Varistor Surge-Protective Devices
C62.23-1995
IEEE Application Guide for Surge Protection of Electric Generating Plants
C62.22-1997
IEEE Guide for Application of Metal-Oxide Surge Arresters for Alternating-Current Systems
C62.22.1-1996
IEEE Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
C62.2-1987
IEEE Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems
C62.1-1989
IEEE Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits
C57.98-1993
IEEE Guide for Transformer Impulse Tests
C57.96-1999
Distribution and Power Transformers, Guide for Loading Dry-Type (appendix to ANSI C57.12 standards)
C57.94-1982
IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
C57.93-1995
IEEE Guide for Installation of Liquid-Immersed Power Transformers
C57.91-1995
IEEE Guide for Loading Mineral-Oil-Immersed Transformers
C57.19.100-1995
IEEE Guide for Application of Power Apparatus Bushings
C57.19.03-1996
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications
C57.19.01-2000
Outdoor Apparatus Bushings, Performance Characteristics and Dimensions for
C57.19.00-1991
IEEE Standard General Requirements and Test Procedure for Outdoor Power Apparatus Bushings
C57.16-1996
IEEE Standard Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
C57.15-1999
Regulators, Requirements, Terminology, and Test Code for Step-Voltage and Induction-Voltage
C57.138-1998
IEEE Recommended Practice for Routine Impulse Test for Distribution Transformers
C57.134-2000
Guide for Determination of Hottest Spot Temperature in Dry Type Transformers
C57.131-1995
IEEE Standard Requirements for Load Tap Changers
C57.13.3-1983
IEEE Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases
C57.125-1991
IEEE Guide for Failure Investigation, Documentation, and Analysis for Power Transformers and Shunt Reactors
C57.124-1991
IEEE Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry Type Transformers
C57.121-1998
IEEE Guide for Acceptance and Maintenance of Less-Flammable Hydrocarbon Fluid in Transformers
C57.12.60-1998
IEEE Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid Cast and Resin-Encapsulated Power and Distribution Transformers
C57.12.58-1991
IEEE Guide for Conducting a Transient Voltage Analysis of a Dry Type Transformer Coil
C57.12.56-1986
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers
C57.12.55-1987 (R1998)
Dry-Type Transformers in Unit Installations, Including Unit Substations - Conformance Standard
C57.12.52-1981 (R1998)
Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Sealed
C57.12.51-1981 (R1998)
Dry-Type Power Transformers 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Ventilated
C57.12.50-1981 (R1998)
Distribution Transformers 1 to 500 kVA, Single-Phase; and 15 to 500 kVA, Three-Phase with High-Voltage 601-34 500 Volts, Low Voltage 120-600 Volt, Ventilated Dry-Type
C57.12.26-1992
IEEE Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors (34 500 GrdY/19 920 Volts and Below, 2500 kVA and Smaller)
C57.12.25-1990
Pad-Mounted Compartmental-Type Self-Cooled Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors, High-Voltage, 34 500 Grd Y/19 920 Volts and Below; Low-Voltage, 240/120; 167 kVA and Smaller, Requirements for
C57.12.10-1988
Transformers 230 kV and Below, 833/958 through 8333/10 417 kVA Single Phase, and 750/862 through 60 000/80 000/100 000 kVA Three Phase, Requirements for
C57.117-1986
IEEE Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems
C57.116-1989
IEEE Guide for Transformers Directly Connected to Generators
C57.113-1991
IEEE Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
C57.111-1989
IEEE Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
C57.110-2008
IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
C57.109-1993
IEEE Guide for Transformers Through-Fault-Current Duration
C57.105-1978
IEEE Guide for Application of Transformer Connections in Three-Phase Distribution Systems
C57.104-1991
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
C57.100-1999
Distribution Transformers, Test Procedure for Thermal Evaluation of Oil-Immersed
C37.99-1990
IEEE Guide for the Protection of Shunt Capacitor Banks
C37.98-1987
IEEE Standard Seismic Testing of Relays
C37.85-1989 (R1995)
Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum
C37.82-1987
IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
C37.81-1989
IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
C37.73-1998
Standard Requirements for Pad-Mounted Fused Switchgear
C37.61-1973
IEEE Standard Guide for the Application, Operation, and Maintenance of Automatic Circuit Reclosers
C37.58-1990 (R1996)
Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear
C37.57-1990 (R1996)
Switchgear - Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing
C37.55-1989 (R1996)
Switchgear - Metal-Clad Switchgear Assemblies - Conformance Test Procedures
C37.54-1996
Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies
C37.52-1974 (R2000)
Low-Voltage AC Power Circuit Protectors Used in Enclosures, Test Procedures for
C37.51-1989 (R1995)
Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures
C37.50-1989 (R2000)
Switchgear - Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures
C37.45-1981 (R1992)
Distribution Enclosed Single-Pole Air Switches, Specifications for
C37.44-1981 (R1992)
Distribution Oil Cutouts and Fuse Links, Specifications for
C37.42-1996
Switchgear - Distribution Cutouts and Fuse Links - Specifications
C37.37-1996
IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V)
C37.36b-1990
IEEE Guide to Current Interruption With Horn-Gap Air Switches
C37.35-1995
IEEE Guide for the Application, Installation, Operation, and Maintenance of High-Voltage Air Disconnecting and Interrupter Switches
C37.34-1994
IEEE Standard Test Code for High-Voltage Air Switches
C37.30-1997
IEEE Standard Requirements for High Voltage Switches
C37.29-1981
IEEE Standard for Low-Voltage AC Power Circuit Protectors Used in Enclosures
C37.27-1987
IEEE Standard Application Guide for Low-Voltage AC NonIntegrally Fused Power Circuit Breakers (Using Separately Mounted Current-Limiting Fuses)
C37.26-1972
IEEE Standard Guide for Methods of Power-Factor Measurement for Low-Voltage Inductive Test Circuits
C37.22-1997
Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear
C37.2-2008
Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
C37.20.6-1997
IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures
C37.20.2-1999
Metal-Clad and Station-Type Cubicle Switchgear
