http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint (FOREIGN STANDARD)
DIN EN 924:2003
Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surfaces (FOREIGN STANDARD)
DIN EN 828:1998
Adhesives - Determination of conventional solids content and constant mass solids content (FOREIGN STANDARD)
DIN EN 827:2006
DIN EN 728:1997
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time (FOREIGN STANDARD)
DIN EN 549:1995
Rubber materials for seals and diaphragms for and gas equipment (FOREIGN STANDARD)
Adhesives - Determination of apparent density of powder and granule adhesives (FOREIGN STANDARD)
DIN EN 543:2003
Adhesives - Determination of density (FOREIGN STANDARD)
DIN EN 542:2003
DIN EN 514:2000
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints; English version of DIN EN 514 (FOREIGN STANDARD)
DIN EN 513:1999
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering (FOREIGN STANDARD)
DIN EN 479:1995
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion (FOREIGN STANDARD)
DIN EN 478:1995
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of appearance after exposure at 150 ?C (FOREIGN STANDARD)
DIN EN 477:1995
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass (FOREIGN STANDARD)
DIN EN 438-8:2009
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates; German version EN 438-8:2009 (Foreign Standard)
DIN EN 438-7:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes (FOREIGN STANDARD)
DIN EN 438-6:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater (FOREIGN STANDARD)
DIN EN 438-5:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bond (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 438-4:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater (FOREIGN STANDARD)
DIN EN 438-3:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates (FOREIGN STANDARD)
DIN EN 438-2:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties (FOREIGN STANDARD)
DIN EN 438-1:2005
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information (FOREIGN STANDARD)
DIN EN 422:1995
Safety of rubber and plastics machines - Blow moulding machines intended for the production of hollow articles - Requirements for design and construction (FOREIGN STANDARD)
DIN EN 40-7:2003
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns (FOREIGN STANDARD)
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the conventional working life (FOREIGN STANDARD)
DIN EN 302-7:2004
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time (FOREIGN STANDARD)
DIN EN 302-6:2004
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength (FOREIGN STANDARD)
DIN EN 302-3:2006
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2006 (FOREIGN STANDARD)
DIN EN 301:2006
DIN EN 289:2009
Plastics and rubber machines - Presses - Safety requirements; German version EN 289:2004+A1:2008 (Foreign Standard)
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 2: 180? peel (ISO 8510-2:1990) (FOREIGN STANDARD)
DIN EN 28510-2:1993
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90? peel (ISO 8510-1:1990) (FOREIGN STANDARD)
DIN EN 28510-1:1993
DIN EN 263:2008
Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes; German version EN 263:2008 (FOREIGN STANDARD)
Classification of thermoplastic wood adhesives for non-structural applications; English version of DIN EN 204 (FOREIGN STANDARD)
DIN EN 204:2001
DIN EN 201:1997
Rubber and plastics machines - Injection moulding machines - Safety requirements (FOREIGN STANDARD)
DIN EN 201/A2:2005
Plastics and rubber machines - Injection moulding machines - Safety requirements (FOREIGN STANDARD)
DIN EN 201/A1:2000
Rubber and plastics machines - Injection moulding machines - Safety requirements; English version of DIN EN 201:1997/A1:2000 (FOREIGN STANDARD)
DIN EN 1967:2003
Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method (FOREIGN STANDARD)
DIN EN 1966:2009
Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009 (Foreign Standard)
DIN EN 1945:1996
Self-adhesive tapes - Measurement of quick stick (FOREIGN STANDARD)
DIN EN 1944:1996
Self-adhesive tapes - Measurement of unwind adhesion at low speed (FOREIGN STANDARD)
DIN EN 1943:2003
Self-adhesive tapes - Measurement of static shear adhesion (FOREIGN STANDARD)
DIN EN 1942:2008
Self adhesive tapes - Measurement of Thickness; German version EN 1942:2008 (FOREIGN STANDARD)
DIN EN 1905:1999
Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content (FOREIGN STANDARD)
Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing; German version EN 1903:2008 (FOREIGN STANDARD)
DIN EN 1903:2008
DIN EN 1902:1999
Test method for adhesives for floor coverings and wall coverings - Shear creep test (FOREIGN STANDARD)
Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; English version of DIN EN 1896 (FOREIGN STANDARD)
DIN EN 1896:2001
Adhesives for paper and board, packaging and disposable sanitary products - 180?-"T" Peel test for a flexible-to-flexible assembly; German version EN 1895:2001, Corrigenda to DIN EN 1895:2002-02; German version EN 1895:2001/AC:2007 (FOREIGN STANDARD)
DIN EN 1895 Berichtigung 1:2007
Adhesives for paper and board, packaging and disposable sanitary products - 180? "T" peel test for a flexible-to-flexible assembly; English version of DIN EN 1895 (FOREIGN STANDARD)
DIN EN 1895:2002
DIN EN 1842:1997
Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage (FOREIGN STANDARD)
DIN EN 1841:1999
Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (FOREIGN STANDARD)
DIN EN 1799:1999
Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surfaces (FOREIGN STANDARD)
Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment (FOREIGN STANDARD)
DIN EN 1778:1999
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of rolling ball tack (FOREIGN STANDARD)
DIN EN 1721:1998
Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability (FOREIGN STANDARD)
DIN EN 1720:1998
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack (FOREIGN STANDARD)
DIN EN 1719:1998
DIN EN 1612-2:2000
Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant; English version DIN EN 1612-2 (FOREIGN STANDARD)
DIN EN 1612-1:2009
Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units; German version EN 1612-1:1997+A1:2008 (Foreign Standard)
Cellular Plastics - Cell count procedure for flexible and rigid polyurethane; German version EN 15702:2008 (Foreign Standard)
DIN EN 15702:2009
DIN EN 15701:2009
Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods; German version EN 15701:2009 (Foreign Standard)
Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements; German version EN 15425:2008 (FOREIGN STANDARD)
DIN EN 15425:2008
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time; German version EN 15416-5:2006 (FOREIGN STANDARD)
DIN EN 15416-5:2006
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives; German version EN 15416-4:2006 (FOREIGN STANDARD)
DIN EN 15416-4:2006
Adhesives for load bearing timber structures - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German version EN 15416-3:2007 (FOREIGN STANDARD)
DIN EN 15416-3:2008
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear; German version EN 15416-2:2007 (FOREIGN STANDARD)
DIN EN 15416-2:2008
Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990, modified); German version EN 15337:2007 (FOREIGN STANDARD)
DIN EN 15337:2007
Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified); German version EN 15336:2007 (FOREIGN STANDARD)
DIN EN 15336:2007
DIN EN 15334:2007
Sanitary appliances - Methacrylic dispersions of high filler content; German version EN 15334:2007 (FOREIGN STANDARD)
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; German version EN 15307:2007 (FOREIGN STANDARD)
DIN EN 15307:2007
DIN EN 15275:2008
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures; German version EN 15275:2007 (FOREIGN STANDARD)
DIN EN 15274:2008
General purpose adhesives for structural assembly - Requirements and test methods; German version EN 15274:2007 (FOREIGN STANDARD)
DIN EN 15190:2007
Structural adhesives - Test methods for assessing long term durability of bonded metallic structures; German version EN 15190:2007 (FOREIGN STANDARD)
DIN EN 15067:2008
Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements; German version EN 15067:2007 (FOREIGN STANDARD)
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions; German version EN 15062:2006 (FOREIGN STANDARD)
DIN EN 15062:2006
DIN EN 14963:2006
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods; German version EN 14963:2006 (FOREIGN STANDARD)
DIN EN 14934:2007
Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 14934:2007 (FOREIGN STANDARD)
DIN EN 14933:2007
Thermal insulation and light weigth fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 14933:2007 (FOREIGN STANDARD)
DIN EN 14886:2008
Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements; German version EN 14886:2008 (FOREIGN STANDARD)
DIN EN 14869-2:2004
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) (FOREIGN STANDARD)
DIN EN 14869-1:2004
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) (FOREIGN STANDARD)
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications; German version EN 14814:2007 (FOREIGN STANDARD)
DIN EN 14814:2008
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding (FOREIGN STANDARD)
DIN EN 14713:2006
Adhesives for non-pressure thermoplastic piping systems - Specifications; German version EN 14680:2006 (FOREIGN STANDARD)
DIN EN 14680:2006
Adhesives - Determination of tensile lap-shear strength of bonded assemblies; German version EN 1465:2009 (Foreign Standard)
DIN EN 1465:2009
Adhesives - Determination of peel resistance of high-strength adhesive bonds by the floating roller method (ISO 4578:1990, modified) (FOREIGN STANDARD)
DIN EN 1464:1995
DIN EN 14598-3:2005
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements (FOREIGN STANDARD)
DIN EN 14598-2:2005
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements (FOREIGN STANDARD)
DIN EN 14598-1:2005
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation (FOREIGN STANDARD) (FOREIGN STANDARD)
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) (FOREIGN STANDARD)
DIN EN 14510:2005
DIN EN 14469-4:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials (FOREIGN STANDARD)
DIN EN 14469-3:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments (FOREIGN STANDARD)
DIN EN 14469-2:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens (FOREIGN STANDARD)
DIN EN 14469-1:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures (FOREIGN STANDARD)
DIN EN 14447:2005
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification (FOREIGN STANDARD)
DIN EN 14444:2006
Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) (FOREIGN STANDARD)
DIN EN 14410:2003
Self-adhesive tapes - Measurement of breaking strength and elongation at break (FOREIGN STANDARD)
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements; German version EN 14293:2006 (FOREIGN STANDARD)
DIN EN 14293:2006
Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature (FOREIGN STANDARD)
DIN EN 14292:2005
Adhesives for floor coverings - Requirements for mechanical and electrical performance (FOREIGN STANDARD)
DIN EN 14259:2004
DIN EN 14258:2005
Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature (FOREIGN STANDARD)
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91); German version EN 14257:2006 (FOREIGN STANDARD)
DIN EN 14257:2006
Adhesives for non-structural wood applications - Test method and requirements for resistance to static load; German version EN 14256:2007 (FOREIGN STANDARD)
DIN EN 14256:2007
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners (FOREIGN STANDARD)
DIN EN 14241-1:2005
DIN EN 1417:1997
Rubber and plastics machines - Two roll mills - Safety requirements (FOREIGN STANDARD)
DIN EN 1417/A1:2008
Rubber and plastics machines - Two roll mills - Safety requirements; English version EN 1417:1996/prA1:2008 (FOREIGN STANDARD)
DIN EN 14022:2003
Structural adhesives - Determination of the pot life (working life) of multicomponent adhesives (FOREIGN STANDARD)
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds; German version EN 13999-2:2007 (FOREIGN STANDARD)
DIN EN 13999-2:2007
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure; German version EN 13999-1:2006 (FOREIGN STANDARD)
DIN EN 13999-1:2006
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions; German version EN 1392:2006 (FOREIGN STANDARD)
DIN EN 1392:2006
DIN EN 13900-5:2005
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13900-4:2004
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13900-3:2003
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (FOREIGN STANDARD)
DIN EN 13900-2:2003
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (FOREIGN STANDARD)
DIN EN 13900-1:2003
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (FOREIGN STANDARD)
DIN EN 13733:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding (FOREIGN STANDARD)
DIN EN 1373:1999
Test method for adhesives for floor and wall coverings - Shear test (FOREIGN STANDARD)
DIN EN 1372:1999
Test method for adhesives for floor and wall coverings - Peel test (FOREIGN STANDARD)
DIN EN 13706-3:2003
Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements (FOREIGN STANDARD)
DIN EN 13706-2:2003
Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements (FOREIGN STANDARD)
DIN EN 13706-1:2003
Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation (FOREIGN STANDARD)
DIN EN 13677-3:2003
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements (FOREIGN STANDARD)
DIN EN 13677-2:2003
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements (FOREIGN STANDARD)
DIN EN 13677-1:2003
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation (FOREIGN STANDARD)
DIN EN 13655:2003
Plastics - Mulching thermoplastic films for use in agriculture and horticulture (FOREIGN STANDARD)
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives; German version EN 1348:2007 (FOREIGN STANDARD)
DIN EN 1348:2007
Adhesives for tiles - Determination of wetting capability; German version EN 1347:2007 (FOREIGN STANDARD)
DIN EN 1347:2007
Adhesives for tiles - Determination of open time; German version EN 1346:2007 (FOREIGN STANDARD)
DIN EN 1346:2007
DIN EN 13418:2004
Rubber and plastics machines - Winding machines for film or sheet - Safety requirements (FOREIGN STANDARD) (FOREIGN STANDARD)
Adhesives - Test of adhesives for floor coverings - Determination of the electrical resistance of adhesive films (FOREIGN STANDARD)
DIN EN 13415:2002
DIN EN 13245-2:2008
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes; German version EN 13245-2:2008 (Foreign Standard)
DIN EN 13245-1:2004
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles (FOREIGN STANDARD)
Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives; German version EN 1324:2007 (FOREIGN STANDARD)
DIN EN 1324:2007
Adhesives for tiles - Concrete slabs for tests; German version EN 1323:2007 (FOREIGN STANDARD)
DIN EN 1323:2007
Adhesives for tiles - Determination of slip; German version EN 1308:2007 (FOREIGN STANDARD)
DIN EN 1308:2007
Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature; English version of DIN EN 12964 (FOREIGN STANDARD)
DIN EN 12964:2001
Adhesives - Determination of free monomer content of adhesives based on synthetic polymers; English version of DIN EN 12963 (FOREIGN STANDARD)
DIN EN 12963:2001
Adhesives - Determination of elastic behaviour of liquid adhesives ("elasticity index"); English version of DIN EN 12962 (FOREIGN STANDARD)
DIN EN 12962:2001
Adhesives for leather and footwear materials - Determination of optimum activation temperature and maximum activation life of solvent-based and dispersion adhesives; English version of DIN EN 12961 (FOREIGN STANDARD)
DIN EN 12961:2001
Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; German version EN 12960:2001, Corrigenda to DIN EN 12960:2001-06; German version EN 12960:2001/AC:2007 (FOREIGN STANDARD)
DIN EN 12960 Berichtigung 1:2007
Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; English version of DIN EN 12960 (FOREIGN STANDARD)
DIN EN 12960:2001
Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling (FOREIGN STANDARD)
DIN EN 12877-4:2000
Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test (FOREIGN STANDARD)
DIN EN 12877-3:2000
Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding (FOREIGN STANDARD)
DIN EN 12877-2:2000
Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction (FOREIGN STANDARD)
DIN EN 12877-1:2000
DIN EN 12860:2002
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 12808-5:2009
Grouts for tiles - Part 5: Determination of water absorption; German version EN 12808-5:2008 (Foreign Standard)
DIN EN 12808-3:2009
Grouts for tiles - Determination of flexural and compressive strength; German version EN 12808-3:2008 (Foreign Standard)
DIN EN 12808-2:2009
Grouts for tiles - Part 2: Determination of resistance to abrasion; German version EN 12808-2:2008 (Foreign Standard)
DIN EN 12808-1:2009
Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars; German version EN 12808-1:2008 (Foreign Standard)
Classification of thermosetting wood adhesives for non-structural applications; English version of DIN EN 12765 (FOREIGN STANDARD)
DIN EN 12765:2001
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration (FOREIGN STANDARD)
DIN EN 12705:1999
Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation of aqueous adhesives (FOREIGN STANDARD)
DIN EN 12704:2000
Adhesives for paper and board, packaging and disposable sanitary products -Determination of low temperature flexibility or cold crack temperature (FOREIGN STANDARD)
DIN EN 12703:1999
Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers; English version of DIN EN 12702 (FOREIGN STANDARD)
DIN EN 12702:2000
DIN EN 12608:2003
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods (FOREIGN STANDARD)
DIN EN 12576:1998
Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC (FOREIGN STANDARD)
DIN EN 12575:1998
Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC (FOREIGN STANDARD)
Adhesives - Determination of ash and sulphated ash (FOREIGN STANDARD)
DIN EN 1246:1998
Adhesives - Determination of pH - Test method (FOREIGN STANDARD)
DIN EN 1245:1998
Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light (FOREIGN STANDARD)
DIN EN 1244:1998
Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements; English version of DIN EN 12436 (FOREIGN STANDARD)
DIN EN 12436:2002
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates (FOREIGN STANDARD)
DIN EN 1243:1999
Adhesives - Determination of isocyanate content (FOREIGN STANDARD)
DIN EN 1242:2006
Adhesives - Determination of acid value (FOREIGN STANDARD)
DIN EN 1241:1998
DIN EN 12409:2009
Plastics and rubber machines - Thermoforming machines - Safety requirements; German version EN 12409:2008 (Foreign Standard)
Adhesives - Determination of hydroxyl value and/or hydroxyl content (FOREIGN STANDARD)
DIN EN 1240:1998
Adhesives - Freeze-thaw stability (FOREIGN STANDARD)
DIN EN 1239:1998
Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) (FOREIGN STANDARD)
DIN EN 1238:1999
DIN EN 12301:2000
Rubber and plastics machines - Calenders - Safety requirements; English version of DIN EN 12301 (FOREIGN STANDARD)
DIN EN 12301/A1:2008
Rubber and plastic machines - Calenders - Safety requirements; English version EN 12301:2000/prA1:2008 (FOREIGN STANDARD)
DIN EN 12192-2:1999
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents (FOREIGN STANDARD)
Determination of moisture content in thermoplastics by coulometry (FOREIGN STANDARD)
DIN EN 12118:1997
DIN EN 12099:1997
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile matter content (FOREIGN STANDARD)
Adhesives - Determination of viscosity; English version of DIN EN 12092 (FOREIGN STANDARD)
DIN EN 12092:2002
DIN EN 12023:1996
Self-adhesive tapes - Measurement of water vapour transmission in a warm humid atmosphere (FOREIGN STANDARD)
DIN EN 12013:2000
Rubber and plastics machines - Internal mixers - Safety requirements; English version of DIN EN 12013 (FOREIGN STANDARD)
DIN EN 12013/A1:2008
Plastics and rubber machines - Internal mixers - Safety requirements; English version EN 12013:2000/prA1:2008 (FOREIGN STANDARD)
DIN EN 12012-4:2007
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators; German version EN 12012-4:2006 (FOREIGN STANDARD)
DIN EN 12012-4/A1:2008
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators; English version EN 12012-4:2006/prA1:2008 (FOREIGN STANDARD)
DIN EN 12012-3:2001
Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders; English version of DIN EN 12012-3 (FOREIGN STANDARD)
DIN EN 12012-3/A1:2008
Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders; English version EN 12012-3:2001/prA1:2008 (FOREIGN STANDARD)
DIN EN 12012-2:2004
Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers (includes Amendment A1:2003) (FOREIGN STANDARD)
DIN EN 12012-2/A2:2008
Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers; English version EN 12012-2:2001/prA2:2008 (FOREIGN STANDARD)
DIN EN 12012-1:2007
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators; German version EN 12012-1:2007 (FOREIGN STANDARD)
DIN EN 12012-1/A1:2008
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators; English version EN 12012-1:2007/prA1:2008 (FOREIGN STANDARD)
Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives; German version EN 12003:2008 (Foreign Standard)
DIN EN 12003:2009
Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts; German version EN 12002:2008 (Foreign Standard)
DIN EN 12002:2009
DIN EN 1122:2002
Plastics - Determination of cadmium - Wet decomposition method; English version of DIN EN 1122 (FOREIGN STANDARD)
DIN EN 1114-3:2001
Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs; English version of DIN EN 1114-3 (FOREIGN STANDARD)
DIN EN 1114-2:1998
Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers (FOREIGN STANDARD)
DIN EN 1114-2/A1:2008
Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers; English version EN 1114-2:1998/prA1:2008 (FOREIGN STANDARD)
DIN EN 1114-1:1997
Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders (FOREIGN STANDARD)
Adhesives - Examination and preparation of samples for testing (FOREIGN STANDARD)
DIN EN 1067:2006
DIN EN 1013-5:2000
Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethycrylate (PMMA) sheets; English version of DIN EN 1013-5 (FOREIGN STANDARD)
DIN EN 1013-4:2000
Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets; English version of DIN EN 1013-4 (FOREIGN STANDARD)
DIN EN 1013-3:1998
Light-transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC) (FOREIGN STANDARD)
DIN EN 1013-2:1999
Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) (FOREIGN STANDARD)
DIN EN 1013-1:1998
Light-transmitting profiled plastic sheeting for single skin roofing - Part 1: General requirements and test methods (FOREIGN STANDARD)
DIN CWA 14243:2002
Post-consumer tyre materials and applications (English version CWA 14243:2002) (FOREIGN STANDARD)
DIN 7756:1979
Valves for Vehicle Tyres; Valve Screw Threads; Theoretical Values, Limiting Dimensions of Screw Threads (FOREIGN STANDARD)
Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties (FOREIGN STANDARD)
DIN 7742-2:1990
DIN 7738:1959
Laminated Products; Vulcanized Fibre, Acceptance, Test Methods (FOREIGN STANDARD)
DIN 7737:1959
Laminated Products; Vulcanized Fibre, Types (FOREIGN STANDARD)
DIN 7712:1975
Hard Rubber Sheets (FOREIGN STANDARD)
DIN 7708-4:1983
Types of plastics moulding compounds; Moulding compounds for cold moulding (FOREIGN STANDARD)
DIN 54811:1984
Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer (FOREIGN STANDARD)
Determining the absorption of hot plasticizers by polyvinyl chlorides (PVCs) using the static method (FOREIGN STANDARD)
DIN 54802-2:1997
Determining the absorption of hot plasticizers by polyvinyl chlorides (PVCs) using the planetary mixer method (FOREIGN STANDARD)
DIN 54802-1:1997
DIN 54455:1984
Testing of adhesives for metals and of bonded metal joints; torsional shear test (FOREIGN STANDARD)
Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials (FOREIGN STANDARD)
DIN 53748:1970
DIN 53742:1971
Testing of Plastics; Determination of the Vinyl Acetate Content of Copolymers of Vinyl Chloride and Vinyl Acetate; Infrared Spectrographic Method (FOREIGN STANDARD)
DIN 53741:1971
Testing of Plastics; Determination of Volatile Aromatic Hydrocarbons in Polystyrene; Gas chromatographic Method (FOREIGN STANDARD)
DIN 53733:1976
Testing of Plastics; Size Reduction of Plastic Products for Test Purposes (FOREIGN STANDARD)
DIN 53728-3:1985
Testing of plastics; determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution (FOREIGN STANDARD)
Determination of water content of plastics by the Karl Fischer method (FOREIGN STANDARD)
DIN 53715:1991
Determination of total solids content of latex (FOREIGN STANDARD)
DIN 53563:1998
Determination of low-temperature behaviour of elastomers; principles and test methods (FOREIGN STANDARD)
DIN 53545:1990
Determination of permeability of rubber to gases (FOREIGN STANDARD)
DIN 53536:1992
Determination of the adhesion of rubber to rigid materials using conical ended cylinders (FOREIGN STANDARD)
DIN 53531-2:1990
DIN 53529-2:1983
Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics (FOREIGN STANDARD)
DIN 53529-1:1983
Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles (FOREIGN STANDARD)
DIN 53523-4:1976
Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Scorching Behaviour (FOREIGN STANDARD)
DIN 53523-3:1976
Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Mooney Viscosity (FOREIGN STANDARD)
Determination of Mooney viscosity of rubber; test apparatus (FOREIGN STANDARD)
DIN 53523-2:1991
Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies (FOREIGN STANDARD)
DIN 53513:1990
Determination the rebound resilience of rubber using the Schob pendulum (FOREIGN STANDARD)
DIN 53512:2000
DIN 53509-2:1994
Resistance of rubber to ozone cracking - Reference methods for determining ozone concentration in laboratory test chambers (FOREIGN STANDARD)
Accelerated ageing of rubber (FOREIGN STANDARD)
DIN 53508:2000
DIN 53505:2000
Shore A and Shore D hardness testing of rubber (FOREIGN STANDARD)
Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values of rubber in a tensile test (FOREIGN STANDARD)
DIN 53504:1994
DIN 53498:1967
Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials (FOREIGN STANDARD)
DIN 53497:1969
Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing (FOREIGN STANDARD)
DIN 53470:1951
Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials (FOREIGN STANDARD)
DIN 53465:1963
Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials (FOREIGN STANDARD)
DIN 53464:1962
Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials (FOREIGN STANDARD)
DIN 53463:1974
Testing of Laminates; Splitting Test on Laminated Sheets (FOREIGN STANDARD)
DIN 53442:1990
Flexural fatique testing of plastics using flat specimens (FOREIGN STANDARD)
DIN 53435:1983
Testing of plastics; bending test and impact test on dynstat test pieces (FOREIGN STANDARD)
Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids (FOREIGN STANDARD)
DIN 53428:1986
DIN 53424:1978
Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load (FOREIGN STANDARD)
DIN 53408:1967
Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers (FOREIGN STANDARD)
DIN 53393:1976
Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals (FOREIGN STANDARD)
Determining the gas transmission rate of plastic film, sheeting and mouldings by the carrier gas method (FOREIGN STANDARD)
DIN 53380-3:1998
Determining the gas transmission rate of plastic film by the volumetric method (FOREIGN STANDARD)
DIN 53380-1:2000
Determining the tear resistance of plastic film and sheeting by the trouser tear method (FOREIGN STANDARD)
DIN 53363:2003
DIN 53295:1982
Testing of sandwiches; Peel test by means of a drum (FOREIGN STANDARD)
DIN 53294:1982
Testing of sandwiches; Shear test (FOREIGN STANDARD)
DIN 53293:1982
Testing of sandwiches; Bending test (FOREIGN STANDARD)
DIN 53292:1982
Testing of sandwiches; Tensile test perpendicular to the faces (FOREIGN STANDARD)
DIN 53291:1982
Testing of sandwiches; Compression test perpendicular to the faces (FOREIGN STANDARD)
DIN 40604-1:1965
Vulcanized Fibre; Panels (Sheets), Sheeting, Strips, Tapes (FOREIGN STANDARD)
DIN 18820-4:1991
Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Testing and inspection (FOREIGN STANDARD)
DIN 18820-3:1991
Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Protection of structural layer (FOREIGN STANDARD)
DIN 18820-2:1991
Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Characteristic values of standard composites (FOREIGN STANDARD)
DIN 18820-1:1991
Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Structure, fabrication and properties (FOREIGN STANDARD)
Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing (FOREIGN STANDARD)
DIN 18159-2:1978
Application of ceramic tiling by the thin bed method using epoxy resin adhesives (FOREIGN STANDARD)
DIN 18157-3:1986
DIN 16986:1987
Thermoplastics flat bars; dimensions (FOREIGN STANDARD)
DIN 16985:1989