C37.20.1-1993
IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
C37.18-1979
IEEE Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery
C37.17-1997
Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers
C37.13-1990
IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
C37.123-1996
IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
C37.122-1993
IEEE Standard for Gas-Insulated Substations
C37.121-1989 (R2000)
Switchgear - Unit Substations - Requirements
C37.1-1994
IEEE Standard Definition, Specification and Analysis of Systems Used for Superivsory Control, Data Acquisition, and Automatic Control
C37.113-1999
Guide for Protective Relay Application to Transmission Lines
C37.112-1996
IEEE Standard Inverse-Time Characteristic Equations for Overcurrent Relays
C37.11-1997
IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
C37.111-1999
Common Format for Transient Data Exchange (COMTRADE) for Power Systems
C37.110-1996
IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes
C37.109-1988
IEEE Guide for the Protection of Shunt Reactors
C37.105-1987
IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
C37.10-1995
IEEE Guide for Diagnostics and Failure Investigation of Power Circuit Breakers
C37.100-1992
IEEE Standard Definitions for Power Switchgear
C37.09-1999
Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (includes supplements ANSI/IEEE C37.09c-1983, ANSI/IEEE C37.09e-1983 and ANSI/IEEE C37.09g-1991)
C37.083-1999
Guide for Synthetic Capacitive Switching Tests of AC High-Voltage Circuit Breakers
C37.082-1982
IEEE Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers
C37.081a-1997
Supplement to IEEE Guide for Synthetic Fault Testing of AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
C37.081-1981
IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
C37.015-1993
IEEE Application Guide for Shunt Reactor Switching
C37.013-1997
Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current
C37.011-1994
IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
C37.010-1999
Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (includes supplements ANSI/IEEE C37.010b and C37.010d)
C136.6-1997
American National Standard for Roadway Lighting EquipmentMetal Heads and Reflector AssembliesMechanical and Optical Interchangeability
C136.5-1996
American National Standard for Roadway Lighting Equipment - Film Cutouts (Reaffirmation of C136.5-1969)
C136.4-1995
American National Standard for Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles
C136.32-1999
Roadway Lighting Equipment - Enclosed Setback Luminaires and Directional Floodlights for High-intensity-Discharge Lamps
C136.3-1995
American National Standard for Roadway Lighting Equipment - Luminaire Attachments (Revision of ANSI C136.3-1989)
C136.27-1996
American National Standard for Roadway Lighting EquipmentA-Tunnel Lighting Luminaires
C136.23-1997
American National Standard for Roadway LightingA-Enclosed Architectural Luminaires
C136.2-1996
American National Standard for Roadway Lighting Equipment - Luminaires Voltage Classification
C136.19-1997
American National Standard for Roadway Lighting Equipment - High-Pressure Sodium Lamps - Guide for Selection
C136.18-1999
ANSI Standard for Roadway Lighting - High-Mast Side-Mounted Luminaires for Horizontal-or Vertical-Burning High-Intensity Discharge Lamps
C136.17-1997
American National Standard for Roadway Lighting EquipmentEnclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge LampsMechanical Interchangeability of Refractors
C136.15-1997
American National Standard for Roadway Lighting EquipmentHigh-Intensity-Discharge and Low-Pressure-Sodium Lamps in LuminairesField Identification
C136.13-1992
American National Standard for Roadway Lighting - Metal Brackets for Wood Poles
C136.12-1996
American National Standard for Roadway Lighting EquipmentMercury LampsGuide for Selection
C136.11-1995
American National Standard for Roadway Lighting Equipment - Multiple Sockets
C136.10-1996
American National Standard for Roadway Lighting EquipmentLocking-Type Photocontrol Devices and Mating Receptacle Physical and Electrical Interchangeability and Testing
C135.63-1998
IEEE Standard for Shoulder Live Line Extension Links for Overhead Line Construction
C135.61-1997
IEEE Standard for Testing of Overhead Transmission and Distribution Line Hardware
C135.2-1999
Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction
C135.20-1998
IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction
C135.1-1999
Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
ANSI N42.6-1980 (R1991)
Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Meter Chargers (includes ANSI N42.5-1965)
ANSI N42.5-1965 (R1977)
American National Standard for Bases for GM Counter Tubes
ANSI N42.42-2006
American National Standard Data Format Standard for Radiation Detectors Used for Homeland Security
ANSI N42.38-2006
American National Standard Performance Criteria for Spectroscopy-Based Portal Monitors Used for Homeland Security
ANSI N42.37-2006
American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
ANSI N42.35-2006
American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
ANSI N42.34-2006
American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
ANSI N42.34-2003
Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
ANSI N42.33-2006
American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
ANSI N42.32-2006
Criteria for Alarming Personal Radiation Detectors for Homeland Security
ANSI N42.31-2003
Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation
ANSI N42.30-2002
Performance Specification for Tritum Monitors
ANSI N42.28-2002
American National Standard for Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements
ANSI N42.27-1999
Determination of Uniformity of Solid Gamma-Emitting Flood Sources
ANSI N42.25-1997
American National Standard Calibration and Usage of Alpha/Beta Proportional Counters
ANSI N42.23-1996
American National Standard Measurement and Associated Instrumentation Quality Assurance for Radioassay Laboratories
ANSI N42.22-1995
American National Standard Traceability of Radioactive Sources to NIST and Associated Instrument Quality Control
ANSI N42.20-2003
Performance Criteria for Active Personnel Radiation Monitors
ANSI N42.18-2004
Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
ANSI N42.17c-1989