Semi-finished thermoplastics products; technical delivery conditions (FOREIGN STANDARD)
DIN 16980:1987
Thermoplastics rods; dimensions (FOREIGN STANDARD)
Compression-moulded polyethylene (PE) sheets - Technical delivery conditions (FOREIGN STANDARD)
DIN 16972:1995
Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings (FOREIGN STANDARD)
DIN 16970:1970
Cured casting resins; types (FOREIGN STANDARD)
DIN 16946-2:1989
Cured casting resins; testing (FOREIGN STANDARD)
DIN 16946-1:1989
DIN 16945:1989
Testing of resins, hardeners and accelerators, and catalyzed resins (FOREIGN STANDARD)
DIN 16941:1986
Thermoplastics extruded profiles; general tolerances of size, form and orientation (FOREIGN STANDARD)
DIN 16901:1982
Plastics mouldings; Tolerances and acceptance conditions for linear dimensions (FOREIGN STANDARD)
DIN 16876:2000
High density polyethylene (PE-HD) pipes and fittings for buried ducting - Dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 16875:1998
Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for buried ducting - Dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 16830-2:1991
High impact white polyvinyl chloride (PVC-HI) window profiles; requirements (FOREIGN STANDARD)
DIN 16830-1:1991
High impact polyvinyl chloride (PVC-HI) window profiles; testing (FOREIGN STANDARD)
DIN 16783-2:1991
Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties (FOREIGN STANDARD)
DIN 16782-2:1991
Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties (FOREIGN STANDARD)
DIN 16782-1:1991
Polytetrafluoroethylene (PTFE) moulding materials; classification and designation (FOREIGN STANDARD)
DIN 16781-2:1989
Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties (FOREIGN STANDARD)
DIN 16780-2:1990
Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties (FOREIGN STANDARD)
Compression moulds and injection moulds; dimensional tolerances for moulding parts (FOREIGN STANDARD)
DIN 16749:1986

DIN EN 27213:1993
Pulps; sampling for testing (ISO 7213:1981) (FOREIGN STANDARD)
DIN EN 23035:1994
Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982) (FOREIGN STANDARD)
DIN EN 21974:1994
Determination of tearing resistance of paper (Elmendorf method) (ISO 1974:1990) (FOREIGN STANDARD)
DIN EN 20535:1994
Paper and board - Determination of water absorptiveness by the Cobb method (ISO 535:1991) (FOREIGN STANDARD)
DIN EN 20287:1994
Paper and board - Determination of moisture content by the oven-drying method (ISO 287:1985) (FOREIGN STANDARD)
DIN EN 20187:1993
Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) (FOREIGN STANDARD)
DIN EN 14719:2005
Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction (FOREIGN STANDARD)
DIN EN 14086:2003
Paper and board - Measurement of specular gloss - 45? gloss with a parallel beam (DIN method) (FOREIGN STANDARD)
DIN EN 12858:1999
Paper - Printing and business paper - Requirements for continuous stationery (FOREIGN STANDARD)
DIN EN 12283:2003
Printing and business paper - Determination of toner adhesion (FOREIGN STANDARD)
DIN EN 12281:2003
Printing and business paper - Requirements for copy paper for dry toner imaging processes (FOREIGN STANDARD)
DIN EN 1034-7:2005
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (FOREIGN STANDARD)
DIN EN 1034-6:2006
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (FOREIGN STANDARD)
DIN EN 1034-5:2006
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (FOREIGN STANDARD)
DIN EN 1034-4:2006
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (FOREIGN STANDARD)
DIN EN 1034-3:2000
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines; English version of DIN EN 1034-3 (FOREIGN STANDARD)
DIN EN 1034-22:2005
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders (FOREIGN STANDARD)
DIN EN 1034-2:2006
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (FOREIGN STANDARD)
DIN EN 1034-14:2006
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (FOREIGN STANDARD)
DIN EN 1034-13:2006
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (FOREIGN STANDARD)
DIN EN 1034-1:2000
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements; English version of DIN EN 1034-1 (FOREIGN STANDARD)
DIN EN 1010-5:2005
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board (FOREIGN STANDARD)
DIN 6724-2:1997
65 to 85 g/m<(hoch)2> paper for use in optical character recognition systems - Requirements and testing - Coated, treated, carbonless copy paper (FOREIGN STANDARD)
DIN 6724-1:1997
65 to 85 g/m<(hoch)2> paper for use in optical character recognition systems - Requirements and testing - Uncoated, untreated paper (FOREIGN STANDARD)
DIN 6723-2:1997
90 g/m<(hoch)2> paper for use in optical character recognition systems - Requirements and testing - Coated, treated, carbonless copy paper (FOREIGN STANDARD)
DIN 6723-1:1997
90 g/m<(hoch)2> paper for use in optical character recognition systems - Requirements and testing - Uncoated, untreated paper (FOREIGN STANDARD)
DIN 54600-8:1982
Testing of paper and board; Testing for antimicrobial additives; Determination of the methylene-bis-thioscyanate content (FOREIGN STANDARD)
DIN 54357:1978
Testing of Pulp; Determination of the Kappa Number (FOREIGN STANDARD)
DIN 53124:1998
Determining the pH of aqueous extracts of paper, board and pulp (FOREIGN STANDARD)
DIN 53120-1:1998
Determination of medium-range air permeance of paper and board by the Bendtsen method (FOREIGN STANDARD)
DIN 53118:1998
Determination of equilibrium moisture content of paper and board in a stack or in a reel (FOREIGN STANDARD)
DIN 52924-2:1999
Determination of extractable constituents of paper and board - Soluble constituents (FOREIGN STANDARD)

DIN EN 927-6:2006
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water; German version EN 927-6:2006 (FOREIGN STANDARD)
DIN EN 927-5:2007
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability; German version EN 927-5:2006 (FOREIGN STANDARD)
DIN EN 927-3:2007
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test; German version EN 927-3:2006 (FOREIGN STANDARD)
DIN EN 927-2:2006
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification; German version EN 927-2:2006 (FOREIGN STANDARD)
DIN EN 927-1:1996
Coating materials and coating systems for exterior wood surfaces - Part 1: Classification and selection (FOREIGN STANDARD)
DIN EN 29117:1992
Paints and varnishes; determination of through-dry state and through-dry time (ISO 9117:1990) (FOREIGN STANDARD)
DIN EN 23270:1991
Paints, varnishes and their raw materials; temperatures and humidities for conditioning and testing (ISO 3270:1984) (FOREIGN STANDARD)
DIN EN 1953:1998
Atomising and spraying equipment for coating materials - Safety requirements (FOREIGN STANDARD)
DIN EN 15060:2006
Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use; German version EN 15060:2006 (FOREIGN STANDARD)
DIN EN 13966-1:2003
Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels (FOREIGN STANDARD)
DIN EN 13300:2002
Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification (FOREIGN STANDARD)
DIN EN 12981:2005
Coating plants - Spray booths for application of organic powder coating material - Safety requirements (FOREIGN STANDARD)
DIN EN 12878:2006
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test; German version EN 12878:2005 + AC:2006 (FOREIGN STANDARD)
DIN EN 12757-1:2006
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (FOREIGN STANDARD)
DIN EN 12621:2006
Machinery for the supply and circulation of coating materials under pressure - Safety requirements; German version EN 12621:2006 (FOREIGN STANDARD)
DIN EN 12581:2006
Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (FOREIGN STANDARD)
DIN EN 12215:2005
Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements (FOREIGN STANDARD)
DIN EN 12206-1:2004
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder (FOREIGN STANDARD)
DIN EN 1062-7:2004
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties (FOREIGN STANDARD)
DIN EN 1062-6:2002
Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability (FOREIGN STANDARD)
DIN 55953:1981
Binders for paints and varnishes; cellulose esters of organic acids; testing (FOREIGN STANDARD)
DIN 55952:1981
Binders for paints and varnishes; cellulose ethers; testing (FOREIGN STANDARD)
DIN 55912-2:1999
Methods of analysing titanium dioxide pigments (FOREIGN STANDARD)
DIN 55908:1998
Methods of analyzing zinc oxide pigments (FOREIGN STANDARD)
DIN 55903:1999
Strontium chromate pigments - Requirements and testing (FOREIGN STANDARD)
DIN 55902:1999
Zinc chromate pigments - Requirements and testing (FOREIGN STANDARD)
DIN 55664:2007
Paints and varnishes - Visual assessment of coating defects (Foreign Standard)
DIN 55610:1986
Testing of pigments and solvent-soluble dyestuffs; determination of unsulfonated primary aromatic amines (FOREIGN STANDARD)
DIN 55609:1999
Determining water-soluble sulfates, chlorides and nitrates in pigments and fillers by ion chromatography (FOREIGN STANDARD)
DIN 55608:2000
Pigments and extenders - Determination of water absorption value (FOREIGN STANDARD)
DIN 53774-5:1986
Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; determination of thermal stability in the long-term milling test (FOREIGN STANDARD)
DIN 53774-2:1986
Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; preparation of specimens (FOREIGN STANDARD)
DIN 53215:1998
Determining of the non-volatile matter content of bituminous coating materials (FOREIGN STANDARD)
DIN 53177:2002
Determination of dynamic viscosity of liquid resins, resin solutions and oils using the Ubbelohde capillary viscometer (FOREIGN STANDARD)

DIN V 18599-6:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 6: Final energy demand of ventilation systems and air h (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN V 18599-4:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 4: Net and final energy demand for lighting (FOREIGN STANDARD)
DIN V 18599-2:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 2: Net energy demand for heating and cooling of building zones (FOREIGN STANDARD)
DIN V 18599-10:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data (FOREIGN STANDARD)
DIN SPEC 1096*DIN-Fachbericht CEN/TR 15855:2009
Construction products - Assessment of release of dangerous substances - Barriers to trade; English version CEN/TR 15855:2009 (Foreign Standard)
DIN EN 998-2:2003
Specification for mortar for masonry - Part 2: Masonry mortar (FOREIGN STANDARD)
DIN EN 998-1:2003
Specification for mortar for masonry - Part 1: Rendering and plastering mortar (FOREIGN STANDARD)
DIN EN 997:2008
WC pans and WC suites with integral trap; German version EN 997:2003+A1:2006 (FOREIGN STANDARD)
DIN EN 996:1996
Piling equipment - Safety requirements (FOREIGN STANDARD)
DIN EN 992:1995
Determination of the dry density of lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 991:1995
Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 990:2003
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 989:1995
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the 'push-out' test (FOREIGN STANDARD)
DIN EN 952:1999
Door leaves - General and local flatness - Measurement method (FOREIGN STANDARD)
DIN EN 951:1999
Door leaves - Method for measurement of height, width, thickness and squareness (FOREIGN STANDARD)
DIN EN 950:1999
Door leaves - Determination of the resistance to hard body impact (FOREIGN STANDARD)
DIN EN 949:1999
Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors (FOREIGN STANDARD)
DIN EN 948:1999
Hinged or pivoted doors - Determination of the resistance to static torsion (FOREIGN STANDARD)
DIN EN 947:1999
Hinged or pivoted doors - Determination of the resistance to vertical load (FOREIGN STANDARD)
DIN EN 934-6:2006
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity (FOREIGN STANDARD)
DIN EN 934-5:2008
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling; German version EN 934-5:2007 (FOREIGN STANDARD)
DIN EN 934-4:2002
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons; Definitions, requirements, conformity, marking and labelling; English version of DIN EN 934-4 (FOREIGN STANDARD)
DIN EN 934-4/A1:2005
Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling (FOREIGN STANDARD)
DIN EN 933-9:1998
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (FOREIGN STANDARD)
DIN EN 933-8:1999
Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test (FOREIGN STANDARD)
DIN EN 933-7:1998
Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates (FOREIGN STANDARD)
DIN EN 933-6:2002
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics; Flow coefficient of aggregates; English version of DIN EN 933-6 (FOREIGN STANDARD)
DIN EN 933-4:2008
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index; German version EN 933-4:2008 (FOREIGN STANDARD)
DIN EN 933-2:1996
Tests for geometrical properties of aggregates - Determination of particle size distribution: Test sieves and nominal aperture size (FOREIGN STANDARD)
DIN EN 933-11:2009
Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German version EN 933-11:2009 (Foreign Standard)
DIN EN 933-10:2001
Test for geometrical properties of aggregates - Part 10: Assessment of fines; Grading of fillers (air jet sieving); English version of DIN EN 933-10 (FOREIGN STANDARD)
DIN EN 933-1:2006
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method (FOREIGN STANDARD)
DIN EN 932-5:2000
Tests for general properties of aggregates - Part 5: Common equipment and calibration (FOREIGN STANDARD)
DIN EN 932-2:1999
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples (FOREIGN STANDARD)
DIN EN 932-1:1996
Tests for general properties of aggregates - Part 1: Methods for sampling (FOREIGN STANDARD)
DIN EN 846-9:2000
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; English version of DIN EN 846-9 (FOREIGN STANDARD)
DIN EN 846-8:2006
Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers; German version EN 846-8:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 846-7:2000
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections); English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 846-6:2000
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); English version of DIN EN 846-6 (FOREIGN STANDARD)
DIN EN 846-5:2000
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test); English version of DIN EN 846-5 (FOREIGN STANDARD)
DIN EN 846-4:2005
Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps (FOREIGN STANDARD)
DIN EN 846-3:2000
Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; English version of DIN EN 846-3 (FOREIGN STANDARD)
DIN EN 846-2:2000
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; English version of DIN EN 846-2 (FOREIGN STANDARD)
DIN EN 846-13:2001
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; English version of DIN EN 846-13 (FOREIGN STANDARD)
DIN EN 846-11:2000
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; English version of DIN EN 846-11 (FOREIGN STANDARD)
DIN EN 846-10:2000
Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets; English version of DIN EN 846-10 (FOREIGN STANDARD)
DIN EN 845-3:2008
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 845-2:2003
Specification for ancillary components for masonry - Part 2: Lintels (FOREIGN STANDARD)
DIN EN 845-1:2008
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets; German version EN 845-1:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 835:1995
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle (FOREIGN STANDARD)
DIN EN 834:1994
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply (FOREIGN STANDARD)
DIN EN 826:1996
Thermal insulating products for building applications - Determination of compression behaviour (FOREIGN STANDARD)
DIN EN 825:1994
Thermal insulating products for building applications - Determination of flatness (FOREIGN STANDARD)
DIN EN 824:1994
Thermal insulating products for building applications - Determination of squareness (FOREIGN STANDARD)
DIN EN 823:1994
Thermal insulating products for building applications - Determination of thickness (FOREIGN STANDARD)
DIN EN 822:1994
Thermal insulating products for building applications - Determination of length and width (FOREIGN STANDARD)
DIN EN 81-80:2004
Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts (FOREIGN STANDARD)
DIN EN 81-72:2003
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts (FOREIGN STANDARD)
DIN EN 81-71:2007
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts; German version EN 81-71+A1:2006 (FOREIGN STANDARD)
DIN EN 81-70:2005
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability (FOREIGN STANDARD)
DIN EN 817:2008
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications; German version EN 817:2008 (Foreign Standard)
DIN EN 815:1996
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock (FOREIGN STANDARD)
DIN EN 81-3:2001
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; English version of DIN EN 81-3 (FOREIGN STANDARD)
DIN EN 81-2:2000
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); English version of DIN EN 81-2:1998 + AC:1999 (FOREIGN STANDARD)
DIN EN 81-2/A2:2005
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces (FOREIGN STANDARD)
DIN EN 81-2/A1:2006
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (FOREIGN STANDARD)
DIN EN 81-1:2000
Safety rules for the construction and installation of lifts - Part 1: Electric lifts (includes Corrigendum AC:1999); English version of DIN EN 81-1:1998 + AC:1999 (FOREIGN STANDARD)
DIN EN 81-1/A2:2005
Safety rules for the construction and installation of lifts - Part 1: Electric lifts - A2: Machinery and pulley spaces (FOREIGN STANDARD)
DIN EN 81-1/A1:2006
Safety rules for the construction and installation of lifts - Part 1: Electric lifts (FOREIGN STANDARD)
DIN EN 810:1997
Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet (FOREIGN STANDARD)
DIN EN 806-3:2006
Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method; German version EN 806-3:2006 (FOREIGN STANDARD)
DIN EN 806-2:2005
Specification for installations inside buildings conveying water for human consumption - Part 2: Design (FOREIGN STANDARD)
DIN EN 806-1:2001
Specifications for installations inside buildings conveying water for human consumption - Part 1: General (includes Amendment A1:2001); English version of DIN EN 806-1:2001 + A1:2001 (FOREIGN STANDARD)
DIN EN 80:2002
Wall-hung urinals - Connecting dimensions; English version of DIN EN 80 (FOREIGN STANDARD)
DIN EN 791:1996
Safety of drill rigs (FOREIGN STANDARD)
DIN EN 779:2003
Particulate air filters for general ventilation - Requirements, testing and marking (FOREIGN STANDARD)
DIN EN 772-9:2005
Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling (FOREIGN STANDARD)
DIN EN 772-7:1998
Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water (FOREIGN STANDARD)
DIN EN 772-6:2002
Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; English version of DIN EN 772-6 (FOREIGN STANDARD)
DIN EN 772-5:2002
Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units; English version of DIN EN 772-5 (FOREIGN STANDARD)
DIN EN 772-4:1998
Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units (FOREIGN STANDARD)
DIN EN 772-3:1998
Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing (FOREIGN STANDARD)
DIN EN 772-20:2005
Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units (FOREIGN STANDARD)
DIN EN 772-2:2005
Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation) (FOREIGN STANDARD)
DIN EN 772-19:2000
Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units; English version of DIN EN 772-19 (FOREIGN STANDARD)
DIN EN 772-18:2000
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units; English version of DIN EN 772-18 (FOREIGN STANDARD)
DIN EN 772-16:2005
Methods of test for masonry units - Part 16: Determination of dimensions (FOREIGN STANDARD)
DIN EN 772-15:2000
Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; English version of DIN EN 772-15 (FOREIGN STANDARD)
DIN EN 772-14:2002
Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; English version of DIN EN 772-14 (FOREIGN STANDARD)
DIN EN 772-13:2000
Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); English version of DIN EN 772-13 (FOREIGN STANDARD)
DIN EN 772-10:1999
Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units (FOREIGN STANDARD)
DIN EN 772-1:2000
Methods of test for masonry units - Part 1: Determination of compressive strength; English version of DIN EN 772-1 (FOREIGN STANDARD)
DIN EN 771-6:2005
Specifications for masonry units - Part 6: Natural stone masonry units (FOREIGN STANDARD)
DIN EN 771-5:2005
Specification for masonry units - Part 5: Manufactured stone masonry units (FOREIGN STANDARD)
DIN EN 771-4:2005
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units (FOREIGN STANDARD)
DIN EN 771-3:2005
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) (FOREIGN STANDARD)
DIN EN 771-2:2005
Specification for masonry units - Part 2: Calcium silicate masonry units (FOREIGN STANDARD)
DIN EN 771-1:2005
Specification for masonry units - Part 1: Clay masonry units (FOREIGN STANDARD)
DIN EN 74-3:2007
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures; German version EN 74-3:2007 (FOREIGN STANDARD)
DIN EN 74-2:2009
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures; German version EN 74-2:2008 (Foreign Standard)
DIN EN 74-1:2005
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures (FOREIGN STANDARD)
DIN EN 695:2005
Kitchen sinks - Connecting dimensions (FOREIGN STANDARD)
DIN EN 680:2006
Determination of the drying shrinkage of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 679:2005
Determination of the compressive strength of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 678:1994
Determination of the dry density of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 677:1998
Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW (FOREIGN STANDARD)
DIN EN 656:2000
Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW; English version of DIN EN 656 (FOREIGN STANDARD)
DIN EN 656/A1:2006
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW; German version EN 656:1999/A1:2006 (FOREIGN STANDARD)
DIN EN 627:1995
Specification for data logging and monitoring of lifts, escalators and passenger conveyors (FOREIGN STANDARD)
DIN EN 625:1995
Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW (FOREIGN STANDARD)
DIN EN 612:2005
Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet (FOREIGN STANDARD)
DIN EN 596:1996
Test methods for timber structures - Soft body impact testing of timber framed walls (FOREIGN STANDARD)
DIN EN 595:1996
Test methods for timber structures - Testing of trusses for the determination of strength and deformation behaviour (FOREIGN STANDARD)
DIN EN 594:1996
Test methods for timber structures - Determination of racking strength and stiffness of timber frame wall panels (FOREIGN STANDARD)
DIN EN 58:2004
Bitumen and bituminous binders - Sampling bituminous binders (FOREIGN STANDARD)
DIN EN 544:2006
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods (FOREIGN STANDARD)
DIN EN 539-2 Berichtigung 1:2009
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance; German version EN 539-2:2006, Corrigendum to DIN EN 539-2:2006; German version EN 539-2:2006/AC:2008 (Foreign Standard)
DIN EN 539-2:2006
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance; German version EN 539-2:2006 (FOREIGN STANDARD)
DIN EN 539-1:2005
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test (FOREIGN STANDARD)
DIN EN 536:1999
Road construction machines - Asphalt mixing plants - Safety requirements (FOREIGN STANDARD)
DIN EN 534:2006
Corrugated bitumen sheets - Product specification and test methods; German version EN 534:2006 (FOREIGN STANDARD)
DIN EN 525:1997
Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW (FOREIGN STANDARD)
DIN EN 517:2006
Prefabricated accessories for roofing - Roof safety hooks (FOREIGN STANDARD)
DIN EN 516:2006
Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps (FOREIGN STANDARD)
DIN EN 508-3:2009
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2008 (Foreign Standard)
DIN EN 508-2:2009
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; German version EN 508-2:2008 (Foreign Standard)
DIN EN 508-1:2009
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2008 (Foreign Standard)
DIN EN 506:2009
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet; German version EN 506:2008 (Foreign Standard)
DIN EN 501:1994
Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet (FOREIGN STANDARD)
DIN EN 500-4:2007
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines; German version EN 500-4:2006 (FOREIGN STANDARD)
DIN EN 495-5:2001
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 495-5 (FOREIGN STANDARD)
DIN EN 494:2007
Fibre-cement profiled sheets and fittings - Product specification and test methods; German version EN 494:2004+A1:2005+A2:2006+A3:2007 (FOREIGN STANDARD)
DIN EN 492:2006
Fibre-cement slates and fittings - Product specification and test methods (FOREIGN STANDARD)
DIN EN 491 Berichtigung 1:2007
Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods; German version EN 491:2004, Corrigenda to DIN EN 491:2005-03 (FOREIGN STANDARD)
DIN EN 491:2005
Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods (FOREIGN STANDARD)
DIN EN 490:2006
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications; German version EN 490:2004 + A1:2006 (FOREIGN STANDARD)
DIN EN 483:2000
Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW; English version of DIN EN 483 (FOREIGN STANDARD)
DIN EN 483/A2:2002
Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW; English version of DIN EN 483:1999/A2:2001 (FOREIGN STANDARD)
DIN EN 451-2:1995
Method of testing fly ash - Determination of fineness by wet sieving (FOREIGN STANDARD)
DIN EN 450-2:2005
Fly ash for concrete - Part 2: Conformity evaluation (FOREIGN STANDARD)
DIN EN 450-1:2008
Fly ash concrete - Part 1: Definition, specifications and conformity criteria; German version EN 450-1:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 447:2008
Grout for prestressing tendons - Basic requirements; German version EN 447:2007 (FOREIGN STANDARD)
DIN EN 446:2008
Grout for prestressing tendons - Grouting procedures; German version EN 446:2007 (FOREIGN STANDARD)
DIN EN 445:2008
Grout for prestressing tendons - Test methods; German version EN 445:2007 (FOREIGN STANDARD)
DIN EN 413-2:2005
Masonry cement - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 413-1:2004
Masonry cement - Part 1: Composition, specifications and conformity criteria (FOREIGN STANDARD)
DIN EN 40-4 Berichtigung 1:2008
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005; Corrigenda to DIN EN 40-4:2006-06, German version EN 40-4:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 40-4:2006
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005 (FOREIGN STANDARD)
DIN EN 40-3-2:2002
Lighting columns - Part 3-2: Design and verification; Verification by testing (FOREIGN STANDARD)
DIN EN 40-3-1:2002
Lighting columns - Part 3-1: Design and verification; Specification for characteristic loads (FOREIGN STANDARD)
DIN EN 383:2007
Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners; German version EN 383:2007 (FOREIGN STANDARD)
DIN EN 380:1993
Timber structures; test methods; general principles for static load testing (FOREIGN STANDARD)
DIN EN 38:1992
Wall hung W.C. pan with independent water supply; connecting dimensions (FOREIGN STANDARD)
DIN EN 37:1999
Pedestal W.C. pans with independent water supply - Connecting dimensions (FOREIGN STANDARD)
DIN EN 36:1999
Wall-hung bidets with over-rim supply - Connecting dimensions (FOREIGN STANDARD)
DIN EN 35:2000
Pedestal bidets with over-rim supply - Connecting dimensions; English version of DIN EN 35 (FOREIGN STANDARD)
DIN EN 34:1992
Wall hung W.C. pan with close coupled cistern; connecting dimensions (FOREIGN STANDARD)
DIN EN 32:1999
Wall-hung wash basins - Connecting dimensions (FOREIGN STANDARD)
DIN EN 31:1999
Pedestal wash basins - Connecting dimensions (FOREIGN STANDARD)
DIN EN 303-7:2007
Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW; German version EN 303-7:2006 (FOREIGN STANDARD)
DIN EN 303-6:2000
Heating boilers - Part 6: Heating boilers with forced draught burner - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceedng 70 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 29052-1:1992
Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings (FOREIGN STANDARD)
DIN EN 29048:1991
Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987) (FOREIGN STANDARD)
DIN EN 28970:1991
Timber structures; testing of joints made with mechanical fasteners; requirements for wood density (ISO 8970:1989) (FOREIGN STANDARD)
DIN EN 28394:1991
Building construction; jointing products; determination of extrudability of one-component sealants (ISO 8394:1988) (FOREIGN STANDARD)
DIN EN 274-3:2002
Waste fittings for sanitary appliances - Part 3: Quality control; English version of DIN EN 274-3 (FOREIGN STANDARD)
DIN EN 274-2:2002
Waste fittings for sanitary appliances - Part 2: Test methods; English version of DIN EN 274-2 (FOREIGN STANDARD)
DIN EN 274-1:2002
Waste fittings for sanitary appliances - Part 1: Requirements; English version of DIN EN 274-1 (FOREIGN STANDARD)