Performance Specifications for Health Physics InstrumentationPortable Instrumentation for Use in Extreme Environmental Conditions, American National Standard
ANSI N42.17b-1989
Performance Specifications for Health Physics Instrumentation - Occupational Airborne Radioactivity Monitoring Instrumentation, American National Standard
ANSI N42.17A:2003
American National Standard for Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental Conditions
ANSI N42.15-1997
American National Standard Check Sources for and Verification of Liquid-Scintillation Counting Systems
ANSI N42.14-1999
Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides
ANSI N42.13-2004
Calibration and Usage of "Dose Calibrator" IonizationChambers for the Assay of Radionuclides
ANSI N42.12-1994
American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides
ANSI N323D-2002
American National Standard for Installed Radiation Protection Instrumentation
ANSI N323B-2003
Installed Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments for Near Background Operation
ANSI C63.7-2005
American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements
ANSI C63.5-2006
American National Standard for Calibration of Antennas Used for Radiated Emission Measurements in Electro Magnetic Interference
ANSI C63.4-2003
Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
ANSI C63.22-2004
American National Standard Guide for Automated Electromagnetic Interference Measurements
ANSI C37.32-2002
High-Voltage Switches, Bus Supports, and Accessories-Schedules of Preferred Ratings, Construction Guidelines and Specifications
ANSI C37.06.1-2000
Trial-Use Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated "Definite Purpose for Fast Transient Recovery Voltage Rise Times" (NOT AN AMERICAN NATIONAL STANDARD)
ANSI C136.31-2001
American National Standard for Roadway Lighting Equipment-Luminaire Vibration
ANSI/IEEE C95.6-2002
Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0 to 3 kHz
ANSI/IEEE C95.4-2002
Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations
ANSI/IEEE C95.3-2002
Recommended Practice for Measurements and Computations with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 100 kHz to 300 GHz
ANSI/IEEE C57.123-2002
Guide for Transformer Loss Measurement
ANSI/IEEE C57.12.80-2002
Terminology for Power and Distribution Transformers
ANSI/IEEE C57.12.23-2002
Standard for Underground Type, Self-Cooled, Single-Phase, Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage 25000 V and Below; Low Voltage 600 V and Below; 167 kVA and Smaller
ANSI/IEEE C37.20.1-2002
Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
ANSI/IEEE C37.104-2002
Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines
ANSI/IEEE C37.04a-2003
Standard Capacitance Current Switching Requirements for High Voltage Circuit Breakers
ANSI/IEEE 802.1s-2002
Standards for Local and Metropolitan Area Networks - Amendment to 802.1Q Virtual Bridged Local Area Networks: Multiple Spanning Trees
ANSI/IEEE 802.11F-2003
Trial-Use Recommended Practice for Multi-Vendor Access Point Interoperability Via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11 Operation (Draft Standard for Trial Use)
ANSI/IEEE 730-2002
Software Quality Assurance Plans
ANSI/IEEE 521-2002
Letter Designations for Radar-Frequency Bands
ANSI/IEEE 516-2003
Guide for Maintenance Methods on Energized Power Lines
ANSI/IEEE 497-2002
Standard Criteria for Accident Monitoring Instrumentation for Nuclear Generating Stations
ANSI/IEEE 484-2002
Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
ANSI/IEEE 45-2002
Recommended Practice for Electrical Installations on Shipboard
ANSI/IEEE 269-2002
Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
ANSI/IEEE 18-2002
Shunt Power Capacitors
ANSI/IEEE 1585-2002
Guide for the Functional Specification of Medium Voltage (1 - 35 kV) Electronic Series Devices for Compensation of Voltage Fluctuations
ANSI/IEEE 1584-2002
Guide for Performing Arc Flash Hazard Calculations
ANSI/IEEE 1570-2002
Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail Intersection
ANSI/IEEE 1547-2003
Standard for Interconnecting Distributed Resources with Electric Power Systems
ANSI/IEEE 1534-2002
Recommended Practice for Specifying Thyristor Controlled Series Capacitors
ANSI/IEEE 1532-2002
Standard for In-System Configuration of Programmable Devices
ANSI/IEEE 1516.3-2003
Recommended Practice for High Level Architecture (HLA) Federation Development and Execution Process (FEDEP)
ANSI/IEEE 1512.1-2003
Standard for Traffic Incident Management Message Sets For Use By Emergency Management Centers
ANSI/IEEE 1484.12.1-2002
Standard for Learning Object Metadata
ANSI/IEEE 1394b-2002
High Performance Serial Bus (High Speed Supplement)
ANSI/IEEE 1246-2002
Guide for Temporary Protective Grounding Systems Used in Substations
ANSI/IEEE 1212-2001
Control and Status Registers (CSR) Architecture for Microcomputer Buses
ANSI/IEEE 1175.1-2002
Guide for CASE Tool Interconnections - Classification and Description
ANSI/IEEE 1149.6-2003
Standard for Boundary-Scan Testing of Advanced Digital Networks
998-1996
IEEE Guide for Direct Lightning Stroke Shielding of Substations
9945-2-1993
ISO/IEC 9945-2:1993: Information technologyPortable Operating System Interface (POSIXA(r)) Part 2: Shell and Utilities
993-1997
IEEE Standard for Test Equipment Description Language (TEDL)
991-1986
IEEE Standard for Logic Circuit Diagrams
980-1994
IEEE Guide for Containment and Control of Oil Spills in Substations
979-1994
IEEE Guide for Substation Fire Protection
978-1984
IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line Tools
977-1991
IEEE Guide to Installation of Foundations for Transmission Line Structures
952-1997
IEEE Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
951-1996
IEEE Guide to the Assembly and Erection of Metal Transmission Structures
945-1984
IEEE Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and Technology
944-1986
IEEE Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating Stations
935-1989
IEEE Guide on Terminology for Tools & Equipment to be Used in Live Line Working
933-1999
Guide for the Definition of Reliability Program Plans for Nuclear Power Generating Stations
929-2000
Recommended Practice for Utility Interface of Residential and Intermediate Photovoltaic (PV) Systems
91-1984
IEEE Standard Graphic Symbols for Logic Functions
902-1998
IEEE Guide for Maintenance, Operation and Safety of Industrial and Commercial Power Systems (Yellow Book)