DIN EN 26927:1991
Building construction; jointing products; sealants; vocabulary (ISO 6927:1981) (FOREIGN STANDARD)
DIN EN 26891:1991
Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983) (FOREIGN STANDARD)
DIN EN 259-2:2001
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance; English version of DIN EN 259-2 (FOREIGN STANDARD)
DIN EN 259-1:2001
Wallcoverings in roll form - Heavy duty wallcoverings - Part 1: Specifications; English version of DIN EN 259-1 (FOREIGN STANDARD)
DIN EN 248:2003
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr (FOREIGN STANDARD)
DIN EN 234:1997
Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration (includes Amendment A1:1996) (FOREIGN STANDARD)
DIN EN 233:1999
Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings (FOREIGN STANDARD)
DIN EN 215:2007
Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004+A1:2006 (FOREIGN STANDARD)
DIN EN 206-1:2001
Concrete - Part 1: Specification, performance, production and conformity; English version of DIN EN 206-1 (FOREIGN STANDARD)
DIN EN 206-1/A2:2005
Concrete - Part 1: Specification, performance, production and conformity (FOREIGN STANDARD)
DIN EN 206-1/A1:2004
Concrete - Part 1: Specification, performance, production and conformity (FOREIGN STANDARD)
DIN EN 20140-2:1993
Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data (ISO 140-2:1991) (FOREIGN STANDARD)
DIN EN 20140-10:1992
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements (FOREIGN STANDARD)
DIN EN 200:2008
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; German version EN 200:2008 (Foreign Standard)
DIN EN 1998-6:2006
Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys (FOREIGN STANDARD)
DIN EN 1998-5:2006
Eurocode 8: Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects (FOREIGN STANDARD)
DIN EN 1998-4:2007
Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines; German version EN 1998-4:2006 (FOREIGN STANDARD)
DIN EN 1998-3:2006
Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings (FOREIGN STANDARD)
DIN EN 1998-2:2006
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges; German version EN 1998-2:2005 (FOREIGN STANDARD)
DIN EN 1998-1:2006
Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings (FOREIGN STANDARD)
DIN EN 1997-2:2007
Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing; German version EN 1997-2:2007 (FOREIGN STANDARD)
DIN EN 1997-1:2008
Eurocode 7: Geotechnical design - Part 1: General rules; German version EN 1997-1:2004 (Foreign Standard)
DIN EN 1996-3:2006
Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (FOREIGN STANDARD)
DIN EN 1996-2:2006
Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (FOREIGN STANDARD)
DIN EN 1996-1-1:2006
Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (FOREIGN STANDARD)
DIN EN 1995-2:2006
Eurocode 5: Design of timber structures - Part 2: Bridges (FOREIGN STANDARD)
DIN EN 1995-1-1:2008
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings; German version EN 1995-1-1:2004+A1:2008 (Foreign Standard)
DIN EN 1994-2 Berichtigung 1:2008
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005, Corrigendum to DIN EN 1994-2:2006-07; German version EN 1994-2:2005/AC:2008 (Foreign Standard)
DIN EN 1994-2:2006
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005 (FOREIGN STANDARD)
DIN EN 1994-1-1:2006
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1994-1-1:2004 (FOREIGN STANDARD)
DIN EN 1993-5:2007
Eurocode 3: Design of steel structures - Part 5: Piling; German version EN 1993-5:2007 (FOREIGN STANDARD)
DIN EN 1993-5/NA:2008
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 5: Piling (Foreign Standard)
DIN EN 1993-3-2:2007
Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys; German version EN 1993-3-2:2006 (FOREIGN STANDARD)
DIN EN 1993-3-1:2007
Eurocode 3: Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts; German version EN 1993-3-1:2006 (FOREIGN STANDARD)
DIN EN 1993-2:2007
Eurocode 3: Design of steel structures - Part 2: Steel Bridges; German version EN 1993-2:2006 (FOREIGN STANDARD)
DIN EN 1993-1-9:2005
Eurocode 3: Design of steel structures - Part 1-9: Fatigue (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1993-1-8:2005
Eurocode 3: Design of steel structures - Part 1-8: Design of joints (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1993-1-7:2007
Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading; German version EN 1993-1-7:2007 (FOREIGN STANDARD)
DIN EN 1993-1-6:2007
Eurocode 3: Design of steel structures - Part 1-6: Strength and stability of shell structures; German version EN 1993-1-6:2007 (FOREIGN STANDARD)
DIN EN 1993-1-5:2007
Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements; German version EN 1993-1-5:2006 (FOREIGN STANDARD)
DIN EN 1993-1-4:2007
Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels; German version EN 1993-1-4:2006 (FOREIGN STANDARD)
DIN EN 1993-1-3:2007
Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting; German version EN 1993-1-3:2006 (FOREIGN STANDARD)
DIN EN 1993-1-12:2007
Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S700; German version EN 1993-1-12:2007 (FOREIGN STANDARD)
DIN EN 1993-1-11:2007
Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components; German version EN 1993-1-11:2006 (FOREIGN STANDARD)
DIN EN 1993-1-10:2005
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (FOREIGN STANDARD)
DIN EN 1993-1-1:2005
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1992-3:2006
Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures; German version EN 1992-3:2006 (FOREIGN STANDARD)
DIN EN 1992-2:2007
Eurocode 2: Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules; German version EN 1992-2:2005 (FOREIGN STANDARD)
DIN EN 1992-1-1:2005
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (FOREIGN STANDARD)
DIN EN 1991-4:2006
Eurocode 1: Actions on structures - Part 4: Silos and tanks; German version EN 1991-4:2006 (FOREIGN STANDARD)
DIN EN 1991-2:2004
Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges (FOREIGN STANDARD)
DIN EN 1991-1-7:2007
Eurocode 1: Actions on structures - Part 1-7: General actions - Accidental actions; German version EN 1991-1-7:2006 (FOREIGN STANDARD)
DIN EN 1991-1-6:2005
Eurocode 1: Actions on structures - Part 1-6: General actions, Actions during execution (FOREIGN STANDARD)
DIN EN 1991-1-5:2004
Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions (FOREIGN STANDARD)
DIN EN 1991-1-4:2005
Eurocode 1: Actions on structures - Part 1-4: General actions, Wind actions (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1991-1-3:2004
Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads (FOREIGN STANDARD)
DIN EN 1991-1-1:2002
Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight, imposed loads for buildings (FOREIGN STANDARD)
DIN EN 1990:2002
Eurocode: Basis of structural design (FOREIGN STANDARD)
DIN EN 1990/A1:2006
Eurocode: Basis of structural design; German version EN 1990:2002/A1:2005 (FOREIGN STANDARD)
DIN EN 198:2008
Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods; German version EN 198:2008 (Foreign Standard)
DIN EN 197-4:2004
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 197-2:2000
Cement - Part 2: Conformity evaluation; English version of DIN EN 197-2 (FOREIGN STANDARD)
DIN EN 197-1/A3:2007
Cement - Part 1: Composition, specifications and conformity criteria for common cements; German version EN 197-1:2000/A3:2007 (FOREIGN STANDARD)
DIN EN 196-9:2004
Methods of testing cement - Part 9: Heat of hydration; Semi-adiabatic method (FOREIGN STANDARD)
DIN EN 196-8:2004
Methods of testing cement - Part 8: Heat of hydration - Solution method (FOREIGN STANDARD)
DIN EN 196-7:2008
Methods of testing cement - Part 7: Methods of taking and preparing samples of cement; German version EN 196-7:2007 (FOREIGN STANDARD)
DIN EN 196-6:1990
Methods of testing cement; determination of fineness (FOREIGN STANDARD)
DIN EN 196-5:2005
Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement (FOREIGN STANDARD)
DIN EN 196-3:2009
Methods of testing cement - Part 3: Determination of setting times and soundness; German version EN 196-3:2005+A1:2008 (Foreign Standard)
DIN EN 196-2:2005
Methods of testing cement - Part 2: Chemical analysis of cement (FOREIGN STANDARD)
DIN EN 196-10:2006
Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement; German version EN 196-10:2006 (FOREIGN STANDARD)
DIN EN 196-1:2005
Methods of testing cement - Part 1: Determination of strength (FOREIGN STANDARD)
DIN EN 1946-5:2000
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; English version of DIN EN 1946-5 (FOREIGN STANDARD)
DIN EN 1946-4:2000
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; English version of DIN EN 1946-4 (FOREIGN STANDARD)
DIN EN 1946-3:1999
Thermal performance of building products and building components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method (FOREIGN STANDARD)
DIN EN 1946-2:1999
Thermal performance of building products and building components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method (FOREIGN STANDARD)
DIN EN 1946-1:1999
Thermal performance of building products and building components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria (FOREIGN STANDARD)
DIN EN 1937:1999
Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures (FOREIGN STANDARD)
DIN EN 1935:2002
Building hardware - Single-axis hinges - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1934:1998
Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry (FOREIGN STANDARD)
DIN EN 1933:1999
Exterior blinds - Resistance to load due to water accumulation - Test method (FOREIGN STANDARD)
DIN EN 1932:2001
External blinds and shutters - Resistance to wind loads - Method of testing; English version of DIN EN 1932 (FOREIGN STANDARD)
DIN EN 1931:2001
Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties; English version of DIN EN 1931 (FOREIGN STANDARD)
DIN EN 1928:2000
Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; English version of DIN EN 1928 (FOREIGN STANDARD)
DIN EN 1906:2002
Building hardware - Lever handles and knob furniture - Requirements and test methods; English version of DIN EN 1906 (FOREIGN STANDARD)
DIN EN 1886:2009
Ventilation for buildings - Air handling units - Mechanical performance; German version EN 1886:2007 (Foreign Standard)
DIN EN 1881:2007
Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method; German version EN 1881:2006 (FOREIGN STANDARD)
DIN EN 1877-2:2000
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1877-1:2000
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; English version of DIN EN 1877-1 (FOREIGN STANDARD)
DIN EN 1873:2006
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods (FOREIGN STANDARD)
DIN EN 1859:2006
Chimneys - Metal chimneys - Test methods; German version EN 1859:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 1859:2006
Chimneys - Metal chimneys - Test methods; German version EN 1859:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 1858:2009
Chimneys - Components - Concrete flue blocks; German version EN 1858:2008 (Foreign Standard)
DIN EN 1858:2009
Chimneys - Components - Concrete flue blocks; German version EN 1858:2008 (Foreign Standard)
DIN EN 1857:2008
Chimneys - Components - Concrete flue liners; German version EN 1857:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 1857:2008
Chimneys - Components - Concrete flue liners; German version EN 1857:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 1856-2:2004
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes (FOREIGN STANDARD)
DIN EN 1856-2:2004
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes (FOREIGN STANDARD)
DIN EN 1856-1:2006
Chimneys - Requirements for metal chimneys - Part 1: System chimney products; German version EN 1856-1:2003 + A1:2006 (FOREIGN STANDARD)
DIN EN 1856-1:2006
Chimneys - Requirements for metal chimneys - Part 1: System chimney products; German version EN 1856-1:2003 + A1:2006 (FOREIGN STANDARD)
DIN EN 1850-2:2001
Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1850-2 (FOREIGN STANDARD)
DIN EN 1850-2:2001
Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1850-2 (FOREIGN STANDARD)
DIN EN 1850-1:1999
Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1850-1:1999
Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1849-2:2001
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1849-2 (FOREIGN STANDARD)
DIN EN 1849-2:2001
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1849-2 (FOREIGN STANDARD)
DIN EN 1849-1:2000
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1849-1:2000
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1848-2:2001
Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1848-2 (FOREIGN STANDARD)
DIN EN 1848-2:2001
Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1848-2 (FOREIGN STANDARD)
DIN EN 1848-1:1999
Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1847:2001
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water; English version of DIN EN 1847 (FOREIGN STANDARD)
DIN EN 1844:2001
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1844 (FOREIGN STANDARD)
DIN EN 1838:1999
Lighting applications - Emergency lighting (FOREIGN STANDARD)
DIN EN 1806:2006
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods; German version EN 1806:2006 (FOREIGN STANDARD)
DIN EN 1775:2007
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007 (FOREIGN STANDARD)
DIN EN 1771 Berichtigung 1:2006
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test; German version EN 1771:2004, Corrigenda to DIN EN 1771:2004-11; German version EN 1771:2004/AC:2005 (Fore
DIN EN 1771:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test (FOREIGN STANDARD)
DIN EN 1770:1998
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion (FOREIGN STANDARD)
DIN EN 1767:1999
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis (FOREIGN STANDARD)
DIN EN 1766:2000
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; English version of DIN EN 1766 (FOREIGN STANDARD)
DIN EN 1751:1999
Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves (FOREIGN STANDARD)
DIN EN 1745:2002
Masonry and masonry products - Methods for determining design thermal values (FOREIGN STANDARD)
DIN EN 1744-6:2006
Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement; German version EN 1744-6:2006 (FOREIGN STANDARD)
DIN EN 1744-5:2006
Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts; German version EN 1744-5:2006 (FOREIGN STANDARD)
DIN EN 1744-4:2005
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures (FOREIGN STANDARD)
DIN EN 1744-3:2002
Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates (FOREIGN STANDARD)
DIN EN 1744-1:1998
Tests for chemical properties of aggregates - Part 1: Chemical analysis (FOREIGN STANDARD)
DIN EN 1742:1998
Determination of shear strength between different layers or multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1741:1998
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1740:1998
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) (FOREIGN STANDARD)
DIN EN 1739:2007
Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1739:2007 (FOREIGN STANDARD)
DIN EN 1738:1998
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 1737:1998
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1670 Berichtigung 1:2008
Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007, Corrigendum to DIN EN 1670:2007-06; German version EN 1670:2007/AC:2008 (Foreign Standard)
DIN EN 1670:2007
Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007 (FOREIGN STANDARD)
DIN EN 1609:2007
Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion; German version EN 1609:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1608:1997
Thermal insulating products for building applications - Determination of tensile strength parallel to faces (FOREIGN STANDARD)
DIN EN 1607:1997
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces (FOREIGN STANDARD)
DIN EN 1606:2007
Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1605:2007
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1604:2007
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1603:2007
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 ?C/ 50 % relative humidity); German version EN 1603:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1602:1997
Thermal insulating products for building applications - Determination of the apparent density (FOREIGN STANDARD)
DIN EN 15665:2009
Ventilation for buildings - Determining performance criteria for residential ventilation systems; German version EN 15665:2009 (Foreign Standard)
DIN EN 15644:2009
Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements; German version EN 15644:2008 (Foreign Standard)
DIN EN 15603:2008
Energy performance of buildings - Overall energy use and definition of energy ratings; German version EN 15603:2008 (Foreign Standard)
DIN EN 15564:2009
Precast concrete products - Resin bound concrete - Requirements and test methods; German version EN 15564:2008 (Foreign Standard)
DIN EN 15498:2008
Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance; German version EN 15498:2008 (FOREIGN STANDARD)
DIN EN 15459:2008
Energy performance of buildings - Economic evaluation procedure for energy systems in buildings; German version EN 15459:2007 (FOREIGN STANDARD)
DIN EN 15456:2008
Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements; German version EN 15456:2008 (FOREIGN STANDARD)
DIN EN 1544:2007
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars; Ge (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 15435:2008
Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance; German version EN 15435:2008 (Foreign Standard)
DIN EN 1543:1998
Products and systems for the production and repair of concrete structures - Test methods - Determination of tensile strength development for polymers (FOREIGN STANDARD)
DIN EN 15422:2008
Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes; German version EN 15422:2008 (FOREIGN STANDARD)
DIN EN 1542:1999
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off (FOREIGN STANDARD)
DIN EN 15417:2006
Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW; German version EN 15417:2006 (FOREIGN STANDARD)
DIN EN 15388:2008
Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops; German version EN 15388:2008 (FOREIGN STANDARD)
DIN EN 15377-3:2007
Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources; German version EN 15377-3:2007 (FOREIGN STANDARD)
DIN EN 15377-2:2008
Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation; German version EN 15377-2:2008 (Foreign Standard)
DIN EN 15377-1:2009
Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity; German version EN 15377-1:2008 (Foreign Standard)
DIN EN 15361:2007
Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete; German version EN 15361:2007 (FOREIGN STANDARD)
DIN EN 15332:2008
Heating boilers - Energy assessment of hot water storage systems; German version EN 15332:2007 (FOREIGN STANDARD)
DIN EN 15319:2007
General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007 (FOREIGN STANDARD)
DIN EN 15318:2008
Design and application of gypsum blocks; German version EN 15318:2007 (FOREIGN STANDARD)
DIN EN 15316-4-7:2009
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems; German version EN 15316-4-7:2008 (Foreign Standard)
DIN EN 15316-4-5:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: Space heating generation systems, the performance and quality of district heating and large volume (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 15316-4-4:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems; German version EN 15316-4-4:2007 (FOREIGN STANDARD)
DIN EN 15316-4-2:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems; Deutsche Fassung DIN EN 15316-4-2:2008-09 (Foreign Standard)
DIN EN 15316-4-1:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, combustion systems (boilers); German version EN 15316-4-1:2008 (Foreign Standard)
DIN EN 15316-3-3:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation; German version EN 15316-3-3:2007 (FOREIGN STANDARD)
DIN EN 15316-3-2:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution; German version EN 15316-3-2:2007 (Foreign Standard)
DIN EN 15316-3-1:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements); German version EN 15316-3-1:2007 (FOREIGN STANDARD)
DIN EN 15316-2-3:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems; German version EN 15316-2-3:2007 (FOREIGN STANDARD)
DIN EN 15316-2-1:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems; German version EN 15316-2-1:2007 (FOREIGN STANDARD)
DIN EN 15316-1:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General; German version EN 15316-1:2007 (FOREIGN STANDARD)
DIN EN 15304:2007
Determination of the freeze-thaw resistance of autoclaved aerated concrete; German version EN 15304:2007 (FOREIGN STANDARD)
DIN EN 1530:2000
Door leaves - General and local flatness - Tolerance classes; English version of DIN EN 1530 (FOREIGN STANDARD)
DIN EN 1529:2000
Door leaves - Height, width, thickness and squareness - Tolerance classes; English version of DIN EN 1529 (FOREIGN STANDARD)
DIN EN 15287-2:2008
Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances; German version EN 15287-2:2008 (FOREIGN STANDARD)
DIN EN 15285:2008
Agglomerated stone - Modular tiles for flooring and stairs (internal and external); German version EN 15285:2008 (Foreign Standard)
DIN EN 1527:1998
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods (FOREIGN STANDARD)
DIN EN 15258:2009
Precast concrete products - Retaining wall elements; German version EN 15258:2008 (Foreign Standard)
DIN EN 15255:2007
Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures; German version EN 15255:2007 (FOREIGN STANDARD)
DIN EN 15251:2007
Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics; German version EN 15251:2007 (FOREIGN STANDARD)
DIN EN 15243:2007
Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems; German version EN 15243:2007 (FOREIGN STANDARD)
DIN EN 15242:2007
Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration; German version EN 15242:2007 (FOREIGN STANDARD)
DIN EN 15241:2007
Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings; German version EN 15241:2007 (FOREIGN STANDARD)
DIN EN 15240:2007
Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems; German version EN 15240:2007 (FOREIGN STANDARD)
DIN EN 15239:2007
Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems; German version EN 15239:2007 (FOREIGN STANDARD)
DIN EN 15217:2007
Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings; German version EN 15217:2007 (FOREIGN STANDARD)
DIN EN 1521:1996
Determination of flexural strength of lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 15200:2007
Sanitary appliances - Multifunction shower cabinets; German version EN 15200:2007 (FOREIGN STANDARD)
DIN EN 1520:2003
Prefabricated reinforced components of lightweight aggregate concrete with open structure (includes corrigendum AC:2003) (FOREIGN STANDARD)
DIN EN 15193:2008
Energy performance of buildings - Energy requirements for lighting; German version EN 15193:2007 (FOREIGN STANDARD)
DIN EN 15184:2006
Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test); German version EN 15184:2006 (FOREIGN STANDARD)
DIN EN 15183:2006
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test; German version EN 15183:2006 (FOREIGN STANDARD)
DIN EN 15167-2:2006
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Confomity evaluation; German version EN 15167-2:2006 (FOREIGN STANDARD)
DIN EN 15167-1:2006
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria; German version EN 15167-1:2006 (FOREIGN STANDARD)
DIN EN 15161:2007
Water conditioning equipment inside buildings - Installation, operation, maintenance and repair; German version EN 15161:2006 (FOREIGN STANDARD)
DIN EN 15116:2008
Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams; German version EN 15116:2008 (FOREIGN STANDARD)
DIN EN 15102:2008
Decorative wallcoverings - Roll and panel form products; German version EN 15102:2007 (FOREIGN STANDARD)
DIN EN 15092:2008
Building valves - Inline hot water supply tempering valves - Tests and requirements; German version EN 15092:2008 (Foreign Standard)
DIN EN 15091:2007
Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2006 (FOREIGN STANDARD)
DIN EN 1507:2006
Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage; German version EN 1507:2006 (FOREIGN STANDARD)
DIN EN 1506:2007
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions; German version EN 1506:2007 (FOREIGN STANDARD)
DIN EN 15057:2006
Fibre cement profiled sheets - Impact resistance test method; German version EN 15057:2006 (FOREIGN STANDARD)
DIN EN 15050:2007
Precast concrete products - Bridge elements; German version EN 15050:2007 (FOREIGN STANDARD)
DIN EN 1505:1998
Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions (FOREIGN STANDARD)
DIN EN 1504-8:2005
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity (FOREIGN STANDARD)
DIN EN 1504-5:2005
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection (FOREIGN STANDARD)
DIN EN 1504-4:2005
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding (FOREIGN STANDARD)
DIN EN 15037-1:2008
Precast concrete products - Beam-and-block floor systems - Part 1: Beams; German version EN 15037-1:2008 (FOREIGN STANDARD)
DIN EN 15026:2007
Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation; German version EN 15026:2007 (FOREIGN STANDARD)
DIN EN 14992:2007
Precast concrete products - Wall elements; German version EN 14992:2007 (FOREIGN STANDARD)
DIN EN 14989-2:2008
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances; German version EN 14989-2:2007 (FOREIGN STANDARD)
DIN EN 14989-1:2007
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances; German version EN 14989-1:2007 (FOREIGN STANDARD)
DIN EN 14975:2007
Loft ladders - Requirements, marking and testing; German version EN 14975:2006 (FOREIGN STANDARD)
DIN EN 14964:2007
Rigid underlays for discontinuous roofing - Definitions and characteristics; German version EN 14964:2006 (FOREIGN STANDARD)
DIN EN 1491:2000
Building valves - Expansions valves - Tests and requirements; English version of DIN EN 1491 (FOREIGN STANDARD)
DIN EN 1490:2000
Building valves - Combined temperature and pressure relief valves - Tests and requirements; English version of DIN EN 1490 (FOREIGN STANDARD)
DIN EN 14895:2006
Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders; German version EN 14895:2006 (FOREIGN STANDARD)
DIN EN 14891 Berichtigung 2:2008
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2007, Corrigendum to DIN EN 14891:2007-11; Germa
DIN EN 1489:2000
Building valves - Pressure safety valves - Tests and requirements; English version of DIN EN 1489 (FOREIGN STANDARD)
DIN EN 14889-2:2006
Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity; German version EN 14889-2:2006 (FOREIGN STANDARD)
DIN EN 14889-1:2006
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity; German version EN 14889-1:2006 (FOREIGN STANDARD)
DIN EN 1488:2000
Building valves - Expansion groups - Tests and requirements; English version of DIN EN 1488 (FOREIGN STANDARD)
DIN EN 1487:2000
Building valves - Hydraulic safety groups - Tests and requirements; English version of DIN EN 1487 (FOREIGN STANDARD)
DIN EN 14846:2008
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods; German version EN 14846:2008 (Foreign Standard)
DIN EN 14845-2:2006
Test methods for fibres in concrete - Part 2: Effect on concrete; German version EN 14845-2:2006 (FOREIGN STANDARD)
DIN EN 14845-1:2007
Test methods for fibres in concrete - Part 1: Reference concretes; German version EN 14845-1:2007 (FOREIGN STANDARD)
DIN EN 14844:2009
Precast concrete products - Box culverts; German version EN 14844:2006+A1:2008 (Foreign Standard)
DIN EN 14843:2007
Precast concrete products - Stairs; German version EN 14843:2007 (FOREIGN STANDARD)
DIN EN 14759:2005
Shutters - Acoustic insulation relative to airborne sound - Expression of performance (FOREIGN STANDARD)
DIN EN 14721:2007
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete; German version EN 14721:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14716:2005
Stretched ceilings - Requirements and tests methods (FOREIGN STANDARD)
DIN EN 14707:2008
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation; German version EN 14707:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14706:2006
Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature (FOREIGN STANDARD)
DIN EN 14694:2005
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment (FOREIGN STANDARD)
DIN EN 14693:2006
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt; Ge (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 14692:2005
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer (FOREIGN STANDARD)
DIN EN 14691:2005
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning (FOREIGN STANDARD)
DIN EN 1469:2005
Natural stone products - Slabs for cladding - Requirements (FOREIGN STANDARD)
DIN EN 14688:2007
Sanitary appliances - Wash basins - Functional requirements and test methods; German version EN 14688:2006 (FOREIGN STANDARD)
DIN EN 14651:2007
Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual); German version EN 14651:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14650:2005
Precast concrete products - General rules for factory production control of metallic fibered concrete (FOREIGN STANDARD)
DIN EN 14649:2005
Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14648:2007
Building hardware - Fittings for shutters - Requirements and test methods; German version EN 14648:2007 (FOREIGN STANDARD)
DIN EN 14647 Berichtigung 1:2007
Calcium aluminate cement - Composition, specifications and conformity criteria; German version EN 14647:2005, Corrigenda to DIN EN 14647:2006-01; German version EN 14647:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 14647:2006
Calcium aluminate cement - Composition, specifications and conformity criteria (FOREIGN STANDARD)
DIN EN 14637:2008
Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance; German version EN 14637:2007 (FOREIGN STANDARD)
DIN EN 14630:2007
Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method; German version EN 14630:2006 (FOREIGN STANDARD)
DIN EN 14629:2007
Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete; German version EN 14629:2007 (FOREIGN STANDARD)
DIN EN 1462:2004
Brackets for eaves gutters - Requirements and testing (FOREIGN STANDARD)
DIN EN 14618:2005
Agglomerated stone - Terminology and classification (FOREIGN STANDARD)
DIN EN 14617-9:2005
Agglomerated stone - Test methods - Part 9: Determination of impact resistance (FOREIGN STANDARD)
DIN EN 14617-8:2008
Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole); German version EN 14617-8:2007 (FOREIGN STANDARD)
DIN EN 14617-6:2005
Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance (FOREIGN STANDARD)
DIN EN 14617-5:2005
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance (FOREIGN STANDARD)
DIN EN 14617-4:2005
Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance (FOREIGN STANDARD)
DIN EN 14617-2:2008
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2008 (Foreign Standard)
DIN EN 14617-16:2005
Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles (FOREIGN STANDARD)
DIN EN 14617-15:2005
Agglomerated stone - Test methods - Part 15: Determination of compressive strength (FOREIGN STANDARD)
DIN EN 14617-13:2005
Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity (FOREIGN STANDARD)
DIN EN 14617-12:2005
Agglomerated stone - Test methods - Part 12: Determination of dimensional stability (FOREIGN STANDARD)
DIN EN 14617-11:2005
Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient (FOREIGN STANDARD)
DIN EN 14617-10:2005
Agglomerated stone - Test methods - Part 10: Determination of chemical resistance (FOREIGN STANDARD)
DIN EN 14617-1:2005
Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption (FOREIGN STANDARD)
DIN EN 14609:2004
Windows - Determination of the resistance to static torsion (FOREIGN STANDARD)
DIN EN 14608:2004
Windows - Determination of the resistance to racking (FOREIGN STANDARD)
DIN EN 14600:2006
Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification (FOREIGN STANDARD)
DIN EN 14528:2007
Bidets - Functional requirements and test methods; German version EN 14528:2007 (FOREIGN STANDARD)
DIN EN 14527:2006
Shower trays for domestic purposes; German version EN 14527:2006 (FOREIGN STANDARD)
DIN EN 14518:2005
Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams (FOREIGN STANDARD)
DIN EN 14516:2006
Baths for domestic purposes; German version EN 14516:2006 (FOREIGN STANDARD)
DIN EN 14511-4:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements; German version EN 14511-4:2007 (FOREIGN STANDARD)
DIN EN 14511-3 Berichtigung 1:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods; German version EN 14511-3:2007, Corrigendum to DIN EN 14511-3:2008-02; German version EN 14511-3:2007/AC:2
DIN EN 14511-3:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods; German version EN 14511-3:2007 (FOREIGN STANDARD)
DIN EN 14511-2:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions; German version EN 14511-2:2007 (FOREIGN STANDARD)
DIN EN 14509:2007
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications; German version EN 14509:2006 (FOREIGN STANDARD)
DIN EN 14501:2006
Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification (FOREIGN STANDARD)
DIN EN 14500:2008
Blinds and shutters - Thermal and visual comfort - Test and calculation methods; German version EN 14500:2008 (FOREIGN STANDARD)
DIN EN 14498:2004
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles (FOREIGN STANDARD)
DIN EN 14497:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability (FOREIGN STANDARD)
DIN EN 14496:2006
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 14488-7:2006
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete; German version EN 14488-7:2006 (FOREIGN STANDARD)
DIN EN 14488-6:2006
Testing sprayed concrete - Part 6: Thickness of concrete on a substrate; German version EN 14488-6:2006 (FOREIGN STANDARD)
DIN EN 14488-5:2006
Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens; German version EN 14488-5:2006 (FOREIGN STANDARD)
DIN EN 14488-4:2008
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005+A1:2008 (FOREIGN STANDARD)
DIN EN 14488-3:2006
Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 (FOREIGN STANDARD)
DIN EN 14488-2:2006
Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete; German version EN 14488-2:2006 (FOREIGN STANDARD)
DIN EN 14488-1:2005
Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete (FOREIGN STANDARD)
DIN EN 14487-2:2007
Sprayed concrete - Part 2: Execution; German version EN 14487-2:2006 (FOREIGN STANDARD)
DIN EN 14474:2005
Precast concrete products - Concrete with woodchips as aggregate - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14471:2005
Chimneys - System chimneys with plastic flue liners - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14459 Berichtigung 1:2009
Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment; German version EN 14459:2007, Corrigendum to DIN EN 14459:2008-02; German version EN 14459:2007/AC:2008 (Foreign Standard)
DIN EN 14459:2008
Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment; German version EN 14459:2007 (FOREIGN STANDARD)
DIN EN 14437:2005
Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method (FOREIGN STANDARD)
DIN EN 14411:2007
Ceramic tiles - Definitions, classification, characteristics and marking; German version EN 14411:2006 (FOREIGN STANDARD)
DIN EN 14406:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution (FOREIGN STANDARD)
DIN EN 14394:2008
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 ?C; German version EN 14394:2005+A1:2008 (Foreign Standard)
DIN EN 14367:2005
Non controllable backflow preventer with different pressure zones - Family C, type A (FOREIGN STANDARD)
DIN EN 14353:2008
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods; German version EN 14353:2007 (FOREIGN STANDARD)
DIN EN 14351-1:2006
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics; German version EN 14351-1:2006 (FOREIGN STANDARD)
DIN EN 14337:2006
Heating systems in buildings - Design and installation of direct electrical room heating systems (FOREIGN STANDARD)
DIN EN 14336:2005
Heating systems in buildings - Installation and commissioning of water based heating systems (FOREIGN STANDARD)
DIN EN 14317-2:2007
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; German version EN 14317-2:2007 (FOREIGN STANDARD)
DIN EN 14317-1:2004
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation (FOREIGN STANDARD)
DIN EN 14316-2:2007
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products; German version EN 14316-2:2007 (FOREIGN STANDARD)
DIN EN 14316-1:2004
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation (FOREIGN STANDARD)
DIN EN 14297:2004
Chimneys - Freeze-thaw resistance test method for chimney products (FOREIGN STANDARD)
DIN EN 14296:2005
Sanitary appliances - Communal washing troughs (FOREIGN STANDARD)
DIN EN 14277:2006
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes; German version EN 14277:2006 (FOREIGN STANDARD)
DIN EN 14250:2005
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners (FOREIGN STANDARD)
DIN EN 14240:2004
Ventilation for buildings - Chilled ceilings - Testing and rating (FOREIGN STANDARD)
DIN EN 14239:2004
Ventilation for buildings - Ductwork - Measurement of ductwork surface area (FOREIGN STANDARD)
DIN EN 14236:2008
Ultrasonic domestic gas meters; German version EN 14236:2007 (FOREIGN STANDARD)
DIN EN 14224:2006
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability (FOREIGN STANDARD)
DIN EN 14223:2006
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption (FOREIGN STANDARD)
DIN EN 14216:2004
Cement - Composition, specifications and conformity criteria for very low heat special cements (FOREIGN STANDARD)
DIN EN 14209:2006
Preformed plasterboard cornices - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 14203:2004
Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14202:2004
Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14201:2004
Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing (FOREIGN STANDARD)
DIN EN 14154-3:2007
Water meters - Part 3: Test methods and equipment; German version EN 14154-3:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14154-2:2007
Water meters - Part 2: Installation and conditions of use; German version EN 14154-2:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14154-1:2007
Water meters - Part 1: General requirements; German version EN 14154-1:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14134:2004
Ventilation for buildings - Performance testing and installation checks of residential ventilation systems (FOREIGN STANDARD)
DIN EN 14124:2005
Inlet valves for flushing cisterns with internal overflow (FOREIGN STANDARD)
DIN EN 14117:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products (FOREIGN STANDARD)
DIN EN 14114:2002
Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems (FOREIGN STANDARD)
DIN EN 14068:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of water tightness of injected cracks without movement in concrete (FOREIGN STANDARD)
DIN EN 14063-1:2004
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation (FOREIGN STANDARD)
DIN EN 14037-3:2003
Ceiling-mounted radiant panels supplied with water at a temperature below 120 ?C - Part 3: Rating method and evaluation radiant thermal output (FOREIGN STANDARD)
DIN EN 14037-2:2003
Ceiling-mounted radiant panels supplied with water at a temperature below 120 ?C - Part 2: Test method for thermal output (FOREIGN STANDARD)
DIN EN 14024:2005
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment (FOREIGN STANDARD)
DIN EN 14019:2004
Curtain Walling - Impact resistance - Performance requirements (FOREIGN STANDARD)
DIN EN 14016-2:2004
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13978-1:2005
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions (FOREIGN STANDARD)
DIN EN 13964:2007
Suspended ceilings - Requirements and test methods; German version EN 13964:2004 + A1:2006 (FOREIGN STANDARD)
DIN EN 13963 Berichtigung 1:2006
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods; German version EN 13963:2005, Corrigenda to DIN EN 13963:2005-08; German version EN 13963:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 13963:2005
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 13950:2006
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 13948:2008
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration; German version EN 13948:2007 (FOREIGN STANDARD)
DIN EN 13947:2007
Thermal performance of curtain walling - Calculation of thermal transmittance; German version EN 13947:2006 (FOREIGN STANDARD)
DIN EN 13941:2009
Design and installation of preinsulated bonded pipe systems for district heating; German and English version prEN 13941:2009 (Foreign Standard)
DIN EN 13941:2003
Design and installation of preinsulated bonded pipe systems for district heating (FOREIGN STANDARD)
DIN EN 13914-2:2005
Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13914-1:2005
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering (FOREIGN STANDARD)
DIN EN 13897:2005
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature (FOREIGN STANDARD)
DIN EN 13894-2:2003
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 2: After hardening (FOREIGN STANDARD)
DIN EN 13894-1:2004
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 1: During cure (FOREIGN STANDARD)
DIN EN 13892-8:2003
Methods of test for screed materials - Part 8: Determination of bond strength (FOREIGN STANDARD)
DIN EN 13892-7:2003
Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings (FOREIGN STANDARD)
DIN EN 13892-6:2003
Methods of test for screed materials - Part 6: Determination of surface hardness (FOREIGN STANDARD)
DIN EN 13892-5:2003
Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer (FOREIGN STANDARD)
DIN EN 13892-4:2003
Methods of test for screed materials - Part 4: Determination of wear resistance-BCA (FOREIGN STANDARD)
DIN EN 13892-3:2004
Methods of test for screed materials - Part 3: Determination of wear resistance (Boehme) (FOREIGN STANDARD)
DIN EN 13892-2:2003
Methods of test for screed materials - Part 2: Determination of flexural and compressive strength (FOREIGN STANDARD)
DIN EN 13892-1:2003
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for testing (FOREIGN STANDARD)
DIN EN 13872 Berichtigung 1:2004
Corrigenda to DIN EN 13872:2004-04 (FOREIGN STANDARD)
DIN EN 13872:2004
Method of test for smoothing and/or levelling compounds - Determination of shrinkage (FOREIGN STANDARD)
DIN EN 13862:2002
Floor cutting-off machines - Safety; English version of DIN EN 13862 (FOREIGN STANDARD)
DIN EN 13859-2:2009
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls; German version EN 13859-2:2004+A1:2008 (Foreign Standard)
DIN EN 13859-1:2009
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing; German version EN 13859-1:2005+A1:2008 (Foreign Standard)
DIN EN 13836:2007
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW; German version EN 13836:2006 (FOREIGN STANDARD)
DIN EN 13831:2007
Closed expansion vessels with built in diaphragm for installation in water; German version EN 13831:2007 (FOREIGN STANDARD)
DIN EN 13830:2003
Curtain walling - Product standard (FOREIGN STANDARD)
DIN EN 1383:2000
Timber structures - Test methods - Pull-through resistance of timber fasteners; English version of DIN EN 1383 (FOREIGN STANDARD)
DIN EN 13829:2001
Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified); English version of DIN EN 13829 (FOREIGN STANDARD)
DIN EN 13820:2003
Thermal insulating materials for building applications - Determination of organic content (FOREIGN STANDARD)
DIN EN 1382:2000
Timber structures - Test methods - Withdrawal capacity of timber fasteners; English version of DIN EN 1382 (FOREIGN STANDARD)
DIN EN 13815:2006
Fibrous gypsum plaster casts - Definitions, requirements and test methods; German version EN 13815:2006 (FOREIGN STANDARD)
DIN EN 13814:2005
Fairground and amusement park machinery and structures - Safety (FOREIGN STANDARD)
DIN EN 13813:2003
Screed material and floor screeds - Screed materials - Properties and requirements (FOREIGN STANDARD)
DIN EN 1381:2000
Timber structures - Test methods - Loadbearing stapled joints; English version of DIN EN 1381 (FOREIGN STANDARD)
DIN EN 13808:2005
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1380:2009
Timber structures - Test methods - Load bearing nails, screws, dowels and bolts; German version EN 1380:2009 (Foreign Standard)
DIN EN 13793:2003
Thermal insulating products for building applications - Determination of behaviour under cyclic loading (FOREIGN STANDARD)
DIN EN 13791:2008
Assessment of in-situ compressive strength in structures and precast concrete components; German version EN 13791:2007 (FOREIGN STANDARD)
DIN EN 13782:2006
Temporary structures - Tents - Safety; German version EN 13782:2005 (FOREIGN STANDARD)
DIN EN 13779:2007
Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems; German version EN 13779:2007 (FOREIGN STANDARD)
DIN EN 13748-2:2005
Terrazzo tiles - Part 2: Terrazzo tiles for external use (FOREIGN STANDARD)
DIN EN 13748-1:2005
Terrazzo tiles - Part 1: Terrazzo tiles for internal use (FOREIGN STANDARD)
DIN EN 13747:2009
Precast concrete products - Floor plates for floor systems; German version EN 13747:2005+A1:2008 (Foreign Standard)
DIN EN 13703:2004
Bitumen and bituminous binders - Determination of deformation energy (FOREIGN STANDARD)
DIN EN 13702-2:2004
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method (FOREIGN STANDARD)
DIN EN 13702-1:2004
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 1: Cone and plate method (FOREIGN STANDARD)
DIN EN 13693:2004
Precast concrete products - Special roof elements (FOREIGN STANDARD)
DIN EN 13687-5:2002
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock (FOREIGN STANDARD)
DIN EN 13687-4:2002
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling (FOREIGN STANDARD)
DIN EN 13687-3:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact (FOREIGN STANDARD)
DIN EN 13687-2:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) (FOREIGN STANDARD)
DIN EN 13687-1:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion (FOREIGN STANDARD)
DIN EN 1367-6:2008
Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl); German version EN 1367-6:2008 (Foreign Standard)
DIN EN 1367-5:2002
Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock (FOREIGN STANDARD)
DIN EN 1367-4:2008
Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:2008 (FOREIGN STANDARD)
DIN EN 1367-3:2001
Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for "Sonnenbrand basalt"; English version of DIN EN 1367-3 (FOREIGN STANDARD)
DIN EN 1367-2:1998
Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test (FOREIGN STANDARD)
DIN EN 1367-1:2007
Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing; German version EN 1367-1:2007 (FOREIGN STANDARD)
DIN EN 13659:2009
Shutters - Performance requirements including safety; German version EN 13659:2004+A1:2008 (Foreign Standard)
DIN EN 13653:2004
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength (FOREIGN STANDARD)
DIN EN 13639 Berichtigung 1:2006
Determination of total organic carbon in limestone; German version EN 13639:2002, Corrigenda to DIN EN 13639:2002-07; German version EN 13639:2002/AC:2004 (FOREIGN STANDARD)
DIN EN 13639:2002
Determination of total organic carbon in limestone (FOREIGN STANDARD)
DIN EN 1359:2007
Gas meters - Diaphragm meters; German version EN 1359:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 13589:2008
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method; German version EN 13589:2008 (FOREIGN STANDARD)
DIN EN 13588:2008
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test; German version EN 13588:2008 (Foreign Standard)
DIN EN 13584:2003
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products (FOREIGN STANDARD)
DIN EN 13583:2001
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance; English version of DIN EN 13583 (FOREIGN STANDARD)
DIN EN 13581:2002
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress (FOREIGN STANDARD)
DIN EN 13580:2002
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations (FOREIGN STANDARD)
DIN EN 13579:2002
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation (FOREIGN STANDARD)
DIN EN 13578:2004
Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete (FOREIGN STANDARD)
DIN EN 13564-3:2004
Anti-flooding devices for buildings - Part 3: Quality assurance (FOREIGN STANDARD)
DIN EN 13564-2:2003
Anti-flooding devices for buildings - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13564-1:2002
Anti-flooding devices for buildings - Part 1: Requirements (FOREIGN STANDARD)
DIN EN 13561:2009
External blinds - Performance requirements including safety; German version EN 13561:2004+A1:2008 (Foreign Standard)
DIN EN 1356:1997
Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load (FOREIGN STANDARD)
DIN EN 13559:2003
Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes (FOREIGN STANDARD)
DIN EN 13558:2003
Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes (FOREIGN STANDARD)
DIN EN 1355:1997
Determination of creep strain under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1354:2005
Determination of compressive strength of lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1353:1997
Determination of moisture content of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 13529:2003
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack (FOREIGN STANDARD)
DIN EN 13527:2001
Shutters and blinds - Measurement of operating force - Test methods; English version of DIN EN 13527 (FOREIGN STANDARD)
DIN EN 1352:1997
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1351:1997
Determination of flexural strength of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 13502:2003
Chimneys - Requirements and test methods for clay/ceramic flue terminals (FOREIGN STANDARD)
DIN EN 13500:2003
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification (FOREIGN STANDARD)
DIN EN 13499:2003
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification (FOREIGN STANDARD)
DIN EN 13498:2003
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) (FOREIGN STANDARD)
DIN EN 13497:2003
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) (FOREIGN STANDARD)
DIN EN 13496:2003
Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes (FOREIGN STANDARD)
DIN EN 13495:2003
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) (FOREIGN STANDARD)
DIN EN 13494:2003
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material (FOREIGN STANDARD)
DIN EN 13472:2001
Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation; English version of DIN EN 13472 (FOREIGN STANDARD)
DIN EN 13471:2001
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; GEnglish version of DIN EN 13471 (FOREIGN STANDARD)
DIN EN 13470:2001
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; English version of DIN EN 13470 (FOREIGN STANDARD)
DIN EN 13469:2001
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation; English version of DIN EN 13469 (FOREIGN STANDARD)
DIN EN 13468:2001
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, and sodium ions and pH; English version of DIN EN 13468 (FOREIGN STANDARD)
DIN EN 13467:2001
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation; English version of DIN EN 13467 (FOREIGN STANDARD)
DIN EN 13465:2004
Ventilation for buildings - Calculation methods for the determination of air flow rates in dwellings (FOREIGN STANDARD)
DIN EN 13454-2:2007
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods; German version EN 13454-2:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 13450 Berichtigung 1:2004
Corrigenda to DIN EN 13450:2003-06 (FOREIGN STANDARD)
DIN EN 13450:2003
Aggregates for railway ballast (FOREIGN STANDARD)
DIN EN 13416:2001
Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling; English version of DIN EN 13416 (FOREIGN STANDARD)
DIN EN 13412:2006
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression; German version EN 13412:2006 (FOREIGN STANDARD)
DIN EN 13410:2002
Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises; English version of DIN EN 13410 (FOREIGN STANDARD)
DIN EN 13409:2002
Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time (FOREIGN STANDARD)
DIN EN 13408:2002
Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength (FOREIGN STANDARD)
DIN EN 13407:2006
Wall-hung urinals - Functional requirements and test methods; German version EN 13407:2006 (FOREIGN STANDARD)
DIN EN 13403:2003
Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards (FOREIGN STANDARD)
DIN EN 13395-4:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead (FOREIGN STANDARD)
DIN EN 13395-3:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete (FOREIGN STANDARD)
DIN EN 13395-2:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar (FOREIGN STANDARD)
DIN EN 13395-1:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars (FOREIGN STANDARD)
DIN EN 13391:2004
Mechanical tests for post-tensioning systems (FOREIGN STANDARD)
DIN EN 13384-3:2006
Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance (FOREIGN STANDARD)
DIN EN 13384-2:2009
Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance; German version EN 13384-2:2003+A1:2009 (Foreign Standard)
DIN EN 13384-1:2008
Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance; German version EN 13384-1:2002+A2:2008 (FOREIGN STANDARD)
DIN EN 13383-2:2002
Armourstone - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13383-1 Berichtigung 1:2004
Corrigenda to DIN EN 13383-1:2002-08 (FOREIGN STANDARD)
DIN EN 13383-1:2002
Armourstone - Part 1: Specification (FOREIGN STANDARD)
DIN EN 1337-9:1998
Structural bearings - Part 9: Protection (FOREIGN STANDARD)
DIN EN 1337-8:2008
Structural bearings - Part 8: Guide Bearings and Restraint Bearings; German version EN 1337-8:2007 (FOREIGN STANDARD)
DIN EN 13377:2002
Prefabricated timber formwork beams - Requirements, classification and assessment (FOREIGN STANDARD)
DIN EN 1337-6:2004
Structural bearings - Part 6: Rocker bearings (FOREIGN STANDARD)
DIN EN 1337-5:2005
Structural bearings - Part 5: Pot bearings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13375:2004
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation (FOREIGN STANDARD)
DIN EN 1337-4 Berichtigung 1:2007
Structural bearings - Part 4: Roller bearings; German version EN 1337-4:2004, Corrigenda to DIN EN 1337-4:2004-08; German version EN 1337-4:2004/AC:2007 (FOREIGN STANDARD)
DIN EN 1337-4:2004
Structural bearings - Part 4: Roller bearings (FOREIGN STANDARD)
DIN EN 1337-3:2005
Structural bearings - Part 3: Elastomeric bearings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1337-11:1998
Structural bearings - Part 11: Transport, storage and installation (FOREIGN STANDARD)
DIN EN 1337-10:2003
Structural bearings - Part 10: Inspection and maintenance (FOREIGN STANDARD)
DIN EN 1337-1:2001
Structural bearings - Part 1: General design rules; English version of DIN EN 1337-1 (FOREIGN STANDARD)
DIN EN 13369 Berichtigung 1:2007
Common rules for precast concrete products; German version EN 13369:2004, Corigenda to DIN EN 13369:2004-09; German version EN 13369:2004/AC:2006 (FOREIGN STANDARD)
DIN EN 13369/A1:2006
Common rules for precast concrete products; German version EN 13369:2004/A1:2006 (FOREIGN STANDARD)
DIN EN 13330:2003
Shutters - Hard body impact - Test method (FOREIGN STANDARD)
DIN EN 13310:2003
Kitchen sinks - Functional requirements and test methods (FOREIGN STANDARD)
DIN EN 13302:2003
Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus (FOREIGN STANDARD)
DIN EN 13295:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation (FOREIGN STANDARD)
DIN EN 13294:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time (FOREIGN STANDARD)
DIN EN 13279-2:2004
Gypsum binders and gypsum plasters - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13264:2001
Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification; English version of DIN EN 13264 (FOREIGN STANDARD)
DIN EN 13263-2:2009
Silica fume for concrete - Part 2: Conformity evaluation; German version EN 13263-2:2005+A1:2009 (Foreign Standard)
DIN EN 13263-1:2009
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria; German version EN 13263-1:2005+A1:2009 (Foreign Standard)
DIN EN 13241-1:2004
Industrial, commercial and garage doors and gates - Product Standard - Part 1: Products without fire resistance or smoke control characteristics (FOREIGN STANDARD)
DIN EN 13225:2004
Precast concrete products - Linear structural elements (FOREIGN STANDARD)
DIN EN 13224:2007
Precast concrete products - Ribbed floor elements; German version EN 13224:2004+A1:2007 (FOREIGN STANDARD)
DIN EN 13216-1:2004
Chimneys - Test methods for system chimneys - Part 1: General test methods (FOREIGN STANDARD)
DIN EN 13213:2001
Hollow floors; English version of DIN EN 13213 (FOREIGN STANDARD)
DIN EN 13203-2:2006
Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption; German version EN 13203-2:2006 (FOREIGN STANDARD)
DIN EN 13203-1:2006
Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries; German version EN 13203-1:2006 (FOREIGN STANDARD)
DIN EN 13200-4:2006
Spectator facilities - Part 4: Seats - Product characteristics; German version EN 13200-4:2006 (FOREIGN STANDARD)
DIN EN 13200-3:2006
Spectator facilities - Part 3: Separating elements - Requirements (FOREIGN STANDARD)
DIN EN 13200-1:2004
Spectator facilities - Part 1: Layout criteria for spectator viewing area - Specification (FOREIGN STANDARD)
DIN EN 13198:2003
Precast concrete products - Street furniture and garden products (FOREIGN STANDARD)
DIN EN 13187:1999
Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified) (FOREIGN STANDARD)
DIN EN 13180:2002
Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; English version of DIN EN 13180 (FOREIGN STANDARD)
DIN EN 13172:2008
Thermal insulating products - Evaluation of conformity; German version EN 13172:2008 (FOREIGN STANDARD)
DIN EN 13171:2009
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2008 (Foreign Standard)