896.10-1997
Standard for Futurebus+A(r) Spaceborne SystemsProfile S
8802-6-1994
ISO/IEC 8802-6:1994: Information technology- Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 6: Distributed Queue Dual Bus (DQDB) access method and physical layer specificat
8802-5-1998Amd1
ISO/IEC 8802-5:1998, Amd.1 (ANSI/IEEE Std 802.5 and 802.5j, 1998 Edition) Information Technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements-Part 5: Token ring access method and physical layer specification-Amendment 1: Dedicated token ring operation and fiber optic media
8802-5-1998
Information TechnologyTelecommunications and information exchange between systemsLocal and metropolitan area networksSpecific requirementsPart 5: Token ring access method and physical layer specifications
8802-4-1990
ISO/IEC 8802-4:1990: Information processing systems - Local area networks - Part 4:Token-passing bus access method and physical layer specifications
8802-2-1998
Logical link control (with Amendments 3, 6, and 7)
8802-12-1998
Part 12: Demand-priority access method, physical layer and repeater specifications, ISO/IEC 8802-12: 1998, Information technologyTelecommunications and information exchange between systemsLocal and metropolitan area networks Specific requirements
8802-11: 2005
ISO/IEC 8802-11:2005 (E), Information technology--Telecommunications and information exchange between systems -- Local and metropolitan area networks - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specif
857-1996
IEEE Recommended Practice for Test Procedures for High-Voltage Direct-Current Thyristor Valves
854-1987
IEEE Standard for Radix-Independent Floating-Point Arithmetic
848-1996
IEEE Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected Cables
845-1999
Guide to Evaluation of Man - Machine Performance in Nuclear Power Generating Stations, Control Rooms, and Other Peripheries
830-1998
Recommended Practice for Software Requirements Specifications
829-1998
IEEE Standard for Software Test Documentation
820-1984
IEEE Standard Telephone Loop Performance Characteristics
813-1988
IEEE Specification Format Guide and Test Procedure for Two-Degree-of-Freedom Dynamically Tuned Gyros
81-1983
IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System Part 1: Normal Measurements
810-1987
IEEE Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Runout Tolerances
81.2-1991
IEEE Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding Systems
805-1984
IEEE Recommended Practice for System Identification in Nuclear Power Plants and Related Facilities
803-1983
IEEE Recommended Practice for Unique Identification in Power Plants and Related Facilities - Principles and Definitions
803.1-1992
IEEE Recommended Practice for Unique Identification in Power Plants and Related FacilitiesComponent Function Identifiers
80-2000
AC Substation Grounding, Safety in
802.7-1989
Local Area Networks: IEEE Recommended Practice: Broadband Local Area Networks
802.6j-1995
Local and Metropolitan Area Networks: Supplement to 802.6: Connection-Oriented Service on a Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area Network(MAN)
802.6-1994
Information Technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements-Part 5: Token ring access method and physical layer specifications
802.5t-2000
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Part 5: Token Ring Access Method and Physical Layer Specifications - 100 Mbit/s Dedicated Token Ring Operation (supplement to ANS
802.5r and 802.5j
Part 5: Toden ring access method and physical layer specifications Amendment 1: Dedicated token ring operation and fibre optic media
802.5-1998
Information Technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements-Part 5: Token ring access method and physical layer specifications
802.2-1998
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 2: Logical Link Control
802.1H-1997
Information technology-Telecommunications and information exchange between systems - Local and metropolitan area networks-Technical reports and guidelines-Part 5: Media Access Control (MAC) Bridging
802.1G-1998
Information technology-Telecommunications and information exchanges between systems - Local and Metropolitan area networks-Common specifications-Part 5: Remote Media Access Control (MAC) Bridging
802.1f-1993
Local and Metropolitan Area Networks: Common Definitions and Procedures for IEEE 802 Management Information
802.1d-1998
IEEE Standard for Local Area Network MAC (Media Access Control) Bridges
802.12-1998
Supplement to Information Technology - Local and metropolitan area networks - Specific requirements - Part 12: Demad-priority access method, physical layer and repeater specifications: Full-Duplex Operation
799-1987
IEEE Guide for Handling and Disposal of Transformer Grade Insulating Liquids Containing PCBs
776-1992
IEEE Recommended Practice for Inductive Coordination of Electric Supply and Communications Lines
771-1998
IEEE Guide to the Use of the ATLAS Specification
759-1984
IEEE Standard Test Procedures for Semiconductor X-Ray Energy Spectrometers
758-1979
IEEE Standard Subroutines for CAMAC (Computer Automated Measurements and Control)
739-1995
IEEE Recommended Practice for Energy Management in Industrial and Commercial Facilities
726-1982
IEEE Standard Real-Time BASIC for CAMAC (Computer Automated Measurement and Control)
716-1995
IEEE Standard Test Language for All Systems - Common/Abbreviated Test Language for All Systems (C/ATLAS)
692-1997
IEEE Standard Criteria for Security Systems for Nuclear Power Generating Stations
683-1976
IEEE Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)
675-1982
IEEE Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)
67-1990
IEEE Guide for Operation and Maintenance of Turbine Generators
671-1985
IEEE Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement
665-1995
IEEE Standard for Generating Station Grounding
664-1993
IEEE Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors
661-1979
IEEE Standard Method for Determining Objective Loudness Ratings of Telephone Connections
656-1992
IEEE Standard for the Measurement of Audible Noise From Overhead Transmission Lines
644-1994
IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
638-1992 (R1999)
Qualification of Class 1E Transformers for Nuclear Power Generating Stations
637-1985
IEEE Guide for the Reclamation of Insulating Oil and Criteria for Its Use
628-2001
IEEE Standard Criteria for the Design, Installation and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
622b-1988
IEEE Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating Stations
622a-1984
IEEE Recommended Practice for the Design and Installation of Electric Pipe Heating Control and Alarm Systems for Power Generating Stations
622-1987
IEEE Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Systems
62-1995
IEEE Guide for Diagnostic Field Testing of Electric Power ApparatusPart 1: Oil Filled Power Transformers, Regulators, and Reactors
620-1996
IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
605-1998
IEEE Guide for the Design of Substation Rigid-Bus Structures
603-1998
IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations
602-1996
IEEE Recommended Practice for Electric Systems in Health Care Facilities (White Book)
596-1982
IEEE Standard Parallel Highway Interface System (CAMAC) (Computer Automated Measurement and Control)
595-1982
IEEE Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)
592-1990
IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Insulated Connectors
583-1982
IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)
563-1978
IEEE Guide on Conductor Self-Damping Measurements
535-1986
IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
529-1980
Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of Freedom Rate-Intergrating Gyros
524a-1993
IEEE Guide to Grounding During the Installation of Overhead Transmission Line Conductors
519-1992
IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems
517-1974
IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros
505-1977
IEEE Standard Nomenclature for Generating Station Electric Power Systems
502-1985
IEEE Guide for Protection, Interlocking, and Control of Fossil-Fueled Unit-Connected Steam Stations
499-1997
IEEE Recommended Practice for Cement Plant Electric Drives and Related Electrical Equipment
492-1999
IEEE Guide for the Operation and Maintenance of Hydro Generators
488.2-1992
IEEE Standard Codes, Formats, Protocols, and Common Commands For Use With IEEE Std 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation
485-1997
IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
48-1996
IEEE Standard Test Procedures and Requirements for Alternating-Current Cable Terminations 2.5 kV through 765 kV
473-1985
IEEE Recommended Practice for an Electromagnetic Site Survey (10 kHz to 10 GHz)
469-1988
IEEE Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution Transformers
449-1998
Ferroresonant Voltage Regulators
446-1995
IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications
442-1981
IEEE Guide for Soil Thermal Resistivity Measurements
43-2000
IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery
430-1986
IEEE Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and Substations
421.3-1997
IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines
421.2-1990
IEEE Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems
421.1-1986
IEEE Standard Definitions for Excitation Systems for Synchronous Machines
4-1995
IEEE Standard Techniques for High-Voltage Testing
399-1997
Analysis (IEEE Brown Book), Recommended Practice for Power System
398-1972
IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field
390-1987
IEEE Standard for Pulse Transformers
389-1996
IEEE Recommended Practice for Testing Electronics Transformers and Inductors
388-1992
IEEE Standard for Transformers and Inductors in Electronic Power Conversion Equipment
387-1995
IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
379-2000
IEEE Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
377-1980
IEEE Recommended Practice for Measurement of Spurious Emission from Land-Mobile Communication Transmitters
367-1996
Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
352-1987
IEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems
338-1987
IEEE Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
325-1996
IEEE Standard Test Procedures for Germanium Gamma-Ray Detectors
32-1972
IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
317-1983
IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
315-1975
Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)
301-1988
IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing Radiation
300-1988
IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors
295-1969
IEEE Standard for Electronics Power Transformers
292-1969
IEEE Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
280-1985
IEEE Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering
277-1994
IEEE Recommended Practice for Cement Plant Power Distribution
267-1966
IEEE Trial-Use Recommended Practice for the Preparation and Use of Symbols
260.4-1996
American National Standard Letter Symbols and Abbreviations for Quantities Used in Acoustics
260.3-1993
Mathematical Signs and Symbols for Use in Physical Sciences and Technology (revision and redesignation of ANSI/ASME Y10.20-1990)
259-1999
Standard Test Procedure for Evaluation of Systems of Insulation for Specialty
252-1995
IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
241-1990
IEEE Recommended Practice for Electric Power Systems in Commercial Buildings
211-1997
IEEE Standard for the Definitions of Terms for Radio Wave Propagation
208-1995
IEEE Standard on Video Techniques: Measurement of Resolution of Camera Systems, 1993 Techniques
187-1990
IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast Receivers
176-1987
IEEE Standard on Piezoelectricity
16509-1999
Information technology ? Year 2000 terminology
1596-1992
IEEE Standard for Scalable Coherent Interface (SCI)
15802-5-1998
(ANSI/IEEE std 802.1G, 1998 Edition) Information technologyTelecommunications and information exchanges between systemsLocal and Metropolitan area networksCommon specificationsPart 5: Remote Media Access Control (MAC) Bridging
15802-4-1994
ISO/IEC 15802-4:1994: Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications - Part 4: System load protocol
15802-2-1995
ISO/IEC 15802-2:1995: Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications - Part 2: LAN/MAN management
15287-2-2000
ISO/IEC 15287-2:2000 (IEEE Std 1003.13, 1998 Edition) Information technologyStandardized Application Environment ProfilePart 2: Posix Realtime Application Support (AEP)
15205-2000
ISO/IEC 15205:2000 (IEEE Std 1496-1993) Standard for a Chip Module Interconnect Bus: SBus
1517-1999