DIN EN 13170:2009
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2008 (Foreign Standard)
DIN EN 13169:2009
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2008 (Foreign Standard)
DIN EN 13168:2009
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2008 (Foreign Standard)
DIN EN 13167:2009
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2008 (Foreign Standard)
DIN EN 13166:2009
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2008 (Foreign Standard)
DIN EN 13165:2009
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; German version EN 13165:2008 (Foreign Standard)
DIN EN 13164:2009
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2008 (Foreign Standard)
DIN EN 13163:2009
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 13163:2008 (Foreign Standard)
DIN EN 13162:2009
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification; German version EN 13162:2008 (Foreign Standard)
DIN EN 13142:2004
Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics (FOREIGN STANDARD)
DIN EN 13141-9:2008
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 9: Externally mounted humidity controlled air transfer device; German version EN 13141-9:2008 (Foreign Standard)
DIN EN 13141-8:2006
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) fo (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13141-7:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of mechanical supply and exhaust ventilation units (including heat recovery) for mechanic (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13141-6:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling (FOREIGN STANDARD)
DIN EN 13141-5:2005
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices (FOREIGN STANDARD)
DIN EN 13141-3:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use (FOREIGN STANDARD)
DIN EN 13141-2:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices (FOREIGN STANDARD)
DIN EN 13141-10:2008
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 10: Humidity controlled extract air terminal device; German version EN 13141-10:2008 (Foreign Standard)
DIN EN 13141-1:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices (FOREIGN STANDARD)
DIN EN 13139 Berichtigung 1:2004
Corrigenda to DIN EN 13139:2002-08 (FOREIGN STANDARD)
DIN EN 13139:2002
Aggregates for mortar (FOREIGN STANDARD)
DIN EN 13126-8:2006
Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt & Turn, Tilt-First and Turn-Only hardware; German version EN 13126-8:2006 (FOREIGN STANDARD)
DIN EN 13126-7:2007
Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches; German version EN 13126-7:2007 (FOREIGN STANDARD)
DIN EN 13126-6:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay); German version EN 13126-6:2008 (Foreign Standard)
DIN EN 13126-4:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes; German version EN 13126-4:2008 (Foreign Standard)
DIN EN 13126-12:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware; German version EN 13126-12:2008 (Foreign Standard)
DIN EN 13126-11:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware; German version EN 13126-11:2008 (Foreign Standard)
DIN EN 13126-10:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems; German version EN 13126-10:2008 (Foreign Standard)
DIN EN 13126-1:2006
Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware; German version EN 13126-1:2006 (FOREIGN STANDARD)
DIN EN 13125:2001
Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product; English version of DIN EN 13125 (FOREIGN STANDARD)
DIN EN 13120:2009
Internal blinds - Performance requirements including safety; German version EN 13120:2009 (Foreign Standard)
DIN EN 13116:2001
Curtain walling - Resistance to wind load - Performance requirements; English version of DIN EN 13116 (FOREIGN STANDARD)
DIN EN 13115:2001
Windows - Classification of mechanical properties - Racking, torsion and operating forces; English version of DIN EN 13115 (FOREIGN STANDARD)
DIN EN 13111:2001
Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration; English version of DIN EN 13111 (FOREIGN STANDARD)
DIN EN 13108-21 Berichtigung 1:2009
Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2006, Corrigendum to DIN EN 13108-21:2006-07; German version EN 13108-21:2006/AC:2008 (Foreign Standard)
DIN EN 13108-21:2006
Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2006 (FOREIGN STANDARD)
DIN EN 13084-8:2005
Free-standing industrial chimneys - Part 8: Design and execution of mast construction with satellite components (FOREIGN STANDARD)
DIN EN 13084-7 Berichtigung 1:2008
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners; German version EN 13084-7:2005, Corrigendum to DIN EN 13084-7:2006-06; German version EN 13084-7:2005/AC:2008
DIN EN 13084-7:2006
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners; German version EN 13084-7:2005 (FOREIGN STANDARD)
DIN EN 13084-6:2005
Free-standing chimneys - Part 6: Steel liners - Design and execution (FOREIGN STANDARD)
DIN EN 13084-5:2005
Free-standing chimneys - Part 5: Material for brick liners - Product specifications (FOREIGN STANDARD)
DIN EN 13084-4:2005
Free-standing chimneys - Part 4: Brick liners - Design and execution (FOREIGN STANDARD)
DIN EN 13084-2:2007
Free-standing chimneys - Part 2: Concrete chimneys; German version EN 13084-2:2007 (FOREIGN STANDARD)
DIN EN 13084-1:2007
Free-standing chimneys - Part 1: General requirements; German version EN 13084-1:2007 (FOREIGN STANDARD)
DIN EN 13069:2005
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13063-2:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions; German version EN 13063-2:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 13063-1:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance; German version EN 13063-1:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 13062:2003
Products and systems for the protection and repair of concrete structure - Test methods - Determination of thixotropy of products for protects of reinforcement (FOREIGN STANDARD)
DIN EN 13057:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption (FOREIGN STANDARD)
DIN EN 13055-2:2004
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications (FOREIGN STANDARD)
DIN EN 13055-1 Berichtigung 1:2004
Corrigenda to DIN EN 13055-1:2002-08 (FOREIGN STANDARD)
DIN EN 13055-1:2002
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout (FOREIGN STANDARD)
DIN EN 13053:2007
Ventilation for buildings - Air handling units - Rating and performance for units, components and sections; German version EN 13053:2006 (FOREIGN STANDARD)
DIN EN 13051:2001
Curtain walling - Watertightness - Site test; English version of DIN EN 13051 (FOREIGN STANDARD)
DIN EN 13049:2003
Windows - Soft and heavy body impact - Test method, safety requirements and classification (FOREIGN STANDARD)
DIN EN 13043 Berichtigung 1:2004
Corrigenda to DIN EN 13043:2002-12 (FOREIGN STANDARD)
DIN EN 13043:2002
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas (FOREIGN STANDARD)
DIN EN 13030:2002
Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain; English version of DIN EN 13030 (FOREIGN STANDARD)
DIN EN 1303 Berichtigung 1:2008
Building hardware - Cylinders for locks - Requirements and test methods; German version EN 1303:2005, Corrigendum to DIN EN 1303:2005-04; German version EN 1303:2005/AC:2008 (Foreign Standard)
DIN EN 1303:2005
Building hardware - Cylinders for locks - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13020:2005
Road surface treatment machines - Safety requirements (FOREIGN STANDARD)
DIN EN 13015:2008
Maintenance for lifts and escalators - Rules for maintenance instructions; German version EN 13015:2001+A1:2008 (Foreign Standard)
DIN EN 13009:2000
Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; English version of DIN EN 13009 (FOREIGN STANDARD)
DIN EN 130:1990
Methods of testing doors; test for change in stiffness of the door leaves by repeated torsion (FOREIGN STANDARD)
DIN EN 1298:1996
Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual (FOREIGN STANDARD)
DIN EN 12978:2003
Industrial, commercial and garage doors and gates - Safety devices for power-operated doors and gates - Requirements and test methods (FOREIGN STANDARD)
DIN EN 12978/A1:2008
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods; English version EN 12978:2003/FprA1:2009 (Foreign Standard)
DIN EN 12970:2001
Mastic asphalt for waterproofing - Definitions, requirements and test methods; English version of DIN EN 12970 (FOREIGN STANDARD)
DIN EN 1297:2004
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water (FOREIGN STANDARD)
DIN EN 1296:2001
Bitumen, plastic and rubber sheets for roof waterprofing - Method of artificial ageing by long-term exposure to elevated temperature; English version of DIN EN 1296 (FOREIGN STANDARD)
DIN EN 12956:1999
Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability (FOREIGN STANDARD)
DIN EN 12951:2005
Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods (FOREIGN STANDARD)
DIN EN 1294:2000
Door leaves - Determination of the behaviour under humidity variations in successive uniform climates; English version of DIN EN 1294 (FOREIGN STANDARD)
DIN EN 12939:2001
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; English ver (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12897:2006
Water supply - Specification for indirectly heated unvented (closed) storage water heaters; German version EN 12897:2006 (FOREIGN STANDARD)
DIN EN 1287:1999
Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications (FOREIGN STANDARD)
DIN EN 12865:2001
Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; English version of DIN EN 12865 (FOREIGN STANDARD)
DIN EN 1286:1999
Sanitary tapware - Low pressure mechanical mixing valves - General technical specifications (FOREIGN STANDARD)
DIN EN 12859:2008
Gypsum blocks - Definitions, requirements and test methods; German version EN 12859:2008 (FOREIGN STANDARD)
DIN EN 12846:2002
Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer (FOREIGN STANDARD)
DIN EN 12843:2004
Precast concrete products - Masts and poles (FOREIGN STANDARD)
DIN EN 12839:2001
Precast concrete products - Elements for fences; English version of DIN EN 12839 (FOREIGN STANDARD)
DIN EN 12835:2001
Airtight shutters - Air permeability test; English version of DIN EN 12835 (FOREIGN STANDARD)
DIN EN 12833:2001
Skylight and conservatory roller shutters - Resistance to snow load - Test method; English version of DIN EN 12833 (FOREIGN STANDARD)
DIN EN 12831:2003
Heating systems in buildings - Method for calculation of the design heat load (FOREIGN STANDARD)
DIN EN 12828:2003
Heating systems in buildings - Design of water-based heating systems (FOREIGN STANDARD)
DIN EN 12825:2002
Raised access floors; English version of DIN EN 12825 (FOREIGN STANDARD)
DIN EN 12813:2004
Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design (FOREIGN STANDARD)
DIN EN 12812:2008
Falsework - Performance requirements and general design; German version EN 12812:2008 (Foreign Standard)
DIN EN 12811-3:2003
Temporary works equipment - Part 3: Load testing (FOREIGN STANDARD)
DIN EN 12811-2:2004
Temporary works equipment - Part 2: Information on materials (FOREIGN STANDARD)
DIN EN 12811-1:2004
Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design (FOREIGN STANDARD)
DIN EN 12810-2:2004
Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design (FOREIGN STANDARD)
DIN EN 12810-1:2004
Facade scaffolds made of prefabricated components - Part 1: Products specifications (FOREIGN STANDARD)
DIN EN 12808-4:2002
Adhesives and grouts for tiles - Part 4: Determination of shrinkage; English version of DIN EN 12808-4 (FOREIGN STANDARD)
DIN EN 12794 Berichtigung 1:2009
Precast concrete products - Foundation piles; German version EN 12794:2005+A1:2007, Corrigendum to DIN EN 12794:2007-08; German version EN 12794:2005+A1:2007/AC:2008 (Foreign Standard)
DIN EN 12794:2007
Precast concrete products - Foundation piles; German version EN 12794:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 12730:2001
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading; English version of DIN EN 12730 (FOREIGN STANDARD)
DIN EN 12706:1999
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics (FOREIGN STANDARD)
DIN EN 12691:2006
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact; German version EN 12691:2006 (FOREIGN STANDARD)
DIN EN 12667:2001
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; English version of DIN EN 12667 (FOREIGN STANDARD)
DIN EN 12664:2001
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12649:2008
Concrete compactors and smoothing machines - Safety; German version EN 12649:2008 (Foreign Standard)
DIN EN 1264-5:2009
Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output; German version EN 1264-5:2008 (Foreign Standard)
DIN EN 1264-4:2001
Floor heating - Systems and components - Part 4: Installation; English version of DIN EN 1264-4 (FOREIGN STANDARD)
DIN EN 1264-3:1997
Floor heating - Systems and components (FOREIGN STANDARD)
DIN EN 1264-2:2009
Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods; German version EN 1264-2:2008 (Foreign Standard)
DIN EN 12637-3:2004
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers (FOREIGN STANDARD)
DIN EN 12637-1:2004
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete (FOREIGN STANDARD)
DIN EN 12636:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete (FOREIGN STANDARD)
DIN EN 12635:2009
Industrial, commercial and garage doors and gates - Installation and use; German version EN 12635:2002+A1:2008 (Foreign Standard)
DIN EN 12629-8:2003
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) (FOREIGN STANDARD)
DIN EN 12629-7:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (FOREIGN STANDARD)
DIN EN 12629-5-4:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines (FOREIGN STANDARD)
DIN EN 12629-5-3:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines (FOREIGN STANDARD)
DIN EN 12629-5-2:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis (FOREIGN STANDARD)
DIN EN 12629-5-1:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis (FOREIGN STANDARD)
DIN EN 12629-4:2001
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; English version of DIN EN 12629-4 (FOREIGN STANDARD)
DIN EN 12629-3:2003
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines (FOREIGN STANDARD)
DIN EN 12629-2:2003
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines (FOREIGN STANDARD)
DIN EN 12629-1:2001
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; English version of DIN EN 12629-1 (FOREIGN STANDARD)
DIN EN 12620:2008
Aggregates for concrete; German version EN 12620:2002+A1:2008 (FOREIGN STANDARD)
DIN EN 12618-3:2004
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method (FOREIGN STANDARD)
DIN EN 12618-2:2004
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength (FOREIGN STANDARD)
DIN EN 12618-1:2003
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility (FOREIGN STANDARD)
DIN EN 12617-4:2002
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion (FOREIGN STANDARD)
DIN EN 12617-3:2002
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents (FOREIGN STANDARD)
DIN EN 12617-2:2004
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage (FOREIGN STANDARD)
DIN EN 12617-1:2003
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) (FOREIGN STANDARD)
DIN EN 12615:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength (FOREIGN STANDARD)
DIN EN 12614:2005
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers (FOREIGN STANDARD)
DIN EN 12605:2000
Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods; English version of DIN EN 12605 (FOREIGN STANDARD)
DIN EN 12604:2000
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements; English version of DIN EN 12604 (FOREIGN STANDARD)
DIN EN 12599:2000
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; English version of DIN EN 12599 (FOREIGN STANDARD)
DIN EN 12589:2002
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate; English version of DIN EN 12589 (FOREIGN STANDARD)
DIN EN 12541:2003
Pressure flushing valves and automatic closing urinal valves PN 10 (FOREIGN STANDARD)
DIN EN 1253-5:2004
Gullies for buildings - Part 5: Gullies with light liquids closure (FOREIGN STANDARD)
DIN EN 1253-4:2000
Gullies for buildings - Part 4: Access covers; English version of DIN EN 1253-4 (FOREIGN STANDARD)
DIN EN 1253-3:1999
Gullies for buildings - Part 3: Quality control (FOREIGN STANDARD)
DIN EN 1253-2:2004
Gullies for buildings - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 12504-4:2004
Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity (FOREIGN STANDARD)
DIN EN 12504-3:2005
Testing concrete in structures - Part 3: Determination of pull-out force (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 12504-2:2001
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; English version of DIN EN 12504-2 (FOREIGN STANDARD)
DIN EN 12504-1:2009
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; German version EN 12504-1:2009 (Foreign Standard)
DIN EN 12489:2000
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method; English version of DIN EN 12489 (FOREIGN STANDARD)
DIN EN 12480:2007
Gas meters - Rotary displacement gas meters; German version EN 12480:2002+A1:2006 (FOREIGN STANDARD)
DIN EN 12467:2006
Fibre cement flat sheets - Product specification and test methods; German version EN 12467:2004 + A1:2005 + A2:2006 (FOREIGN STANDARD)
DIN EN 12464-2:2007
Light and lighting - Lighting of work places - Part 2: Outdoor work places; German version EN 12464-2:2007 (FOREIGN STANDARD)
DIN EN 12464-1:2003
Light and lighting - Lighting of work places - Part 1: Indoor work places (FOREIGN STANDARD)
DIN EN 12453:2001
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; English version of DIN EN 12453 (FOREIGN STANDARD)
DIN EN 12446:2003
Chimneys - Components - Concrete outer wall elements (FOREIGN STANDARD)
DIN EN 12445:2001
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; English version of DIN EN 12445 (FOREIGN STANDARD)
DIN EN 12444:2001
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; English version of DIN EN 12444 (FOREIGN STANDARD)
DIN EN 12431:2007
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 12430:2007
Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 12429:1998
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions (FOREIGN STANDARD)
DIN EN 12428:2000
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; English version of DIN EN 12428 (FOREIGN STANDARD)
DIN EN 12427:2000
Industrial, commercial and garage doors and gates - Air permeability - Test method; English version of DIN EN 12427 (FOREIGN STANDARD)
DIN EN 12426:2000
Industrial, commercial and garage doors and gates - Air permeability - Classification; English version of DIN EN 12426 (FOREIGN STANDARD)
DIN EN 12425:2000
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; English version of DIN EN 12425 (FOREIGN STANDARD)
DIN EN 12424:2000
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification; English version of DIN EN 12424 (FOREIGN STANDARD)
DIN EN 12418:2000
Masonry and stone cutting-off machines for job site - Safety; English version of DIN EN 12418 (FOREIGN STANDARD)
DIN EN 12412-4:2003
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes (FOREIGN STANDARD)
DIN EN 12412-2:2003
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames (FOREIGN STANDARD)
DIN EN 12405-1:2007
Gas meters - Conversion devices - Part 1: Volume conversion; German version EN 12405-1:2005+A1:2006 (FOREIGN STANDARD)
DIN EN 12400:2003
Windows and pedestrian doors - Mechanical durability - Requirements and classification (FOREIGN STANDARD)
DIN EN 12390-8:2009
Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2009 (Foreign Standard)
DIN EN 12390-7:2009
Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2009 (Foreign Standard)
DIN EN 12390-6:2001
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; English version of DIN EN 12390-6 (FOREIGN STANDARD)
DIN EN 12390-5:2009
Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2009 (Foreign Standard)
DIN EN 12390-4:2000
Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; English version of DIN EN 12390-4 (FOREIGN STANDARD)
DIN EN 12390-3:2009
Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2009 (Foreign Standard)
DIN EN 12390-2:2009
Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German Version EN 12390-2:2009 (Foreign Standard)
DIN EN 12390-1:2001
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; English version of DIN EN 12390-1 (FOREIGN STANDARD)
DIN EN 12365-4:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method (FOREIGN STANDARD)
DIN EN 12365-3:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method (FOREIGN STANDARD)
DIN EN 12365-2:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods (FOREIGN STANDARD)
DIN EN 12365-1:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification (FOREIGN STANDARD)
DIN EN 12354-6:2004
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces (FOREIGN STANDARD)
DIN EN 12354-4:2001
Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; English version of DIN EN 12354-4 (FOREIGN STANDARD)
DIN EN 12354-3:2000
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; English version of DIN EN 12354-3 (FOREIGN STANDARD)
DIN EN 12354-2:2000
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; English version of DIN EN 12354-2 (FOREIGN STANDARD)
DIN EN 12354-1:2000
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms; English version of DIN EN 12354-1 (FOREIGN STANDARD)
DIN EN 12336:2005
Tunneling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements (FOREIGN STANDARD)
DIN EN 12336/A1:2008
Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements; English version EN 12336:2005/prA1:2008 (FOREIGN STANDARD)
DIN EN 12327:2000
Gas supply systems - Pressure testing, commissioning and decomissioning procedures - Functional requirements; English version of DIN EN 12327 (FOREIGN STANDARD)
DIN EN 12326-2:2004
Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test (FOREIGN STANDARD)
DIN EN 12326-1:2004
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification (FOREIGN STANDARD)
DIN EN 12320:2001
Building hardware - Padlocks and padlock fittings - Requirements and test methods; English version of DIN EN 12320 (FOREIGN STANDARD)
DIN EN 12317-2:2001
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12317-2 (FOREIGN STANDARD)
DIN EN 12317-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints (FOREIGN STANDARD)
DIN EN 12316-2:2001
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastics and rubber sheets for roof waterproofing; English version of DIN EN 12316-2 (FOREIGN STANDARD)
DIN EN 12316-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints (FOREIGN STANDARD)
DIN EN 12311-2:2000
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12311-2 (FOREIGN STANDARD)
DIN EN 12311-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties (FOREIGN STANDARD)
DIN EN 12310-2:2000
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12310-2 (FOREIGN STANDARD)
DIN EN 12310-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank) (FOREIGN STANDARD)
DIN EN 12269-2:2004
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test (FOREIGN STANDARD)
DIN EN 12269-1:2000
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test; English version of DIN EN 12269-1 (FOREIGN STANDARD)
DIN EN 12261:2007
Gas meters - Turbine gas meters; German version EN 12261:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 12239:2001
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications; English version of DIN EN 12239 (FOREIGN STANDARD)
DIN EN 12238:2001
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; English version of DIN EN 12238 (FOREIGN STANDARD)
DIN EN 12237:2003
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts (FOREIGN STANDARD)
DIN EN 12236:2002
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; English version of DIN EN 12236 (FOREIGN STANDARD)
DIN EN 12219:2000
Doors - Climatic influences - Requirements and classification; English version of DIN EN 12219 (FOREIGN STANDARD)
DIN EN 12217:2004
Doors - Operating forces - Requirements and classification (FOREIGN STANDARD)
DIN EN 12211:2000
Windows and doors - Resistance to wind load - Test method; English version of DIN EN 12211 (FOREIGN STANDARD)
DIN EN 12210:2003
Windows and doors - Resistance to wind load - Classification (includes Corrigendum AC:2002) (FOREIGN STANDARD)
DIN EN 12209 Berichtigung 1:2006
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003, Corrigenda to DIN EN 12209:2004-03; German version EN 12209:2003/AC:2005 (FOREIGN STANDARD)
DIN EN 12209:2004
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods (FOREIGN STANDARD)
DIN EN 12208:2000
Windows and doors - Watertightness - Classification; English version of DIN EN 12208 (FOREIGN STANDARD)
DIN EN 12207:2000
Windows and doors - Air permeability - Classification; English version of DIN EN 12207 (FOREIGN STANDARD)
DIN EN 12194:2000
Shutters, external and internal blinds - Misuse - Test methods; English version of DIN EN 12194 (FOREIGN STANDARD)
DIN EN 12192-1:2002
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar (FOREIGN STANDARD)
DIN EN 12190:1998
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar (FOREIGN STANDARD)
DIN EN 12189:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time (FOREIGN STANDARD)
DIN EN 12188:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterization of structural bonding agents (FOREIGN STANDARD)
DIN EN 12179:2000
Curtain walling - Resistance to wind load - Test method; English version of DIN EN 12179 (FOREIGN STANDARD)
DIN EN 12171:2002
Heating systems in buildings - Procedure for the preparation of document for operation, maintenance and use - Heating systems not requiring a trained operator (FOREIGN STANDARD)
DIN EN 12170:2002
Heating systems in buildings - Procedure for the preparation of document in respect of operation, maintenance and use - Heating systems requiring a trained operator (FOREIGN STANDARD)
DIN EN 12159:2001
Builders' hoists for persons and materials with vertically guided cages; English version of DIN EN 12159 (FOREIGN STANDARD)
DIN EN 12159/A1:2008
Builders hoists for persons and materials with vertically guided cages; English version EN 12159:2000/prA1:2008 (Foreign Standard)
DIN EN 12158-2:2001
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices; English version of DIN EN 12158-2 (FOREIGN STANDARD)
DIN EN 12158-1:2001
Builders' hoists for goods - Part 1: Hoists with accessible platforms; English version of DIN EN 12158-1 (FOREIGN STANDARD)
DIN EN 12155:2000
Curtain walling - Watertightness - Laboratory test under static pressure; English version of DIN EN 12155 (FOREIGN STANDARD)
DIN EN 12154:2000
Curtain walling - Watertightness - Performance requirements and classification; English version of DIN EN 12154 (FOREIGN STANDARD)
DIN EN 12153:2000
Curtain walling - Air permeability - Test methods; English version of DIN EN 12153 (FOREIGN STANDARD)
DIN EN 12152:2002
Curtain walling - Air permeability - Performance requirements and classification (FOREIGN STANDARD)
DIN EN 12151:2008
Machinery and plants for the preparation of concrete and mortar - Safety requirements; German version EN 12151:2007 (FOREIGN STANDARD)
DIN EN 12149:1998
Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release (FOREIGN STANDARD)
DIN EN 12114:2000
Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method; English version of DIN EN 12114 (FOREIGN STANDARD)
DIN EN 12111:2003
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements (FOREIGN STANDARD)
DIN EN 12110:2003
Tunnelling machines - Air locks - Safety requirements (FOREIGN STANDARD)
DIN EN 12109:1999
Vacuum drainage systems inside buildings (FOREIGN STANDARD)
DIN EN 12098-5:2005
Controls for heating systems - Part 5: Start-stop schedulers for heating systems (FOREIGN STANDARD)
DIN EN 12098-3:2003
Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems (FOREIGN STANDARD)
DIN EN 12098-2:2001
Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems; English version of DIN EN 12098-2 (FOREIGN STANDARD)
DIN EN 12098-1:1996
Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating systems (FOREIGN STANDARD)
DIN EN 12097:2006
Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems; German version EN 12097:2006 (FOREIGN STANDARD)
DIN EN 12091:1997
Thermal insulating products for building applications - Determination of freeze-thaw resistance (FOREIGN STANDARD)
DIN EN 12090:1997
Thermal insulating products for building applications - Determination of shear behaviour (FOREIGN STANDARD)
DIN EN 12089:1997
Thermal insulating products for building applications - Determination of bending behaviour (FOREIGN STANDARD)
DIN EN 12088:1997
Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (FOREIGN STANDARD)
DIN EN 12087:2007
Thermal insulating products for building applications - Determination of long term water absorption by immersion; German version EN 12087:1997 + A1:2006 (FOREIGN STANDARD)
DIN EN 12086:1997
Thermal insulating products for building applications - Determination of water vapour transmission properties (FOREIGN STANDARD)