Standard for Information Technology - Software Life Cycle Processes - Reuse Processes
1516-2000
IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) - Framework and Rules
1516.2-2000
IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) - Object Model Template (OMT) Specification
1516.1-2000
IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) Federate Interface Specification
15068.1-1999
Information technology ? Portable Operating System Interface (POSIX?) system administration ? Part 2: Software administration
1499-1998
Standard Interface for Hardware Description Models of Electronic Components
149-1979
IEEE Standard Test Procedures for Antennas
1489-1999
Standard for Data Dictionaries for Intelligent Transportation Systems
1488-2000
IEEE Trial Use Standard for Message Set Template for Intelligent Transportation Systems
1483-2000
IEEE Standard for Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control
1483-2000
IEEE Standard for Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control
1482.1-1999
Standard for Rail Transit Vehicle Event Recorder
1482.1-1999
Standard for Rail Transit Vehicle Event Recorder
1481-1999
Standard for Delay and Power Calculation System
1481-1999
Standard for Delay and Power Calculation System
1477-1998
IEEE Standard for Passenger Information System for Rail Transit Vehicles
1477-1998
IEEE Standard for Passenger Information System for Rail Transit Vehicles
1475-1999
Functioning of and Interfaces Among Propulsion, Friction Brake and Train-Borne Master Control on Rail Rapid Transit Vehicles
1475-1999
Functioning of and Interfaces Among Propulsion, Friction Brake and Train-Borne Master Control on Rail Rapid Transit Vehicles
1473-1999
Communications Protocol Aboard Trains
1473-1999
Communications Protocol Aboard Trains
1465-1998
ISO/IEC 12119 International Standard - Information Technology - Software Packages - Quality Requirements and Testing
1465-1998
ISO/IEC 12119 International Standard - Information Technology - Software Packages - Quality Requirements and Testing
1460-1996
IEEE Guide for the Measurement of Quasi-Static Magnetic and Electric Fields
1460-1996
IEEE Guide for the Measurement of Quasi-Static Magnetic and Electric Fields
1455-1999
Standard for Message Sets for Vehicle/Roadside Communications
1455-1999
Standard for Message Sets for Vehicle/Roadside Communications
14536-1995
ISO/IEC 14536:1995 ANSI/IEEE Std 896.5-1995 Information technology - Microprocessor systems - Futurebus+A(r), Profile M (Military)
14536-1995
ISO/IEC 14536:1995 ANSI/IEEE Std 896.5-1995 Information technology - Microprocessor systems - Futurebus+A(r), Profile M (Military)
145-1993
IEEE Standard Definitions of Terms for Antennas
14515-1_2000
ISO/IEC 14515-1:2000 (E), Information TechnologyPortable Operating System Interface (POSIX)Test Methods for Measuring Conformance to POSIXPart 1: System Interfaces
1451.2-1997
Smart Transducer Interface for Sensors and Actuators - Transducer to Microprocessor Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
1451.1-1999
Standard for a Smart Transducer Interface for Sensors and Actuators - Network Capable Application Processor (NCAP) Information Model
1450-1999
Standard Test Interface Language (STIL) for Digital Test Vector Data
1445-1998
Standard for Digital Test Interchange Format (DTIF)
1420.1b-1999
IEEE Standard for Information Technology - Software Reuse - Data model for Reuse Library Interoperability: Intellectual Property Rights Framework
1420.1a-1996
Supplement to IEEE Standard for Information Technology-Software Reuse-Data Model for Reuse Library Interoperability: Asset Certification Framework Developed in cooperation with the Reuse Library Interoperability Group (RIG)
1420.1-1995
IEEE Standard for Information Technology - Software Reuse - Data Model for Reuse Library Interoperability: Basic Interoperability Data Model (BIDM)
1416-1998
Recommended Practice for the Interface of New Gas Insulated Equipment in Existing Gas Insulated Substations
14143.1-2000
Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of Concepts
1413-1998
IEEE Standard Methodology for Reliability Predictions and Assessment for Electronic Systems Equipment
141-1993
IEEE Recommended Practice for Electric Power Distribution for Industrial Plants (IEEE Red Book)
1406-1998
Trial-Use Guide to the Use of Gas-In-Fluid Analysis for Electric Power Cable Systems
1402-2000
Guide for Electric Power Substations Physical and Electronic Security
139-1988
IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User's Premises
1390-1995
IEEE Standard for Utility Telemetry Service Architecture for Switched Telephone Network
1390.3-1999
Automatic Meter Reading via Telephone - Network to Utility Controller
1390.2-1999
Standard for Utility Telemetry Service - Telemetry Interface Unit (TIU) to Telephone Network
1386-2001
IEEE Standard for a Common Mezzannine Card Family: CMC
1386.1-2001
IEEE Standard Physical and Environmental Layers for PCI Mezzanine Cards: PMC
1379-2000
IEEE Recommended Practice for Data Communications Between Remote Terminal Units and Intelligent Electronic Devices in a Substation
1378-1997
IEEE Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission Systems
1377-1997
IEEE Standard for Utility Industry End Device Tables - Revision 1
1375-1998
IEEE Guide for Protection of Stationary Battery Systems
1362-1998
IEEE Guide for Information TechnologySystem DefinitionConcept of Operation Document
1349-2001
IEEE Guide for Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations
1346-1998
IEEE Recommended Practice For Evaluating Electric Power System Compatibility With Electronic Process Equipment
1333-1994
IEEE Guide for Installation of Cable Using the Guided Boring Method
1332-1998
IEEE Standard Reliability Program for the Development and Production of Electronic Sytems and Equipment
1329-1999
Standard Method for Measuring Transmission Performance of Handsfree Telephone Sets
1325-1996
IEEE Recommended Practice for Reporting Field Failure Data for Power Circuit Breakers
13213-1994
ISO/IEC 13213:1994, Information technologyMicroprocessor systemsControl and Status Registers (CSR) Architecture for microcomputer buses
13210-1999
Information TechnologyTest Methods for Measuring Conformance to POSIX
1320.2-1998
IEEE Standard for Conceptual Modeling Language - Syntax and Semantics for IDEF1X97 (IDEFobject)
1320.1-1998
Standard for Functional Modeling Language - Syntax and Semantics for IDEFO
1313.2-1999
Guide for the Application of Insulation Coordination
1313.1-1996
IEEE Standard for Insulation Coordination - Definitions, Principles and Rules
1312-1993
IEEE Standard for Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal
1310-1996
IEEE Trial Use Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
1308-1994
IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz
1303-1994
IEEE Guide for Static Var Compensator Field Tests
1301-1991
IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordinating Document
1301.4-1996
IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document for Mezzanine Cards
1301.3-1992
IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connector
1301.2-1993
IEEE Recommended Practices for the Implementation of a Metric Equipment Practice (IEEE Std 1301-1991)
1301.1-1991
IEEE Standard for Metric Equipment Practice for Microcomputers Convention-Cooled with 2 mm Connectors
1300-1996
IEEE Guide for Cable Connections for Gas-Insulated Substations
1293-1998
IEEE Standard Specification Format Guide and Test Procedures for Linear, Single-Axis, Non-Gyroscopic Accelerometers
1291-1993
IEEE Guide for Partial Discharge Measurements in Power Switchgear
1290-1996
IEEE Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
1289-1998
IEEE Guide for the Application of Human Factors Engineering in the Design of Cumputer-Based Monitoring and Control Displays for Nuclear Power Generating Stations
1284.1-1997
IEEE Standard for Information TechnologyTransport Independent Printer/System Interface (TIP/SI)
1278.4-1997
IEEE Recommended Practice for Distributed Interactive Simulation - Verification, Validation and Accreditation
1278.3-1996
IEEE Recommended Practice for Distributed Interactive SimulationA-Exercise Management and Feedback
1278.2-1995
IEEE Standard for Distributed Interactive SimulationA-Communication Services and Profiles
1278.1a-1998
IEEE Standard for Distributed Interactive SimulationApplication Protocols
1278.1-1995
IEEE Standard for Distributed Interactive Simulation - Application Protocols
1277-2000
IEEE Trial-Use General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
1276-1997
IEEE Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers
1267-1999
Trial Use Guide for Development of Specifications for Turnkey Substation Projects
1264-1993
IEEE Guide for Animal Deterrents for Electric Power Supply Substations
1260-1996
IEEE Guide on the Prediction, Measurement and Analysis of AM Broadcast Reradiation by Power Lines
1249-1996
IEEE Guide for Computer-Based Control for Hydroelectric Power Plant Automation
1248-1998
IEEE Guide for the Commissioning of Electrical Systems In Hydroelectric Power Plants
1247-1998
IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1,000 Volts
1243-1997
Design Guide for Improving the Lightning Performance of Transmission Lines
1241-2000
IEEE Standard for Terminology and Test Methods for Analog-to-Digital Converters
1233-1998
IEEE Guide for Developing System Requirements Specifications
1232.2-1998
IEEE Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE): Service Specification
1232.1-1997
IEEE Trial-Use Standard for Artificial Intelligence Exchange and Service Tie to All Test (AI-ESTATE): Data and Knowledge Specification
1232.1-1997
IEEE Trial-Use Standard for Artificial Intelligence Exchange and Service Tie to All Test (AI-ESTATE): Data and Knowledge Specification
1228-1994
IEEE Standard for Software Safety Plans
1228-1994
IEEE Standard for Software Safety Plans
1227-1990
IEEE Guide for the Measurement of DC Electric- Field Strength and Ion Related Quantities
1227-1990
IEEE Guide for the Measurement of DC Electric- Field Strength and Ion Related Quantities
1224/1224.1/1327-1994
IEEE Standards Interpretations for Std 1224-1993, Std 1327.1-1993, Std 1224.1-1993
1224/1224.1/1327-1994
IEEE Standards Interpretations for Std 1224-1993, Std 1327.1-1993, Std 1224.1-1993
122-1991
IEEE Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units
122-1991
IEEE Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units
1214-1992
IEEE Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear Spectroscopy
1214-1992
IEEE Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear Spectroscopy
1212.1-1993
IEEE Standard for Communicating Among Processors and Peripherals Using Shared Memory (Direct Memory Access(DMA)
1212.1-1993
IEEE Standard for Communicating Among Processors and Peripherals Using Shared Memory (Direct Memory Access(DMA)
1206-1994
IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
1206-1994
IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
1204-1997
Guide for Planning DC Links Terminating at AC System Locations Having Low Short Circuit Capacities, Parts I and II
1204-1997
Guide for Planning DC Links Terminating at AC System Locations Having Low Short Circuit Capacities, Parts I and II
120-1989
IEEE Master Test Guide for Electrical Measurements in Power Circuits
120-1989
IEEE Master Test Guide for Electrical Measurements in Power Circuits
1-2000
IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation
1185-1994
IEEE Guide for Installation Methods for Generating Station Cables
1181-1991
IEEE Recommended Practice for Latchup Test Methods for CMOS and BiCMOS Integrated- Circuit Process Characterization
11802-5-1997
ISO/IEC 11802-5 ANSI/IEEE Std 802.1H, 1997 Edition, Information technologyTelecommunications and information exchange between systemsLocal and metropolitan area networksTechnical reports and guidelinesPart 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks
1178-1990
IEEE Standard for the Scheme Programming Language
1164-1993
IEEE Standard Multivalue Logic System for VHDL Model Interoperability (Std_logic_1164)
1160-1993
IEEE Test Procedures for High-Purity Germanium Crystals for Radiation Detectors
1159-1995
IEEE Recommended Practice on Monitoring Electrical Power Quality
1156.4-1997
IEEE Standard for Environmental Specifications for Spaceborne Computer Modules
1156.2-1996
IEEE Standard for Environmental Specifications for Computer Systems
1156.1-1993
IEEE Standard for Microcomputer Environmental Specifications for Computer Modules
1155-1992
IEEE Standard for VMEbus Extensions for Instrumentation: VXIbus
115-1995
IEEE Guide: Test Procedures for Synchronous Machines Part I-Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic Analysis
1149.5-1995
IEEE Standard for Module Test and Maintenance Bus (MTM-Bus) Protocol