DIN EN 12085:1997
Thermal insulating products for building applications - Determination of linear dimensions of test specimens (FOREIGN STANDARD)
DIN EN 12059:2008
Natural stone products - Dimensional stone work - Requirements; German version EN 12059:2008 (FOREIGN STANDARD)
DIN EN 12058:2005
Natural stone products - Slabs for floors and stairs - Requirements (FOREIGN STANDARD)
DIN EN 12057:2005
Natural stone products - Modular tiles - Requirements (FOREIGN STANDARD)
DIN EN 12056-5:2001
Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and user; English version of DIN EN 12056-5 (FOREIGN STANDARD)
DIN EN 12056-4:2001
Gravity drainage systems inside buildings - Part 4: Waste water lifting plants; Layout and calculation; English version of DIN EN 12056-4 (FOREIGN STANDARD)
DIN EN 12056-3:2001
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; English version of DIN EN 12056-3 (FOREIGN STANDARD)
DIN EN 12056-2:2001
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; English version of DIN EN 12056-2 (FOREIGN STANDARD)
DIN EN 12051:1999
Building hardware - Door and window bolts - Requirements and test methods (FOREIGN STANDARD)
DIN EN 12050-4:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; English version of DIN EN 12050-4 (FOREIGN STANDARD)
DIN EN 12050-3:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications; English version of DIN EN 12050-3 (FOREIGN STANDARD)
DIN EN 12050-2:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater; English version of DIN EN 12050-2 (FOREIGN STANDARD)
DIN EN 12050-1:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter; English version of DIN EN 12050-1 (FOREIGN STANDARD)
DIN EN 12046-2:2000
Operating forces - Test method - Part 2: Doors; English version of DIN EN 12046-2 (FOREIGN STANDARD)
DIN EN 12046-1:2004
Operating forces - Test method - Part 1: Windows (FOREIGN STANDARD)
DIN EN 12045:2000
Shutters and blinds, power-operated - Safety in use - Measurement of the transmitted force; English version of DIN EN 12045 (FOREIGN STANDARD)
DIN EN 12039:1999
Flexible sheets for waterproofing - Bitumen s for roof waterproofing - Determination of adhesion of granules (FOREIGN STANDARD)
DIN EN 12001:2004
Conveying, spraying and placing machines for concrete and mortar - Safety requirements (FOREIGN STANDARD)
DIN EN 1195:1998
Timber structures - Test methods - Performance of structural floor decking (FOREIGN STANDARD)
DIN EN 1192:2000
Doors - Classification of strength requirements; English version of DIN EN 1192 (FOREIGN STANDARD)
DIN EN 1191:2000
Windows and doors - Resistance to repeated opening and closing - Test method; English version of DIN EN 1191 (FOREIGN STANDARD)
DIN EN 1170-8:2009
Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version EN 1170-8:2008 (Foreign Standard)
DIN EN 1170-7:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content (FOREIGN STANDARD)
DIN EN 1170-6:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density (FOREIGN STANDARD)
DIN EN 1170-5:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength by the 'complete bending test' method (FOREIGN STANDARD)
DIN EN 1170-4:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength by the 'Simplified bending test' method (FOREIGN STANDARD)
DIN EN 1170-3:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC (FOREIGN STANDARD)
DIN EN 1170-2:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC by the 'Wash out test' (FOREIGN STANDARD)
DIN EN 1170-1:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix by the 'Slump test' method (FOREIGN STANDARD)
DIN EN 1169:1999
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement (FOREIGN STANDARD)
DIN EN 1168:2009
Precast concrete products - Hollow core slabs; German version EN 1168:2005+A2:2009 (Foreign Standard)
DIN EN 115-1:2009
Safety of escalators and moving walks - Part 1: Construction and installation; German version EN 115-1:2008 (Foreign Standard)
DIN EN 1148:1998
Water to water heat exchangers for district heating - Test procedures for establishing the performance data (FOREIGN STANDARD)
DIN EN 1148/A1:2005
Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data (FOREIGN STANDARD)
DIN EN 1121:2000
Doors - Behaviour between two different climates - Test method; English version of DIN EN 1121 (FOREIGN STANDARD)
DIN EN 1112:2008
Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1112:2008 (FOREIGN STANDARD)
DIN EN 1111:1998
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification (FOREIGN STANDARD)
DIN EN 1110:1999
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature (FOREIGN STANDARD)
DIN EN 1109:1999
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature (FOREIGN STANDARD)
DIN EN 1108:1999
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes (FOREIGN STANDARD)
DIN EN 1107-2:2001
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1107-2 (FOREIGN STANDARD)
DIN EN 1107-1:1999
Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1097-9:2005
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test (includes Amendment A1:2005) (FOREIGN STANDARD)
DIN EN 1097-8:2000
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value (FOREIGN STANDARD)
DIN EN 1097-7:2008
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2008 (FOREIGN STANDARD)
DIN EN 1097-6:2005
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption (FOREIGN STANDARD)
DIN EN 1097-5:2008
Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven; German version EN 1097-5:2008 (FOREIGN STANDARD)
DIN EN 1097-4:2008
Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler; German version EN 1097-4:2008 (FOREIGN STANDARD)
DIN EN 1097-3:1998
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids (FOREIGN STANDARD)
DIN EN 1097-2:2006
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation; German version EN 1097-2:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 1097-10:2003
Tests for mechanical and physical properties of aggregates - Part 10: Determination of the water suction height (FOREIGN STANDARD)
DIN EN 1090-3:2008
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures; German version EN 1090-3:2008 (Foreign Standard)
DIN EN 1090-2:2008
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures; German version EN 1090-2:2008 (Foreign Standard)
DIN EN 1065:1998
Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests (FOREIGN STANDARD)
DIN EN 1054:1995
Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints (FOREIGN STANDARD)
DIN EN 1052-5:2005
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method (FOREIGN STANDARD)
DIN EN 1052-4:2000
Methods of test for masonry - Part 4: Determination of shear strength including damp-proof course; English version of DIN EN 1052-4 (FOREIGN STANDARD)
DIN EN 1052-3:2007
Methods of test for masonry - Part 3: Determination of initial shear strength; German version EN 1052-3:2002 + A1:2007 (FOREIGN STANDARD)
DIN EN 1052-2:1999
Methods of test for masonry - Part 2: Determination of flexural strength (FOREIGN STANDARD)
DIN EN 1052-1:1998
Methods of test for masonry - Part 1: Determination of compressive strength (FOREIGN STANDARD)
DIN EN 1027:2000
Windows and doors - Watertightness - Test method; English version of DIN EN 1027 (FOREIGN STANDARD)
DIN EN 1026:2000
Windows and doors - Air permeability - Test method; English version of DIN EN 1026 (FOREIGN STANDARD)
DIN EN 1024:1997
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics (FOREIGN STANDARD)
DIN EN 1015-9:2007
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar; German version EN 1015-9:1999+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-7:1998
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar (FOREIGN STANDARD)
DIN EN 1015-6:2007
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar; German version EN 1015-6:1998+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-4:1998
Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) (FOREIGN STANDARD)
DIN EN 1015-3:2007
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table); German version EN 1015-3:1999+A1:2004+A2:2006 (FOREIGN STANDARD)
DIN EN 1015-21:2003
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates (FOREIGN STANDARD)
DIN EN 1015-2:2007
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars; German version EN 1015-2:1998+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-18:2003
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar (FOREIGN STANDARD)
DIN EN 1015-17:2005
Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars (FOREIGN STANDARD)
DIN EN 1015-12:2000
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates; English version of DIN EN 1015-12 (FOREIGN STANDARD)
DIN EN 1015-11:2007
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar; German version EN 1015-11:1999+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-10:2007
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar; German version EN 1015-10:1999+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-1:2007
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006 (FOREIGN STANDARD)
DIN EN 1008:2002
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete (FOREIGN STANDARD)
DIN 7593:1981
Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10 (FOREIGN STANDARD)
DIN 7591:1981
Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 (FOREIGN STANDARD)
DIN 68800-2:1996
Wood preservation in building construction - Preventive structural measures (FOREIGN STANDARD)
DIN 68121-1:1993
Timber profiles for windows and window doors; dimensions, quality requirements (FOREIGN STANDARD)
DIN 52612-3:1979
Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Thermal Resistance of Laminated Materials for Use in Building Practice (FOREIGN STANDARD)
DIN 52612-2:1984
Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications (FOREIGN STANDARD)
DIN 52459:1981
Testing of building sealants; determination of the water absorption of backfill material; retentive capacity (FOREIGN STANDARD)
DIN 52455-3:1998
Determination of adhesion/cohesion of construction sealants after exposure to artificial light (FOREIGN STANDARD)
DIN 52455-1:2003
Determining the adhesion/cohesion of building sealants after conditioning in standard atmospheres, water or at elevated temperatures (FOREIGN STANDARD)
DIN 52452-2:1993
Testing of construction sealants for compatibility with chemicals (FOREIGN STANDARD)
DIN 52452-1:1989
Testing of building sealants for compatibility with construction materials (FOREIGN STANDARD)
DIN 52451-1:2007
Testing of sealing materials for buildings - Part 1: Determination of change in mass and volume of self-levelling joint sealants (Foreign Standard)
DIN 52450:1985
Testing of inorganic non-metallic building materials; determination of shrinkage and expansion on small specimens (FOREIGN STANDARD)
DIN 52274:1986
Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer (FOREIGN STANDARD)
DIN 52271:1981
Testing of mineral fibre insulating materials; Behaviour at elevated temperatures (FOREIGN STANDARD)
DIN 52252-2:1986
Testing the frost resistance of facing bricks and clinker blocks; freezing of bricks arranged in test blocks (FOREIGN STANDARD)
DIN 52252-1:1986
Testing the frost resistance of facing bricks and clinker blocks; freezing of single bricks on all sides (FOREIGN STANDARD)
DIN 52251-5:1987
Indirect methods of determining the frost resistance of roofing tiles; determination of drying shrinkage and firing shrinkage (FOREIGN STANDARD)
DIN 52251-3:1987
Indirect methods of determining the frost resistance of roofing tiles; determination of coefficient of impregnation (FOREIGN STANDARD)
DIN 52251-2:1987
Indirect methods of determining the frost resistance of roofing tiles; determination of water absorption (FOREIGN STANDARD)
DIN 52219:1993
On-site measurement of noise emitted by water supply and drainage systems (FOREIGN STANDARD)
DIN 52210-6:1989
Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference (FOREIGN STANDARD)
DIN 52143:1985
Bitumen roofing felt with glass fleece base; terms and definitions, designation, requirements (FOREIGN STANDARD)
DIN 52132:1996
Polymeric bitumen roofing felt - Requirements and testing (FOREIGN STANDARD)
DIN 52128:1977
Bituminous Roof Sheeting with Felt Core; Definition, Designation, Requirements (FOREIGN STANDARD)
DIN 52123:1985
Testing of bitumen and polymer bitumen sheeting and felts (FOREIGN STANDARD)
DIN 52096:1987
Testing of fillers for road construction; testing the stiffening action of fillers on bitumen (FOREIGN STANDARD)
DIN 52024:2002
Distillation of petroleum-fluxed bitumen (FOREIGN STANDARD)
DIN 52005:2004
Bitumen and bituminous binders - Determination of ash (FOREIGN STANDARD)
DIN 51290-4:1991
Testing of polymer concrete for use in mechanical engineering - In-process testing and testing of components (FOREIGN STANDARD)
DIN 51290-3:1991
Testing of polymer concrete for use in mechanical engineering - Testing of specimens prepared in mould (FOREIGN STANDARD)
DIN 51290-2:1991
Testing of polymer concrete for use in mechanical engineering; testing of binders, fillers and ready-to-use mixtures (FOREIGN STANDARD)
DIN 51290-1:1991
Testing of polymer concrete for use in mechanical engineering; terminology (FOREIGN STANDARD)
DIN 51043:1979
Trass; Requirements, Tests (FOREIGN STANDARD)
DIN 5034-4:1994
Daylight in interiors - Part 4: Simplified method of determining window sizes in dwellings (FOREIGN STANDARD)
DIN 5034-2:1985
Daylight in interiors; principles (FOREIGN STANDARD)
DIN 5034-1:1999
Daylight in interiors - General requirements (FOREIGN STANDARD)
DIN 4753-6:1986
Water heating installations for drinking water and service water; cathodic corrosion protection of enamelled steel containers; requirements and testing (FOREIGN STANDARD)
DIN 4753-11:1990
Water heaters and hot water systems for drinking and service water; indirect heat exchangers; requirements, testing and marking (FOREIGN STANDARD)
DIN 43627-3:1998
Recessed house connection boxes for HRC fuses of size 00 rated for 100 A/500 V and size 1 rated for 250 A/500 V (FOREIGN STANDARD)
DIN 4235-5:1978
Compacting of Concrete by Vibrating; Compacting by Surface Vibrators (FOREIGN STANDARD)
DIN 4235-4:1978
Compacting of Concrete by Vibrating; Compacting of In-situ by Formwork Vibrators (FOREIGN STANDARD)
DIN 4235-3:1978
Compacting of Concrete by Vibrating; Compacting by External Vibrators during the Manufacture of Precast Components (FOREIGN STANDARD)
DIN 4235-2:1978
Compacting of Concrete by Vibrating; Compacting by Internal Vibrators (FOREIGN STANDARD)
DIN 4235-1:1978
Compacting of Concrete by Vibrating; Vibrators and Vibration Mechanics (FOREIGN STANDARD)
DIN 4226-100:2002
Aggregates for mortar and concrete - Part 100: Recycled aggregates (FOREIGN STANDARD)
DIN 4172:1955
Modular Co-ordination in Building Construction (FOREIGN STANDARD)
DIN 4166:1997
Autoclaved aerated concrete slabs and panels (FOREIGN STANDARD)
DIN 4160:2000
Non-loadbearing clay blocks for use in reinforced concrete ribbed and beam floors (FOREIGN STANDARD)
DIN 4159:1999
Loadbearing clay blocks for use in hollow pot and reinforced concrete ribbed floors, and wall panels (including Coorrigendum 1, Juni 2000) (FOREIGN STANDARD)
DIN 4158:1978
Filler concrete joists for reinforced and prestressed concrete floors (FOREIGN STANDARD)
DIN 4150-3:1999
Structural vibration - Effects of vibration on structures (FOREIGN STANDARD)
DIN 4150-1:2001
Structural vibration - Part 1: Prediction of vibration parameters (FOREIGN STANDARD)
DIN 4149:2005
Buildings in german earthquake areas - Design loads, analysis and structural design of buildings (FOREIGN STANDARD)
DIN 4141-3:1984
Structural bearings; bearing systems for buildings (FOREIGN STANDARD)
DIN 4141-2:1984
Structural bearings; bearing systems for civil engineering structures forming part of traffic routes (bridges) (FOREIGN STANDARD)
DIN 4123:2000
Excavations, foundations and underpinning work adjacent to existing buildings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 4109:1989
Sound insulation in buildings; requirements and testing (FOREIGN STANDARD)
DIN 4103-4:1988
Internal non-loadbearing partitions; partitions with timber framing (FOREIGN STANDARD)
DIN 4103-2:1985
Internal non-loadbearing partitions; gypsum wallboard partitions (FOREIGN STANDARD)
DIN 4103-1:1984
Internal non-loadbearing partitions; requirements, testing (FOREIGN STANDARD)
DIN 3476:1996
Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings - Requirements and testing (FOREIGN STANDARD)
DIN 3475:1993
Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing (FOREIGN STANDARD)
DIN 3230-4:1977
Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing (FOREIGN STANDARD)
DIN 276-1:2008
Building costs - Part 1: Building construction (Foreign Standard)
DIN 272:1986
Testing of magnesium oxychloride screeds (FOREIGN STANDARD)
DIN 24100-1:1978
Machines for the building and building material industries; mechanical comminution; concepts relating to materials processing (FOREIGN STANDARD)
DIN 1996-9:1981
Testing of Bituminous Materials for Road Building and Related Purposes; Swelling Test (FOREIGN STANDARD)
DIN 1996-6:1988
Testing of asphalt; determination of binder content and recovery of binder (FOREIGN STANDARD)
DIN 1996-4:1984
Testing of asphalt; moulding of specimens from bituminous mixtures (FOREIGN STANDARD)
DIN 1996-3:1990
Testing of asphalt; sample preparation (FOREIGN STANDARD)
DIN 1996-17:1990
Testing of asphalt; determination of dimensional stability when heated (Nuessel deformation index) (FOREIGN STANDARD)
DIN 1996-14:1990
Testing of asphalt; determination of grading of mineral aggregate recovered from asphalt (FOREIGN STANDARD)
DIN 1996-13:1984
Testing of asphalt; indentation testing using a flat-ended indentor pin (FOREIGN STANDARD)
DIN 1986-4:2003
Site drainage systems - Part 4: Use of sewer pipes and fittings made of different materials (FOREIGN STANDARD)
DIN 1961:2006
German construction contract procedures - Part B: General conditions of contract relating to the execution of building works (FOREIGN STANDARD)
DIN 1960:2006
Contract procedures for building works - Part A: General directions of contract letting for building works (FOREIGN STANDARD)
DIN 1946-4:2008
Ventilation and air conditioning - Part 4: Ventilation in buildings and rooms of health care (Foreign Standard)
DIN 18889:1956
Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing (FOREIGN STANDARD)
DIN 18808:1984
Steel structures; structures made from hollow sections subjected to predominantly static loading (FOREIGN STANDARD)
DIN 18807-8:1995
Trapezoidal aluminium sheeting and connections in building - Analysis at ultimate and serviceability limit states (FOREIGN STANDARD)
DIN 18807-7:1995
Trapezoidal aluminium sheeting and connections in building - Determination of loadbearing capacity by testing (FOREIGN STANDARD)
DIN 18807-6:1995
Trapezoidal aluminium sheeting and connections in building - Part 6: Determination of loadbearing capacity by calculation (FOREIGN STANDARD)
DIN 18807-3:1987
Trapezoidal sheeting in building; trapezoidal steel sheeting; structural analysis and design (FOREIGN STANDARD)
DIN 18807-2:1987
Trapezoidal sheeting in building; trapezoidal steel sheeting; determination of loadbearing capacity by testing (FOREIGN STANDARD)
DIN 18807-1:1987
Trapezoidal sheeting in building; trapezoidal steel sheeting; general requirements and determination of loadbearing capacity by calculation (FOREIGN STANDARD)
DIN 18801:1983
Structural steel in building; design and construction (FOREIGN STANDARD)
DIN 18650-2:2005
Building hardware - Powered pedestrian doors - Part 2: Safety at powered pedestrian doors (FOREIGN STANDARD)
DIN 18650-1:2005
Building hardware - Powered pedestrian doors - Part 1: Product requirements and test methods (FOREIGN STANDARD)
DIN 18560-7:2004
Floor screeds - Part 7: Heavy-duty screeds (industrial screeds) (FOREIGN STANDARD)
DIN 18560-4:2004
Floor screeds - Part 4: Screeds laid on separated layer (FOREIGN STANDARD)
DIN 18560-3:2006
Floor screeds in building construction - Part 3: Base-bonded floor screeds (FOREIGN STANDARD)
DIN 18560-2:2004
Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on insulation layers (FOREIGN STANDARD)
DIN 18560-1:2004
Floor screeds in building construction - Part 1: General requirements, testing and construction (FOREIGN STANDARD)
DIN 18558:1985
Synthetic resin plasters; terminology, requirements, application (FOREIGN STANDARD)
DIN 18556:1985
Testing of coating material for synthetic resin plasters and of synthetic resin plasters (FOREIGN STANDARD)
DIN 18555-9:1999
Testing of mortars containing mineral binders - Part 9: Determination the compressive strength of hardened mortar (FOREIGN STANDARD)
DIN 18555-7:1987
Testing of mortars containing mineral binders; determination of water retentivity of freshly mixed mortar by the filter plate method (FOREIGN STANDARD)
DIN 18555-6:1987
Testing of mortars containing mineral binders; determination of bond strength of hardened mortar (FOREIGN STANDARD)
DIN 18555-4:1986
Testing of mortars containing mineral binders; hardened mortars; determination of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test (FOREIGN STANDARD)
DIN 18555-3:1982
Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density (FOREIGN STANDARD)
DIN 18554-1:1985
Testing of masonry; determination of compressive strenght and of elastic modulus (FOREIGN STANDARD)
DIN 18545-3:1992
Glazing with sealants; rebates; glazing systems (FOREIGN STANDARD)
DIN 18545-1:1992
Glazing with sealants; rebates; requirements (FOREIGN STANDARD)
DIN 18530:1987
Solid structural decks for roofs; design and construction (FOREIGN STANDARD)
DIN 18516-4:1990
Back-ventilated, non-loadbearing, external enclosures of buildings, made from tempered safety glass panels - Requirements and testing (FOREIGN STANDARD)
DIN 18515-2:1993
Design and installation of masonry cladding on supports (FOREIGN STANDARD)
DIN 18515-1:1998
Design and installation of tile or stone cladding (FOREIGN STANDARD)
DIN 18459:2006
German construction contract procedures - Part C: General technical specifications for building works - Demolition and deconstruction works (FOREIGN STANDARD)
DIN 18451:2006
German construction contract procedures - Part C: General technical specifications for building works - Scaffolding works (FOREIGN STANDARD)
DIN 18421:2006
German construction contract procedures - Part C: General technical specifications for building works - Insulation works on technical installations (FOREIGN STANDARD)
DIN 18386:2006
German construction contract procedures - Part C: General technical specifications for building works - Automation installations in buildings (FOREIGN STANDARD)
DIN 18385:2002
Construction contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Installation of lifts, escalators, passenger conveyors and materials handling equipment (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 18384:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightning protection systems (FOREIGN STANDARD)
DIN 18382:2002
Construction contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Electrical supply systems rated for voltages up to 36 kV (FOREIGN STANDARD)
DIN 18381:2006
German construction contract procedures - Part C: General technical specifications for building works - Gas, water and sewage plumbing works inside of buildings (FOREIGN STANDARD)
DIN 18380:2006
German construction contract procedures - Part C: General technical specifications for building works - Systems for heating and central water heating (FOREIGN STANDARD)
DIN 18379:2006
German construction contract procedures - Part C: General technical specifications for building works - Room ventilation systems (FOREIGN STANDARD)
DIN 18367:2002
Constructin contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Laying of wood block flooring (FOREIGN STANDARD)
DIN 18366:2006
German construction contract procedures - Part C: General technical specifications for building works - Wall paper hanging (FOREIGN STANDARD)
DIN 18365:2006
German construction contract procedures - Part C: General technical specifications for building works - Flooring works (FOREIGN STANDARD)
DIN 18364:2006
German construction contract procedures - Part C: General technical specifications for building works - Works for protection of steel structures (FOREIGN STANDARD)
DIN 18363:2006
German construction contract procedures - Part C: General technical specifications for building works - Painting - coatings works (FOREIGN STANDARD)
DIN 18361:2002
Contuction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Glazing (FOREIGN STANDARD)
DIN 18360:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Metalwork (FOREIGN STANDARD)
DIN 18358:2006
German construction contract procedures - Part C: General technical specifications for building works - Rolling shutters works (FOREIGN STANDARD)
DIN 18357:2006
German construction contract procedures - Part C: General technical specifications for building works - Mounting of window and door fittings (FOREIGN STANDARD)
DIN 18356:2006
German construction contract procedures - Part C: General technical specifications for building works - Parquet works (FOREIGN STANDARD)
DIN 18355:2006
German construction contract procedures - Part C: General technical specifications for building works - Joinery works (FOREIGN STANDARD)
DIN 18354:2006
German construction contract procedures - Part C: General technical specifications for building works - Asphalt flooring works (FOREIGN STANDARD)
DIN 18353:2006
German construction contract procedures - Part C: General technical specifications for building works - Floor screed works (FOREIGN STANDARD)
DIN 18352:2006
German construction contract procedures - Part C: General technical specifications for building works - Tile laying works (FOREIGN STANDARD)
DIN 18351:2006
German construction contract procedures - Part C: General technical specifications for building works - Ventilated curtain walling (FOREIGN STANDARD)
DIN 18350:2006
German construction contract procedures - Part C: General technical specifications for building works - Plaster and stucco works (FOREIGN STANDARD)
DIN 18349:2006
German construction contract procedures - Part C: General technical specifications for building works - Concrete maintenance works (FOREIGN STANDARD)
DIN 18345:2006
German construction contract procedures - Part C: General technical specifications for building works - Thermal insulation composite system (FOREIGN STANDARD)
DIN 18340:2006
German construction contract procedures - Part C: General technical specifications for building works - Dry construction works (FOREIGN STANDARD)
DIN 18339:2002
Construction contract procedures (VOB) C: General technical specifications in construction contracts (ATV); Sheet metal roofing and wall covering work (FOREIGN STANDARD)
DIN 18338:2006
German construction contract procedures - Part C: General technical specifications for building works - Roof covering and roof sealing works (FOREIGN STANDARD)
DIN 18336:2002
Construction contract procedures (VOB) - Part C: General technical specifications fin construction contracts (ATV); Waterproofing (FOREIGN STANDARD)
DIN 18335:2002
Construction contract procedures (VOB) C: General technical specifications in construction contracts (ATV); Structural steelwork (FOREIGN STANDARD)
DIN 18334:2006
German construction contract procedures - Part C: General technical specifications for building works - Carpentry and timber construction works (FOREIGN STANDARD)
DIN 18333:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Cast stone work (FOREIGN STANDARD)
DIN 18332:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Natural stone work (FOREIGN STANDARD)
DIN 18331:2006
German construction contract procedures - Part C: General technical specifications for building works - Concrete works (FOREIGN STANDARD)
DIN 18330:2006
German construction contract procedures - Part C: General technical specifications for building works - Masonry work (FOREIGN STANDARD)
DIN 18325:2002
Construction Contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Track construction (FOREIGN STANDARD)
DIN 18322:2006
German construction contract procedures - Part C: General technical specifications for building works - Cable laying works (FOREIGN STANDARD)
DIN 18321:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Jet grouting works (FOREIGN STANDARD)
DIN 18320:2006
German construction contract procedures - Part C: General technical specifications for building works - Landscaping works (FOREIGN STANDARD)
DIN 18319:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Trenchless pipelaying (FOREIGN STANDARD)
DIN 18318:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - Stone and tile pavements without binders, kerbs (FOREIGN STANDARD)
DIN 18317:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - top layers of asphalt (FOREIGN STANDARD)
DIN 18316:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - top layers with hydraulic binders (FOREIGN STANDARD)
DIN 18315:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - top layers without binders (FOREIGN STANDARD)
DIN 18314:2006
German construction contract procedures - Part C: General technical specifications for building works - Air-placed concrete works (FOREIGN STANDARD)
DIN 18313:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Diaphragm walling (FOREIGN STANDARD)
DIN 18312:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Underground construction work (FOREIGN STANDARD)
DIN 18311:2006
German construction contract procedures - Part C: General technical specifications for building works - Dredging work (FOREIGN STANDARD)
DIN 18310:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Revetment work (FOREIGN STANDARD)
DIN 18309:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Ground treatment by grouting (FOREIGN STANDARD)
DIN 18308:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Land drainage (FOREIGN STANDARD)
DIN 18307:2006
German construction contract procedures - Part C: General technical specifications for building works - Works for pressure pipe lines in the ground (FOREIGN STANDARD)
DIN 18306:2000
Construction contract procedures (VOB) - Part C: General technical specifications in contruction contracts (ATV); Underground drainage (FOREIGN STANDARD)
DIN 18305:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Groundwater lowering (FOREIGN STANDARD)
DIN 18304:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Piling (FOREIGN STANDARD)
DIN 18303:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Timbering to trenchwork (FOREIGN STANDARD)
DIN 18302:2006
German construction contract procedures - Part C: General technical specifications for building works - Borehole extension works (FOREIGN STANDARD)
DIN 18301:2006
German construction contract procedures - Part C: General technical specifications for building works - Drilling works (FOREIGN STANDARD)
DIN 18300:2006
German construction contract procedures - Part C: General technical specifications for building works - Earthworks (FOREIGN STANDARD)
DIN 18299:2006
German construction contract procedures - Part C: General technical specifications for building works - General rules for all kinds of building works (FOREIGN STANDARD)
DIN 18262:1969
Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors (FOREIGN STANDARD)
DIN 18217:1981
Concrete surfaces and formwork surface (FOREIGN STANDARD)
DIN 18216:1986
Formwork ties; requirements, testing, use (FOREIGN STANDARD)
DIN 18205:1996
Brief for building design (FOREIGN STANDARD)
DIN 18203-3:2008
Tolerances in building constructions - Part 3: Building components of wood and derived timber products (Foreign Standard)
DIN 18203-1:1997
Tolerances for building - Part 1: Precast ordinary, reinforced and prestressed concrete components (FOREIGN STANDARD)
DIN 18202:2005
Tolerances in building construction - Buildings (FOREIGN STANDARD)
DIN 18200:2000
Conformity assessment of construction products - Factory production control, third-party inspection, and certification (FOREIGN STANDARD)
DIN 18192:1985
Bonded polyester fleece used as an inlay for bitumen and polymer bitumen sheeting; concept, designation, requirements, testing (FOREIGN STANDARD)
DIN 18182-4:1987
Accessories for the installation of gypsum plasterboard; nails (FOREIGN STANDARD)
DIN 18162:2000
Solid lightweight concrete blocks for walls (FOREIGN STANDARD)
DIN 18159-1:1991
Polyurethane (PUR) foam thermal insulating material applied in situ - Applications, requirements, workmanship and testing (FOREIGN STANDARD)
DIN 18158:1986
Clinker floor tiles (FOREIGN STANDARD)
DIN 18157-2:1982
Application of ceramic tiling using the thin-bed method; dispersion adhesives (FOREIGN STANDARD)
DIN 18148:2000
Hollow lightweight concrete concrete blocks for walls (FOREIGN STANDARD)
DIN 18100:1983
Doors; wall openings for doors with dimensions in accordance with DIN 4172 (FOREIGN STANDARD)
DIN 18095-3:1999
Smoke control door and shutter assemblies - Part 3: Application of test results (FOREIGN STANDARD)
DIN 18095-2:1991
Smoke control doors; type testing for durability and leakage (FOREIGN STANDARD)
DIN 18095-1:1988
Smoke control doors; concepts and requirements (FOREIGN STANDARD)
DIN 1164-12:2005
Special cement - Part 12: Composition, specification and conformity evaluation for cement with higher quantity of organic constituents (Foreign Standard)
DIN 1164-11:2003
Special cement - Part 11: Composition, specification and conformity evaluation for cement with short setting time (FOREIGN STANDARD)
DIN 1164-10:2004
Special cement - Part 10: Composition, requirements and conformity evaluation for special common cement (FOREIGN STANDARD)
DIN 1100:2004
Hard aggregates for cement-bound floor screeds - Requirements and test methods (FOREIGN STANDARD)
DIN 1057-1:1985
Building materials for free-standing chimneys; compass bricks; requirements, testing, inspection (FOREIGN STANDARD)
DIN 1055-2:1976
Design Loads for Buildings; Soil Characteristics; Specific Weight, Angle of Friction, Cohesion, Angle of Wall Friction (FOREIGN STANDARD)
DIN 105-5:1984
Clay bricks; lightweight horizontally perforated bricks and lightweight horizontally perforated brick panels (FOREIGN STANDARD)
DIN 1053-3:1990
Reinforced masonry; design and construction (FOREIGN STANDARD)
DIN 1053-2:1996
Masonry - Masonry strength classification on the basis of suitability testing (FOREIGN STANDARD)
DIN 1053-1:1996
Masonry - Design and construction (FOREIGN STANDARD)
DIN 1048-5:1991
Testing concrete; testing of hardened concrete (specimens prepared in mould) (FOREIGN STANDARD)
DIN 1048-2:1991
Testing concrete; testing of hardened concrete (specimens taken in situ) (FOREIGN STANDARD)
DIN 1048-1:1991
Testing concrete; testing of fresh concrete (FOREIGN STANDARD)
DIN 1045-4:2001
Plain, reinforced and prestressed concrete structures - Part 4: Supplementary specifications governing the production and conformity of precast concrete elements (FOREIGN STANDARD)
DIN 1045-3:2008
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures (Foreign Standard)
DIN 1045-2:2008
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, properties, production and conformity - Application rules for DIN EN 206-1 (Foreign Standard)
DIN 1045-1:2008
Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction (Foreign Standard)
DIN EN 805:2000
Water supply - Requirements for systems and components outside buildings; English version of DIN EN 805 (FOREIGN STANDARD)
DIN EN 773:1999
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers (FOREIGN STANDARD)
DIN EN 752:2008
Drain and sewer systems outside buildings; German version EN 752:2008 (FOREIGN STANDARD)
DIN EN 588-2:2002
Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers; English version of DIN EN 588-2 (FOREIGN STANDARD)
DIN EN 500-6:2009
Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers; German version EN 500-6:2006+A1:2008 (Foreign Standard)
DIN EN 500-3:2009
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines; German version EN 500-3:2006+A1:2008 (Foreign Standard)
DIN EN 500-2:2009
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines; German version EN 500-2:2006+A1:2008 (Foreign Standard)
DIN EN 500-1:2007
Mobile road construction machinery - Safety - Part 1: Common requirements; German version EN 500-1:2006 (FOREIGN STANDARD)
DIN EN 476:1997
General requirements for components used in discharge pipes, drains and sewers for gravity systems (FOREIGN STANDARD)
DIN EN 40-3-3:2003
Lighting columns - Part 3-3: Design and verification; Verification by calculation (FOREIGN STANDARD)
DIN EN 40-2:2005
Lighting columns - Part 2: General requirements and dimensions (FOREIGN STANDARD)
DIN EN 40-1:1992
Lighting columns; part 1: definitions and terms; trilingual version EN 40-1:1991 (FOREIGN STANDARD)
DIN EN 295-7:1995
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking (FOREIGN STANDARD)
DIN EN 295-6:1995
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes (FOREIGN STANDARD)
DIN EN 295-5:1999
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings (includes Amendment A1:1999) (FOREIGN STANDARD)
DIN EN 295-4:1995
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories (FOREIGN STANDARD)
DIN EN 295-10:2005
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements (FOREIGN STANDARD)
DIN EN 1917 Berichtigung 2:2008
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced; German version EN 1917:2002, Corrigendum to DIN EN 1917:2003-04; German version EN 1917:2002/AC:2008 (Foreign Standard)
DIN EN 1917 Berichtigung 1:2004
Corrigenda to DIN EN 1917:2003-04 (FOREIGN STANDARD)
DIN EN 1917:2003
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced (FOREIGN STANDARD)
DIN EN 1871:2000
Road marking materials - Physical properties; English version of DIN EN 1871 (FOREIGN STANDARD)
DIN EN 1824:1998
Road marking materials - Road trials (FOREIGN STANDARD)
DIN EN 1790:1998
Road marking materials - Preformed road markings (FOREIGN STANDARD)
DIN EN 1671:1997
Pressure sewerage systems outside buildings (FOREIGN STANDARD)
DIN EN 1610:1997
Construction and testing of drains and sewers (FOREIGN STANDARD)
DIN EN 15626:2009
Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method; German version EN 15626:2009 (Foreign Standard)
DIN EN 1538:2000
Execution of special geotechnical works - Diaphragm walls; English version of DIN EN 1538 (FOREIGN STANDARD)
DIN EN 1537:2001
Execution of special geotechnical works - Ground anchors; English version of DIN EN 1537:1999 + AC:2000 (FOREIGN STANDARD)
DIN EN 1536:1999
Execution of special geotechnical work - Bored piles (FOREIGN STANDARD)
DIN EN 15237:2007
Execution of special geotechnical works - Vertical drainage; German version EN 15237:2007 (FOREIGN STANDARD)
DIN EN 1508:1998
Water supply - Requirements for systems and components for the storage of water (FOREIGN STANDARD)
DIN EN 14991:2007
Precast concrete products - Foundation elements; German version EN 14991:2007 (FOREIGN STANDARD)
DIN EN 14982:2006
Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness; German version EN 14982:2006 (FOREIGN STANDARD)
DIN EN 14840:2005
Joint fillers and sealants - Test methods for preformed joint seals (FOREIGN STANDARD)
DIN EN 14830:2007
Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance; German version EN 14830:2006 (FOREIGN STANDARD)
DIN EN 14802:2006
Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (FOREIGN STANDARD)
DIN EN 14801:2006
Conditions for pressure classification of products for water and wastewater pipelines; German version EN 14801:2006 (FOREIGN STANDARD)
DIN EN 14758-1:2009
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005+A1:2009 (Foreign Standard)
DIN EN 14731:2005
Execution of special geotechnical works - Ground treatment by deep vibration (FOREIGN STANDARD)
DIN EN 14679 Berichtigung 1:2006
Execution of special geotechnical works - Deep mixing; German version EN 14679:2005, Corrigenda to DIN EN 14679:2005-07; German version EN 14679:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 14679:2005
Execution of special geotechnical works - Deep mixing (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14654-1:2005
Management and control of cleaning operations in drains and sewers - Part 1: Sewer cleaning (FOREIGN STANDARD)
DIN EN 14653-2:2005
Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test (FOREIGN STANDARD)
DIN EN 14653-1:2005
Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications (FOREIGN STANDARD)
DIN EN 1463-2:2000
Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications; English version of DIN EN 1463-2 (FOREIGN STANDARD)
DIN EN 1463-1:2009
Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements; German version EN 1463-1:2009 (Foreign Standard)
DIN EN 14504:2009
Inland navigation vessels - Floating landing stages - Requirements, tests; German version EN 14504:2009 (Foreign Standard)
DIN EN 14475:2006
Execution of special geotechnical works - Reinforced fill (FOREIGN STANDARD)
DIN EN 14457:2004
General requirements for components specifically designed for use in trenchless construction of drains and sewers (FOREIGN STANDARD)
DIN EN 14389-1:2008
Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics; German version EN 14389-1:2007 (FOREIGN STANDARD)
DIN EN 14388 Berichtigung 1:2008
Road traffic noise reducing devices - Specifications; German version EN 14388:2005, Corrigendum to DIN EN 14388:2005-10; German version EN 14388:2005/AC:2008 (Foreign Standard)
DIN EN 14388:2005
Road traffic noise reducing devices - Specifications (FOREIGN STANDARD)
DIN EN 1437:2002
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (FOREIGN STANDARD)
DIN EN 14364:2009
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006+A1:2008 (For
DIN EN 1436:2009
Road marking materials - Road marking performance for road users; German version EN 1436:2007+A1:2008 (Foreign Standard)
DIN EN 1433:2005
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity (FOREIGN STANDARD)
DIN EN 1424:2003
Road marking materials - Premix glass beads (includes Amendment A1:2003) (FOREIGN STANDARD)
DIN EN 14227-14:2006
Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash; German version EN 14227-14:2006 (FOREIGN STANDARD)
DIN EN 14227-13:2006
Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder; German version EN 14227-13:2006 (FOREIGN STANDARD)
DIN EN 14227-12:2006
Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag; German version EN 14227-12:2006 (FOREIGN STANDARD)
DIN EN 14227-11:2006
Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime; German version EN 14227-11:2006 (FOREIGN STANDARD)
DIN EN 14227-10:2006
Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement; German version EN 14227-10:2006 (FOREIGN STANDARD)
DIN EN 14227-1:2004
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures (FOREIGN STANDARD)
DIN EN 14199:2005
Execution of special geotechnical works - Micropiles (FOREIGN STANDARD)
DIN EN 14188-3:2006
Joint fillers and sealants - Part 3: Specifications for preformed joint seals; German version EN 14188-3:2006 (FOREIGN STANDARD)
DIN EN 14188-1:2004
Joint fillers and sealants - Part 1: Specifications for hot applied sealants (FOREIGN STANDARD)
DIN EN 14187-9:2006
Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants; German version EN 14187-9:2006 (FOREIGN STANDARD)
DIN EN 14187-8:2003
Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-radiation (FOREIGN STANDARD)
DIN EN 14187-6:2003
Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemicals liquids (FOREIGN STANDARD)
DIN EN 14187-5:2003
Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis (FOREIGN STANDARD)
DIN EN 14187-4:2003
Cold applied sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel (FOREIGN STANDARD)
DIN EN 14187-3:2003
Cold applied sealants - Part 3: Test method for the determination of self-levelling properties (FOREIGN STANDARD)
DIN EN 14187-2:2003
Cold applied sealants - Part 2: Test method for the determination of tack free time (FOREIGN STANDARD)
DIN EN 14187-1:2003
Cold applied sealants - Part 1: Test method for the determination of rate of cure (FOREIGN STANDARD)
DIN EN 14023:2006
Bitumen and bituminous binders - Framework specification for polymer modified bitumens (FOREIGN STANDARD)
DIN EN 13924:2006
Bitumen and bituminous binders - Specifications for hard paving grade bitumens; German version EN 13924:2006 (FOREIGN STANDARD)
DIN EN 13880-9:2003
Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements (FOREIGN STANDARD)
DIN EN 13880-8:2003
Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion (FOREIGN STANDARD)
DIN EN 13880-7:2003
Hot applied joint sealants - Part 7: Function testing of joint sealants (FOREIGN STANDARD)
DIN EN 13880-6:2004
Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing (FOREIGN STANDARD)
DIN EN 13880-5:2004
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance (FOREIGN STANDARD)
DIN EN 13880-4:2003
Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value (FOREIGN STANDARD)
DIN EN 13880-3:2003
Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience) (FOREIGN STANDARD)
DIN EN 13880-2:2003
Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 ?C (FOREIGN STANDARD)
DIN EN 13880-13:2003
Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test) (FOREIGN STANDARD)
DIN EN 13880-12:2003
Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods) (FOREIGN STANDARD)
DIN EN 13880-11:2003
Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements (FOREIGN STANDARD)
DIN EN 13880-10:2003
Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression (FOREIGN STANDARD)
DIN EN 13880-1:2003
Hot applied joint sealants - Part 1: Test method for the determination of density at 25 ?C (FOREIGN STANDARD)
DIN EN 13877-3:2005
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements (FOREIGN STANDARD)
DIN EN 13877-2:2004
Concrete pavements - Part 2: Functional requirements for concrete pavements (FOREIGN STANDARD)
DIN EN 13877-1:2004
Concrete pavements - Part 1: Materials (FOREIGN STANDARD)
DIN EN 13863-4:2005
Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres (FOREIGN STANDARD)
DIN EN 13863-3:2005
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores (FOREIGN STANDARD)
DIN EN 13863-2:2004
Concrete pavements - Part 2: Test method for the determination of the bond between two layers (FOREIGN STANDARD)
DIN EN 13863-1:2004
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method (FOREIGN STANDARD)
DIN EN 13848-5:2008
Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels; German version EN 13848-5:2008 (FOREIGN STANDARD)
DIN EN 13848-2:2006
Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles; German version EN 13848-2:2006 (FOREIGN STANDARD)
DIN EN 13848-1:2008
Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry; German version EN 13848-1:2003+A1:2008 (Foreign Standard)
DIN EN 13803-2:2008
Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature; German ver (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13674-4:2006
Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m; German version EN 13674-4:2006 (FOREIGN STANDARD)
DIN EN 13674-3:2006
Railway applications - Track - Rail - Part 3: Check rails; German version EN 13674-3:2006 (FOREIGN STANDARD)
DIN EN 13674-2:2006
Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above; German version EN 13674-2:2006 (FOREIGN STANDARD)
DIN EN 13598-2:2009
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic areas and deep under
DIN EN 13598-1:2003
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings includin (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13566-7:2007
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes; German version EN 13566-7:2007 (FOREIGN STANDARD)
DIN EN 13566-4:2003
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (FOREIGN STANDARD)
DIN EN 13566-3:2003
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (FOREIGN STANDARD)
DIN EN 13566-2:2006
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (FOREIGN STANDARD)
DIN EN 13566-1:2003
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (FOREIGN STANDARD)
DIN EN 13508-2 Berichtigung 1:2007
Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system; German version EN 13508-2:2003, Corrigenda to DIN EN 13508-2:2003-09; German version EN 13508-2:2003/AC:2007 (FOREIGN STANDARD)
DIN EN 13508-2:2003
Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system (FOREIGN STANDARD)
DIN EN 13508-1:2004
Condition of drain and sewer systems outside buildings - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 13481-8:2006
Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads; German version EN 13481-8:2006 (FOREIGN STANDARD)
DIN EN 13481-7:2007
Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails; German version EN 13481-7:2003 + A1:2006 (FOREIGN STANDARD)
DIN EN 13481-5:2007
Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track; German version EN 13481-5:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 13481-4:2007
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers; German version EN 13481-4:2002 + AC:2004 + A1:2006 (FOREIGN STANDARD)
DIN EN 13481-3:2007
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers; German version EN 13481-3:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 13481-2:2007
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers; German version EN 13481-2:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 13476-3:2009
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth
DIN EN 13476-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specificatio (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13476-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1344:2002
Clay pavers - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1343:2002
Kerbs of natural stone for external paving - Requirements and test methods; English version of DIN EN 1343 (FOREIGN STANDARD)
DIN EN 1342:2002
Setts of natural stone for external paving - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1341 Berichtigung 1:2006
Slabs of natural stone for external paving - Requirements and test methods; German version EN 1341:2001, Corrigenda to DIN EN 1341:2002-04 (FOREIGN STANDARD)
DIN EN 1341:2002
Slabs of natural stone for external paving - Requirements and test methods; English version of DIN EN 1341 (FOREIGN STANDARD)
DIN EN 1340 Berichtigung 1:2006
Concrete kerb units; Requirements and test methods; German version EN 1340:2003, Corrigenda to DIN EN 1340:2003-08; German version EN 1340:2003/AC:2006 (FOREIGN STANDARD)
DIN EN 1340:2003
Concrete kerb units - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1339 Berichtigung 1:2006
Concrete paving flags - Requirements and test methods; German version EN 1339:2003, Corrigenda to DIN EN 1339:2003-08; German version EN 1339:2003/AC:2006 (FOREIGN STANDARD)
DIN EN 1339:2003
Concrete paving flags - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13380:2001
General requirements for components used for renovation and repair of drain and sewer systems outside buildings; English version of DIN EN 13380 (FOREIGN STANDARD)
DIN EN 1338 Berichtigung 1:2006
Concrete paving blocks - Requirements and test methods; German version EN 1338:2003, Corrigenda to DIN EN 1338:2003-08; German version EN 1338:2003/AC:2006 (FOREIGN STANDARD)
DIN EN 1338:2003
Concrete paving blocks - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13331-2:2002
Trench lining systems - Part 2: Assessment by calculation or test (FOREIGN STANDARD)
DIN EN 13331-1:2002
Trench lining systems - Part 1: Product specifications (FOREIGN STANDARD)
DIN EN 13286-7:2004
Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures (FOREIGN STANDARD)
DIN EN 13286-53:2005
Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression (FOREIGN STANDARD)
DIN EN 13286-52:2005
Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression (FOREIGN STANDARD)
DIN EN 13286-51:2005
Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction (FOREIGN STANDARD)
DIN EN 13286-50:2005
Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction (FOREIGN STANDARD)
DIN EN 13286-5:2003
Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table (FOREIGN STANDARD)
DIN EN 13286-49:2004
Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder (FOREIGN STANDARD)
DIN EN 13286-48:2005
Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation (FOREIGN STANDARD)
DIN EN 13286-47:2004
Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling (FOREIGN STANDARD)
DIN EN 13286-46:2003
Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value (FOREIGN STANDARD)
DIN EN 13286-45:2004
Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures (FOREIGN STANDARD)
DIN EN 13286-44:2003
Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag (FOREIGN STANDARD)
DIN EN 13286-43:2003
Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures (FOREIGN STANDARD)
DIN EN 13286-42:2003
Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures (FOREIGN STANDARD)
DIN EN 13286-41:2003
Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures (FOREIGN STANDARD)
DIN EN 13286-40:2003
Unbound and hydraulically bound mixtures - Part 40: Test method for determination of the direct tensile strength of hydraulically bound mixtures (FOREIGN STANDARD)
DIN EN 13286-4:2003
Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content; Vibrating hammer (FOREIGN STANDARD)
DIN EN 13286-3:2003
Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters (FOREIGN STANDARD)
DIN EN 13286-2:2004
Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction (FOREIGN STANDARD)
DIN EN 13286-1:2003
Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; Introduction, general requirements and sampling (FOREIGN STANDARD)
DIN EN 13285:2003
Unbound mixtures - Specification (FOREIGN STANDARD)
DIN EN 13244-5:2003
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system (FOREIGN STANDARD)
DIN EN 13244-1:2003
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General (FOREIGN STANDARD)
DIN EN 13231-3:2006
Railway applications - Track - Acceptance of works - Part 3: Acceptance of rail grinding, milling and planing work in track; German version EN 13231-3:2006 (FOREIGN STANDARD)
DIN EN 13231-2:2006
Railway applications - Track - Acceptance of works - Part 2: Works on ballasted track - Switches and crossings; German version EN 13231-2:2006 (FOREIGN STANDARD)
DIN EN 13231-1:2006
Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line; German version EN 13231-1:2006 (FOREIGN STANDARD)
DIN EN 13212:2001
Road marking materials - Requirements for factory production control; English version of DIN EN 13212 (FOREIGN STANDARD)
DIN EN 13201-4:2004
Road lighting - Part 4: Methods of measuring lighting performance (FOREIGN STANDARD)
DIN EN 13201-3 Berichtigung 1:2007
Road lighting - Part 3: Calculation of performance; German version EN 13201-3:2003, Corrigenda to DIN EN 13201-3:2004-04; German version EN 13201-3:2003/AC:2007 (FOREIGN STANDARD)
DIN EN 13201-3:2004
Road lighting - Part 3: Calculation of performance (FOREIGN STANDARD)
DIN EN 13201-2:2004
Road lighting - Part 2: Performance requirements (FOREIGN STANDARD)
DIN EN 13197:2001
Road marking materials - Wear simulators; English version of DIN EN 13197 (FOREIGN STANDARD)
DIN EN 13146-8:2007
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 13146-7:2003
Railway applications - Track; Test methods for fastening systems - Part 7: Determination of clamping force (FOREIGN STANDARD)
DIN EN 13146-5:2003
Railway applications - Track; Test methods for fastening systems - Part 5: Determination of electrical resistance (FOREIGN STANDARD)
DIN EN 13146-4:2007
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading; German version EN 13146-4:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 13146-3:2003
Railway applications - Track; Test methods for fastening systems - Part 3: Determination of attenuation of impact loads (FOREIGN STANDARD)
DIN EN 13146-2:2003
Railway applications - Track; Test methods for fastening systems - Part 2: Determination of torsional resistance (FOREIGN STANDARD)
DIN EN 13146-1:2003
Railway applications - Track; Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint (FOREIGN STANDARD)
DIN EN 13108-8:2006
Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt (FOREIGN STANDARD)
DIN EN 13108-7 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt; German version EN 13108-7:2006; Corrigendum to DIN EN 13108-7:2006-08; German version EN 13108-7:2006/AC:2008 (Foreign Standard)
DIN EN 13108-7:2006
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt; German version EN 13108-7:2006 (FOREIGN STANDARD)
DIN EN 13108-6 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt; German version EN 13108-6:2006; Corrigendum to DIN EN 13108-6:2006-08; German version EN 13108-6:2006/AC:2008 (Foreign Standard)
DIN EN 13108-6:2006
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt; German version EN 13108-6:2006 (FOREIGN STANDARD)
DIN EN 13108-5 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt; German version EN 13108-5:2006; Corrigendum to DIN EN 13108-5:2006-08; German version EN 13108-5:2006/AC:2008 (Foreign Standard)
DIN EN 13108-5:2006
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt; German version EN 13108-5:2006 (FOREIGN STANDARD)
DIN EN 13108-4 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt; German version EN 13108-4:2006; Corrigendum to DIN EN 13108-4:2006-08; German version EN 13108-4:2006/AC:2008 (Foreign Standard)
DIN EN 13108-4:2006
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt; German version EN 13108-4:2006 (FOREIGN STANDARD)
DIN EN 13108-3 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt; German version EN 13108-3:2006; Corrigendum to DIN EN 13108-3:2006-08; German version EN 13108-3:2006/AC:2008 (Foreign Standard)
DIN EN 13108-3:2006
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt; German version EN 13108-3:2006 (FOREIGN STANDARD)
DIN EN 13108-20 Berichtigung 1:2009
Bituminous mixtures - Material specifications - Part 20: Type Testing; German version EN 13108-20:2006, Corrigendum to DIN EN 13108-20:2006-07; German version EN 13108-20:2006/AC:2008 (Foreign Standard)
DIN EN 13108-20:2006
Bituminous mixtures - Material specifications - Part 20: Type Testing; German version EN 13108-20:2006 (FOREIGN STANDARD)
DIN EN 13108-2 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers; German version EN 13108-2:2006; Corrigendum to DIN EN 13108-2:2006-08; German version EN 13108-2:2006/AC:2008 (Foreign Standard)
DIN EN 13108-2:2006
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers; German version EN 13108-2:2006 (FOREIGN STANDARD)
DIN EN 13108-1 Berichtigung 1:2008
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2006; Corrigendum to DIN EN 13108-1:2006-08; German version EN 13108-1:2006/AC:2008 (Foreign Standard)
DIN EN 13108-1:2006
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2006 (FOREIGN STANDARD)
DIN EN 13036-8:2008
Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness indices; German version EN 13036-8:2008 (FOREIGN STANDARD)
DIN EN 13036-6:2008
Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges; German version EN 13036-6:2008 (FOREIGN STANDARD)
DIN EN 13036-3:2003
Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability (FOREIGN STANDARD)
DIN EN 12966-3:2005
Road vertical signs - Variable message traffic signs - Part 3: Factory production control (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 12966-2:2005
Road vertical signs - Variable message traffic signs - Part 2: Initial type testing (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 12966-1:2005
Road vertical signs - Variable message traffic signs - Part 1: Product standard (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1293:1999
General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers (FOREIGN STANDARD)
DIN EN 12899-5:2008
Fixed, vertical road traffic signs - Part 5: Initial type testing; German version EN 12899-5:2007 (FOREIGN STANDARD)
DIN EN 12899-4:2008
Fixed, vertical road traffic signs - Part 4: Factory production control; German version EN 12899-4:2007 (FOREIGN STANDARD)
DIN EN 12899-3:2008
Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors; German version EN 12899-3:2007 (FOREIGN STANDARD)
DIN EN 12899-2:2008
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB); German version EN 12899-2:2007 (FOREIGN STANDARD)
DIN EN 12899-1:2008
Fixed, vertical road traffic signs - Part 1: Fixed signs; German version EN 12899-1:2007 (FOREIGN STANDARD)
DIN EN 12889:2000
Trenchless contruction and testing of drains and sewers; English version of DIN EN 12889 (FOREIGN STANDARD)
DIN EN 12802:2000
Road marking materials - Laboratory methods for identification; English version of DIN EN 12802 (FOREIGN STANDARD)
DIN EN 12767:2008
Passive safety of support structures for road equipment - Requirements, classification and test methods; German version EN 12767:2007 (FOREIGN STANDARD)
DIN EN 12716:2001
Execution of special geotechnical works - Jet grouting; English version of DIN EN 12716 (FOREIGN STANDARD)
DIN EN 12715:2000
Execution of special geotechnical work - Grouting; English version of DIN EN 12715 (FOREIGN STANDARD)
DIN EN 12699:2001
Execution of special geotechnical work - Displacement piles; English version of DIN EN 12699 (FOREIGN STANDARD)
DIN EN 12697-9:2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the reference density (FOREIGN STANDARD)
DIN EN 12697-8:2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of voids characteristics of bituminous specimens (FOREIGN STANDARD)
DIN EN 12697-7:2002
Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays (FOREIGN STANDARD)
DIN EN 12697-6:2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 12697-43:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel (FOREIGN STANDARD)
DIN EN 12697-42:2006
Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt (FOREIGN STANDARD)
DIN EN 12697-41:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids (FOREIGN STANDARD)
DIN EN 12697-40:2006
Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability (FOREIGN STANDARD)
DIN EN 12697-4:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column EN 12697-4:2005 (FOREIGN STANDARD)
DIN EN 12697-39:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition (FOREIGN STANDARD)
DIN EN 12697-38:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration (FOREIGN STANDARD)
DIN EN 12697-37:2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA (FOREIGN STANDARD)
DIN EN 12697-36:2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement (FOREIGN STANDARD)
DIN EN 12697-33:2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor; German version EN 12697-33:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 12697-32:2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor; German version EN 12697-32:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 12697-31:2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor; German version EN 12697-31:2007 (FOREIGN STANDARD)
DIN EN 12697-3:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator (FOREIGN STANDARD)
DIN EN 12697-29:2002
Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen (FOREIGN STANDARD)
DIN EN 12697-28:2001
Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading; English version of DIN EN 12697-28 (FOREIGN STANDARD)
DIN EN 12697-27:2001
Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling; English version of DIN EN 12697-27 (FOREIGN STANDARD)
DIN EN 12697-26:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness (FOREIGN STANDARD)
DIN EN 12697-25:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 12697-24:2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue; German version EN 12697-24:2004+A1:2007 (FOREIGN STANDARD)
DIN EN 12697-23:2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens (FOREIGN STANDARD)
DIN EN 12697-22:2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking; German version EN 12697-22:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 12697-21:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens (FOREIGN STANDARD)
DIN EN 12697-20:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or Marshall specimens (FOREIGN STANDARD)
DIN EN 12697-18:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage (FOREIGN STANDARD)
DIN EN 12697-16:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres (FOREIGN STANDARD)
DIN EN 12697-15:2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity (FOREIGN STANDARD)
DIN EN 12697-14:2001
Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content; English version of DIN EN 12697-14 (FOREIGN STANDARD)
DIN EN 12697-12:2008
Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens; German version EN 12697-12:2008 (Foreign Standard)
DIN EN 12697-11:2005
Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen (FOREIGN STANDARD)
DIN EN 12697-10:2002
Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability; English version of DIN EN 12697-10 (FOREIGN STANDARD)
DIN EN 12697-1:2006
Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content (FOREIGN STANDARD)
DIN EN 12676-2:2000
Anti-glare systems for roads - Part 2: Test methods; English version ofDIN EN 12676-2 (FOREIGN STANDARD)
DIN EN 12676-1:2003
Anti-glare systems for roads - Part 1: Performance and characteristics (includes Amendment A1:2003) (FOREIGN STANDARD)
DIN EN 12675:2000
Traffic signal controllers - Functional safety requirements; English version of DIN EN 12675 (FOREIGN STANDARD)
DIN EN 124:1994
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking and quality control (FOREIGN STANDARD)
DIN EN 12368:2006
Traffic control equipment - Signal heads; German version EN 12368:2006 (FOREIGN STANDARD)
DIN EN 12352:2006
Traffic control equipment - Warning and safety light devices; German version EN 12352:2006 (FOREIGN STANDARD)
DIN EN 12274-8:2005
Slurry surfacing - Test methods - Part 8: Visual assessment of defects (FOREIGN STANDARD)
DIN EN 12274-7:2005
Slurry surfacing - Part 7: Shaking abrasion test (FOREIGN STANDARD)
DIN EN 12274-6:2002
Slurry surfacing - Test methods - Part 6: Rate of application; English of DIN EN 12274-6 (FOREIGN STANDARD)
DIN EN 12274-5:2003
Slurry surfacing - Test method - Part 5: Determination of wearing (FOREIGN STANDARD)
DIN EN 12274-4:2003
Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix (FOREIGN STANDARD)
DIN EN 12274-3:2002
Slurry surfacing - Test method - Part 3: Consistency; English version of DIN EN 12274-3 (FOREIGN STANDARD)
DIN EN 12274-2:2003
Slurry surfacing - Test methods - Part 2: Determination of residual binder content (FOREIGN STANDARD)
DIN EN 12274-1:2002
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction; English version of DIN EN 12274-1 (FOREIGN STANDARD)
DIN EN 12273:2008
Slurry surfacing - Requirements; German version EN 12273:2008 (FOREIGN STANDARD)
DIN EN 12272-3:2003
Surface dressing - Test methods - Part 3: Determination of binder aggregate adhesivity by the vialit plate shock test method (FOREIGN STANDARD)
DIN EN 12272-2:2003
Surface dressing - Test methods - Part 2: Visual assessment of defects (FOREIGN STANDARD)
DIN EN 12272-1:2002
Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings (FOREIGN STANDARD)
DIN EN 12271:2007
Surface dressing - Requirements; German version EN 12271:2006 (FOREIGN STANDARD)
DIN EN 12063:1999
Execution of special geotechnical work - Sheet-pile walls (FOREIGN STANDARD)
DIN EN 1123-2:2007
Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:2006 (Foreign Standard)
DIN EN 1091:1997
Vacuum sewerage systems outside buildings (FOREIGN STANDARD)
DIN 52027:2003
Testing of carbonaceous materials - Distillation of refined coal tars (FOREIGN STANDARD)
DIN 4926:1995
DN 400 to DN 1200 steel well tops (FOREIGN STANDARD)
DIN 4922-4:1999
Steel water well filter pipes - Part 4: DN 100 to DN 500 pipe joint assemblies with joints resistant to axial thrust (FOREIGN STANDARD)
DIN 4922-3:1975
Steel Filter Pipes for Drilled Wells; Flanged Connection, NW 500 to NW 1000 (Nominal Diameter 500 to 1000) (FOREIGN STANDARD)
DIN 4922-2:1981
Steel Filter Pipes for Drilled Wells with Screwed Connection DN 100 to DN 500 (FOREIGN STANDARD)
DIN 4922-1:1978
Steel Filter Pipes for Drilled Wells with Slot Perforation and Fisching (Butt Strap Joint) (FOREIGN STANDARD)
DIN 482:2002
Natural stone kerbs (FOREIGN STANDARD)
DIN 4271-3:1998
Class B 125 manhole tops - Covers (FOREIGN STANDARD)
DIN 4271-2:1998
Class B 125 manhole tops - Frames (FOREIGN STANDARD)
DIN 4271-1:1998
Class B 125 manhole tops - Assembly (FOREIGN STANDARD)
DIN 4127:1986
Earthworks and foundation engineering; diaphragm wall clays for supporting liquids; requirements, testing, supply, inspection (FOREIGN STANDARD)
DIN 4126:1986
Cast-in-situ concrete diaphragm walls; design and construction (FOREIGN STANDARD)
DIN 4107:1978
Suboil; Settlement observations during and after construction of structures (FOREIGN STANDARD)
DIN 4095:1990
Planning, design and installation of drainage systems protecting structures against water in the ground (FOREIGN STANDARD)
DIN 4093:1987
Ground treatment by grouting; planning, grouting procedure and testing (FOREIGN STANDARD)
DIN 4084 Beiblatt 2:1983
Subsoil; calculations of terrain failure and slope failure; examples of calculation (FOREIGN STANDARD)
DIN 4084 Beiblatt 1:1981
Subsoil; Calculations of terrain rupture and slope rupture; Explanations (FOREIGN STANDARD)
DIN 4034-2:1990
Precast unreinforced and reinforced concrete components for well shafts and soakaways; dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 4034-10:1995
Precast unreinforced and reinforced concrete manholes and inspection chambers - Part 10: Brick bottom shaft sections for buried drains and sewers - Requirements and testing (FOREIGN STANDARD)
DIN 4019-2 Beiblatt 1:1981
Subsoil; Settlement calculations in the case of inclined and eccentrically acting loading; Explanations and examples of calculation (FOREIGN STANDARD)
DIN 4019-2:1981
Subsoil; Settlement Calculations in the Case of Inclined and Eccentrically Acting Loading (FOREIGN STANDARD)
DIN 4019-1:1979
Subsoil; Settlement Calculations for Perpendicular Central Loading (FOREIGN STANDARD)
DIN 4018:1974
Subsoil; Calculation of the Bearing Pressure Distribution under Spread Foundations (FOREIGN STANDARD)
DIN 1996-5:1983
Testing of bituminous materials for road building and related purposes; Determination of water content (FOREIGN STANDARD)
DIN 1996-2:1971
Testing of Bituminous Materials for Road Building and Related Purposes; Sampling (FOREIGN STANDARD)
DIN 1996-19:1984
Testing of asphalt; determination of extensibility and adhesion using a Rabe joint model (FOREIGN STANDARD)
DIN 1996-18:1989
Testing of asphalt; Herrmann falling ball test (FOREIGN STANDARD)
DIN 1996-16:1975
Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Segregation Tendency (FOREIGN STANDARD)
DIN 1996-15:1975
Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Softening Point in accordance with Wilhelmi (FOREIGN STANDARD)
DIN 1996-11:1981
Testing of bituminous materials for road building and related purposes; Determination of Marshall stability and of Marshall flow value (FOREIGN STANDARD)
DIN 1996-1:1974
Testing of Bituminous Materials for Road Building and Related Purposes; General, Synopsis and Indications Relating to the Evaluation of the Tests (FOREIGN STANDARD)
DIN 1988-7:2004
Turnbuckles made from steel tubes or round steel bars (FOREIGN STANDARD)
DIN 1988-3:1988
Drinking water supply systems; pipe sizing (DVGW code of practice) (FOREIGN STANDARD)
DIN 1988-2:1988
Drinking water supply systems; materials, components, appliances, design and installation (DVGW code of practice) (FOREIGN STANDARD)
DIN 1988-1:1988
Drinking water supply systems; general (DVGW code of practice) (FOREIGN STANDARD)
DIN 19850-3:1990
Fibre-cement manholes for use in sewerage systems; dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 19702:1992
Stability of solid hydraulic structures (FOREIGN STANDARD)
DIN 19657:1973
Protection of Watercourses, Dikes, and Coastal Dunes; Guidelines (FOREIGN STANDARD)
DIN 19584-2:1997
Class D 400 manhole tops - Part 2: Components (FOREIGN STANDARD)
DIN 19584-1:1996
Class D 400 manhole tops - Part 1: Assembly (FOREIGN STANDARD)
DIN 19583-2:1996
Classes C 250 and D 400 gully tops of size 500 x 500 - Part 2: Components (FOREIGN STANDARD)
DIN 19583-1:1996
Classes C 250 and D 400 gully tops of size 500 x 500 - Part 1: Assembly (FOREIGN STANDARD)
DIN 19571-2:1997
Curved class C 250 gully tops of size 500 x 500 - Part 2: Components (FOREIGN STANDARD)
DIN 19571-1:1997
Curved class C 250 gully tops of size 500 x 500 - Part 1: Assembly (FOREIGN STANDARD)
DIN 19565-5:1990
Prefabricated glass fibre reinforced plastic (UP-GF) manholes for use in sewerage systems; dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 19537-3:1990
Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 18809:1987
Steel road bridges and foot bridges; design and construction (FOREIGN STANDARD)
DIN 18137-2:1990
Determination of the shear strength parameters of soil by the triaxial test (FOREIGN STANDARD)
DIN 18137-1:1990
Determination of shear strength of soil - Terminologie and general requirements for testing (FOREIGN STANDARD)
DIN 18134:2001
Determining the deformation and strength characteristics of soil by the plate loading test (FOREIGN STANDARD)
DIN 18130-1:1998
Laboratory tests for determining the coefficient of permeability of soil (FOREIGN STANDARD)
DIN 18129:1996
Soil, investigation and testing - Determination of lime content (FOREIGN STANDARD)
DIN 18128:2002
Determination the ignition loss of soil (FOREIGN STANDARD)
DIN 18127:1997
Determination of dry density/moisture content relationship (Proctor test) (FOREIGN STANDARD)
DIN 18126:1996
Determination of minimum and maximum dry densities of non-cohesive soil (FOREIGN STANDARD)
DIN 18125-2:1999
Field tests for determination of soil density (FOREIGN STANDARD)
DIN 18124:1997
Determination of particle density of soil using pyknometers (FOREIGN STANDARD)
DIN 18123:1996
Determination of particle size distribution of soil (FOREIGN STANDARD)
DIN 18122-2:2000
Determining the shrinkage limit of soil (FOREIGN STANDARD)
DIN 18122-1:1997
Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit (FOREIGN STANDARD)
DIN 18121-2:2001
Determining the moisture contentof soil by rapid methods (FOREIGN STANDARD)
DIN 18121-1:1998
Determination of water content of soil by the oven-drying method (FOREIGN STANDARD)
DIN 1239:1999
Covers for well tops and other water supply structures - Design requiremements (FOREIGN STANDARD)
DIN 1236-3:1981
Classes A and B concrete elements and buckets for gullies; Buckets (FOREIGN STANDARD)
DIN 1236-2:1981
Classe A and class B concrete elements and buckets for gullies; Concrete elements (FOREIGN STANDARD)
DIN 1236-1:1981
Class A and class B concrete elements and buckets for gullies; Design; installation and assemblies (FOREIGN STANDARD)
DIN 1076:1999
Highway structures - Testing and inspection (FOREIGN STANDARD)
DIN 1075:1981
Concrete bridges; Dimensioning and construction (FOREIGN STANDARD)
DIN 1072:1985
Road and foot bridges; design loads (FOREIGN STANDARD)
DIN 1054 Berichtigung 4:2008
Subsoil - Verification of the safety of earthworks and foundations, Corrigendum to DIN 1054:2005-01 (Foreign Standard)
DIN 1054:2005
Subsoil - Verification of the safety of earthworks and foundations (FOREIGN STANDARD)
DIN EN 959:2007
Mountaineering equipment - Rock anchors - Safety requirements and test methods; German version EN 959:2007 (FOREIGN STANDARD)
DIN EN 958:2007
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods; German version EN 958:2006 (FOREIGN STANDARD)
DIN EN 957-9:2003
Stationary training equipment - Part 9: Elliptical trainers; Additional specific safety requirements and test methods (FOREIGN STANDARD)
DIN EN 957-8:1998
training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (FOREIGN STANDARD)
DIN EN 957-7:1998
Stationary training equipment - Part 7: Rowing machines - Additional specific safety requirements and test methods (FOREIGN STANDARD)
DIN EN 957-6:2001
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods; English version of DIN EN 957-6 (FOREIGN STANDARD)
DIN EN 957-5:2009
Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods; German version EN 957-5:2009 (Foreign Standard)
DIN EN 957-4:2006
Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods; German version EN 957-4:2006 (FOREIGN STANDARD)
DIN EN 957-10:2005
Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods (FOREIGN STANDARD)
DIN EN 957-1:2005
Stationary training equipment - Part 1: General safety requirements and test methods (FOREIGN STANDARD)
DIN EN 926-1:2006
Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength; German version EN 926-1:2006 (FOREIGN STANDARD)
DIN EN 915:2009
Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety; German version EN 915:2008 (Foreign Standard)
DIN EN 914:2009
Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety; German version EN 914:2008 (Foreign Standard)
DIN EN 913:2009
Gymnastic equipment - General safety requirements and test methods; German version EN 913:2008 (Foreign Standard)
DIN EN 893:1999
Mountaineering equipment - Crampons - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 892:2005
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 750:2006
Playing field equipment - Hockey goals - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 749:2006
Playing field equipment - Handball goals - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 748:2006
Playing field equipment - Football goals - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 747-2:2007
Furniture - Bunk beds and high beds for domestic use - Part 2: Test methods; German version EN 747-2:2007 (FOREIGN STANDARD)
DIN EN 747-1:2007
Furniture - Bunk beds and high beds for domestic use - Part 1: Safety, strength and durability requirements; German version EN 747-1:2007 (FOREIGN STANDARD)
DIN EN 732:1999
Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators (FOREIGN STANDARD)
DIN EN 71-9:2007
Safety of toys - Part 9: Organic chemical compounds - Requirements; German version EN 71-9:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 71-8:2006
Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use; German version EN 71-8:2003 + A1:2006 + A2:2005 (FOREIGN STANDARD)
DIN EN 718:1996
Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings (FOREIGN STANDARD)
DIN EN 71-7:2002
Safety of toys - Part 7: Finger paints; Requirements and test methods (FOREIGN STANDARD)
DIN EN 716-2:2008
Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods; German version EN 716-2:2008 (FOREIGN STANDARD)
DIN EN 716-1:2008
Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements; German version EN 716-1:2008 (Foreign Standard)
DIN EN 71-5:1993
Safety of toys; part 5: chemical toys (sets) other than experimental sets (FOREIGN STANDARD)
DIN EN 71-5/A1:2006
Safety of toys - Part 5: Chemical toys (sets) other than experimental sets (FOREIGN STANDARD)
DIN EN 71-4/A3:2007
Safety of toys - Part 4: Experimental sets for chemistry and related activities; German version EN 71-4:1990/A3:2007 (FOREIGN STANDARD)
DIN EN 71-4/A2:2003
Safety of toys - Part 4: Experimental sets for chemistry and related activities (FOREIGN STANDARD)
DIN EN 71-3:2002
Safety of toys - Part 3: Migration of certain elements (includes Amendment A1:2002 + Corrigendum AC:2002) (FOREIGN STANDARD)
DIN EN 71-11:2006
Safety of toys - Part 11: Organic chemical compounds - Methods of analysis (FOREIGN STANDARD)
DIN EN 71-10:2006
Safety of toys - Part 10: Organic chemical compounds - Sample preparation and extraction (FOREIGN STANDARD)
DIN EN 71-1:2008
Safety of toys - Part 1: Mechanical and physical properties; German version EN 71-1:2005+A6:2008 (Foreign Standard)
DIN EN 688:1997
Resilient floor coverings - Specification for corklinoleum (FOREIGN STANDARD)
DIN EN 687:1997
Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing (FOREIGN STANDARD)
DIN EN 686:1997
Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing (FOREIGN STANDARD)
DIN EN 684:1996
Resilient floor coverings - Determination of seam strength (FOREIGN STANDARD)
DIN EN 670:1997
Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue (FOREIGN STANDARD)
DIN EN 669:1997
Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity (FOREIGN STANDARD)
DIN EN 666:1995
Resilient floor coverings - Determination of gelling (FOREIGN STANDARD)
DIN EN 665:1995
Resilient floor coverings - Determination of exudation of plasticizers (FOREIGN STANDARD)
DIN EN 664:1995
Resilient floor coverings - Determination of volatile loss (FOREIGN STANDARD)
DIN EN 663:1995
Resilient floor coverings - Determination of conventional pattern depth (FOREIGN STANDARD)
DIN EN 662:1995
Resilient floor coverings - Determination of curling on exposure to moisture (FOREIGN STANDARD)
DIN EN 661:1995
Resilient floor coverings - Determination of the spreading of water (FOREIGN STANDARD)
DIN EN 660-2:1999
Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test (FOREIGN STANDARD)
DIN EN 660-2/A1:2003
Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test; Amendment A1 (FOREIGN STANDARD)
DIN EN 660-1:1999
Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test (FOREIGN STANDARD)
DIN EN 660-1/A1:2003
Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test; Amendment A1 (FOREIGN STANDARD)
DIN EN 655:1997
Floor tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification (FOREIGN STANDARD)
DIN EN 653:1997
Expanded (cushioned) polyvinyl chloride floor coverings - Specification (FOREIGN STANDARD)
DIN EN 652:1997
Polyvinyl chloride floor coverings with cork-based backing - Specification (FOREIGN STANDARD)
DIN EN 650:1997
Polyvinyl chloride floor coverings on jute or polyester felt backing or on polyester felt with polyvinyl chloride backing - Specification (FOREIGN STANDARD)
DIN EN 613:2001
Independent gas-fired convection heaters; English version of DIN EN 613 (FOREIGN STANDARD)
DIN EN 613/A1:2003
Independent gas-fired convection heaters; Amendment A1 (FOREIGN STANDARD)
DIN EN 581-3:2007
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables; German version EN 581-3:2007 (FOREIGN STANDARD)
DIN EN 581-2:2009
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating; German version EN 581-2:2009 (Foreign Standard)
DIN EN 581-1:2006
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements (FOREIGN STANDARD)
DIN EN 569:2007
Mountaineering equipment - Pitons - Safety requirements and test methods; German version EN 569:2007 (FOREIGN STANDARD)
DIN EN 568:2007
Mountaineering equipment - Ice anchors - Safety requirements and test methods; German version EN 568:2007 (FOREIGN STANDARD)
DIN EN 567:1997
Mountaineering equipment - Rope clamps - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 566:2007
Mountaineering equipment - Slings - Safety requirements and test methods; German version EN 566:2006 (FOREIGN STANDARD)
DIN EN 565:2007
Mountaineering equipment - Tape - Safety requirements and test methods; German version EN 565:2006 (FOREIGN STANDARD)
DIN EN 564:2007
Mountaineering equipment - Accessory cord - Safety requirements and test methods; German version EN 564:2006 (FOREIGN STANDARD)
DIN EN 548:2004
Resilient floor coverings - Specification for plain and decorative linoleum (FOREIGN STANDARD)
DIN EN 527-3:2003
Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure (FOREIGN STANDARD)
DIN EN 527-2:2003
Office furniture - Work tables and desks - Part 2: Mechanical safety requirements (FOREIGN STANDARD)
DIN EN 527-1:2000
Office furniture - Work tables and desks - Part 1: Dimensions; English version of DIN EN 527-1 (FOREIGN STANDARD)
DIN EN 509:2000
Decorative fuel-effect gas appliances; English version of DIN EN 509 (FOREIGN STANDARD)
DIN EN 509/A2:2005
Decorative fuel-effect gas appliances (FOREIGN STANDARD)
DIN EN 509/A1:2003
Decorative fuel-effect gas appliances (FOREIGN STANDARD)
DIN EN 50090-5-3:2007
Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio frequency; English version EN 50090-5-3:2006 (FOREIGN STANDARD)
DIN EN 50090-5-1:2005
Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1; German version EN 50090-5-1:2005, text English (FOREIGN STANDARD)
DIN EN 50090-3-3:2009
Home and Building Electronic Systems (HBES) - Part 3-3: Aspects of application - HBES Interworking model and common HBES data types; English version EN 50090-3-3:2009 (Foreign Standard)
DIN EN 50090-3-3:2008
Home and Building Electronic Systems (HBES) - Part 3-3: Aspects of application - HBES Interworking model and common HBES data types; English version FprEN 50090-3-3:2008 (FOREIGN STANDARD)
DIN EN 498:1998
Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use (FOREIGN STANDARD)
DIN EN 497:1998
Specification for dedicated liquefied petroleum gas appliances - Multi-purpose boiling burners for outdoor use (FOREIGN STANDARD)
DIN EN 484:1998
Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use (FOREIGN STANDARD)
DIN EN 449:2008
Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters); German version EN 449:2002+A1:2007 (FOREIGN STANDARD)
DIN EN 436:1994
Resilient floor coverings - Determination of density (FOREIGN STANDARD)
DIN EN 435:1994
Resilient floor coverings - Determination of flexibility (FOREIGN STANDARD)
DIN EN 434:1994
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (FOREIGN STANDARD)
DIN EN 433:1994
Resilient floor coverings - Determination of residual indentation after static loading (FOREIGN STANDARD)
DIN EN 432:1994
Resilient floor coverings - Determination of shear force (FOREIGN STANDARD)
DIN EN 431:1994
Resilient floor coverings - Determination of peel resistance (FOREIGN STANDARD)
DIN EN 430:1994
Resilient floor coverings - Determination of mass per unit area (FOREIGN STANDARD)
DIN EN 429:1993
Resilient floor coverings; determination of the thickness of layers (FOREIGN STANDARD)
DIN EN 428:1993
Resilient floor coverings; determination of overall thickness (FOREIGN STANDARD)
DIN EN 427:1994
Resilient floor coverings - Determination of the side length, squareness and straightness of tiles (FOREIGN STANDARD)
DIN EN 426:1993
Resilient floorcoverings; determination of width, length, flatness and straightness of sheet material (FOREIGN STANDARD)
DIN EN 425:2002
Resilient and laminate floor coverings - Castor chair test (FOREIGN STANDARD)
DIN EN 424:2002
Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg; English version of DIN EN 424 (FOREIGN STANDARD)
DIN EN 423:2002
Resilient floor coverings - Determination of resistance to staining; English version EN 423 (FOREIGN STANDARD)
DIN EN 419-2:2006
Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy; German version EN 419-2:2006 (FOREIGN STANDARD)
DIN EN 419-1:2009
Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety; German version EN 419-1:2009 (Foreign Standard)
DIN EN 416-2:2006
Single-burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy; German version EN 416-2:2006 (FOREIGN STANDARD)
DIN EN 416-1:1999
Single burner gas-fired overhead radiant-tube heaters - Part 1: Safety (FOREIGN STANDARD)
DIN EN 416-1/A3:2002
Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety (FOREIGN STANDARD)
DIN EN 416-1/A2:2002
Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; English version of DIN EN 416-1:1999/A2 (FOREIGN STANDARD)
DIN EN 416-1/A1:2001
Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; English version of DIN EN 416-1:1999/A1:2000 (FOREIGN STANDARD)
DIN EN 