1149.4-1999
Standard for a Mixed-Signal Test Bus
1143-1994
IEEE Guide on Shielding Practice for Low Voltage Cables
1142-1995
IEEE Guide for the Design, Testing, and Application of Moisture-Impervious, Solid Dielectric, 5-35 kV Power Cable Using Metal-Plastic Laminates
1140-1994
IEEE Standard for the Measurement of Electric and Magnetic Fields from Video Display Terminals (VDTs) from 5 Hz to 400 kHz
1139-1999
Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities
1138-1994
IEEE Standard Construction of Composite Fiber Optic Groundwire (OPGW) for Use on Electric Utility Power Lines
1137-1991
IEEE Guide for the Implementation of Inductive Coordination Mitigation Techniques and Applications
1128-1998
IEEE Recommended Practice for RF Absorber Performance Evaluation in the Range 30 MHz to 5 GHz
1127-1998
Guide for the Design, Construction, and Operation of Safe and Reliable Substations for Environmental Acceptance
1125-1993
IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
1122-1998
IEEE Standard for Digital Recorders for Measurements in High Voltage Impulse Tests
11-2000
Rail and Road Vehicles, Rotating Electric Machinery for
1101.2-1992
IEEE Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards
1101.1-1998
IEEE Standard for Mechanical Core Specifications for Microcomputers Using IEC 603-2 Connectors
1101.11-1998
IEEE Standard for Mechanical Rear Plug-in Units Specifications for Microcomputers Using the IEEE 1101.10 Equipment Practice
1101.10-1996
IEEE Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE 1101.1-1991 Equipment Practice
1095-1989
IEEE Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications
10861-1994
ISO/IEC 10861:1994: Information TechnologyHigh-performance synchronous 32-bit bus: MULTIBUS II
10857-1994
ISO/IEC 10857:1994: Information Technology Microprocessor Systems Futurebus+A(r) - Logical Protocol specification
1082-1997
Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations
1076.3-1997
IEEE Standard VHDL Synthesis Packages
1076.2-1996
IEEE Standard VHDL Language Math Packages
1073-1996
IEEE Standard for Medical Device Communications - Overview and Framework
1073.4.1-2000
IEEE Standard for Medical Device Communications--Physical Layer Interface--Cable Connected--Amendment1: Corrections and Clarifications
1073.3.2-2000
Medical Device Communications - Transport Profile - IrDA Based - Cable Connected
1069-1991
IEEE Recommended Practice for Precipitator and Baghouse Hopper Heating Systems
1068-1996
IEEE Recommended Practice for the Repair and Rewinding of Motors for the Petroleum and Chemical Industry
1062-1998
IEEE Recommended Practice for Software Acquisition
1061-1998
IEEE Standard for a Software Quality Metrics Methodology
1058-1998
IEEE Standard for Software Project Management Plans
1058.1-1987
IEEE Standard for Software Project Management Plans
1057-1994
IEEE Standard for Digitizing Waveform Recorders
1046-1991
IEEE Application Guide for Distributed Digital Control and Monitoring for Power Plants
1045-1992
IEEE Standard for Software Productivity Metrics
1044-1993
IEEE Standard Classification for Software Anomalies
1043-1996
IEEE Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils
1037-1992
IEEE Standard Terms and Definitions for Surface Acoustic Wave (SAW) Devices
1036-1992
IEEE Guide for Application of Shunt Power Capacitors
1031-2000
Guide for the Functional Specification of Transmission Static VAR Compensators
1027-1996
IEEE Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone Receiver
1026-1995
IEEE Recommended Practice for Test Methods for Determination of Compatibility of Materials With Conductive Polymeric Insulation Shields and Jackets
1025-1993
IEEE Guide to the Assembly and Erection of Concrete Pole Structures
1023-1988
IEEE Guide for the Application of Human Factors Engineering to Systems, Equipment and Facilities of Nuclear Power Generating Stations
1020-1988
IEEE Guide for Control of Small Hydroelectric Power Plants
1016-1998
IEEE Recommended Practice for Software Design Descriptions
1014-1987
IEEE Standard for A Versatile Backplane Bus: VMEbus
1012a-1998
IEEE Standard for Software Verification and Validation - Content Map to IEEE 12207.1
1012a-1998
IEEE Standard for Software Verification and Validation - Content Map to IEEE 12207.1
101-1987
IEEE Guide for the Statistical Analysis of Thermal Life Test Data
101-1987
IEEE Guide for the Statistical Analysis of Thermal Life Test Data
1010-1987
IEEE Guide for Control of Hydroelectric Power Plants
1010-1987
IEEE Guide for Control of Hydroelectric Power Plants
1008-1987
IEEE Standard for Software Unit Testing
1008-1987
IEEE Standard for Software Unit Testing
1003.9-1992
IEEE Standard for InformationTechnology - POSIXA(r) FORTRAN 77 Language Interfaces - Part 1: Binding for System Application Program Interface (API)
1003.9-1992
IEEE Standard for InformationTechnology - POSIXA(r) FORTRAN 77 Language Interfaces - Part 1: Binding for System Application Program Interface (API)
1003.5b-1996
IEEE Standard for Information TechnologyPOSIXA(r) Ada Language InterfacesPart 1: Binding for System Application Program Interface (API)Amendment 1: Realtime Extensions
1003.5b-1996
IEEE Standard for Information TechnologyPOSIXA(r) Ada Language InterfacesPart 1: Binding for System Application Program Interface (API)Amendment 1: Realtime Extensions
1003.5-1999
IEEE Standard for Information Technology--POSIX& Ada Language Interfaces--Part 1: Binding for System Application Program Interface (API)--Amendment 2: Protocol - Independent Interfaces
1003.5-1999
IEEE Standard for Information Technology--POSIX& Ada Language Interfaces--Part 1: Binding for System Application Program Interface (API)--Amendment 2: Protocol - Independent Interfaces
1003.5-1992_INT_MAR94
IEEE Standard for Information Technology POSIX Ada Language Interfaces PART 1: Binding for System Application Program Interface (API)
1003.5-1992_INT_MAR94
IEEE Standard for Information Technology POSIX Ada Language Interfaces PART 1: Binding for System Application Program Interface (API)
1003.2/INT-MAR94
IEEE Standards Interpretations for IEEE Std 1003.2-1992
1003.2/INT-MAR94
IEEE Standards Interpretations for IEEE Std 1003.2-1992
1003.2/INT-DEC94
IEEE Standards Interpretations for IEEE Std 1003.2-1992
1003.2/INT-DEC94
IEEE Standards Interpretations for IEEE Std 1003.2-1992

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm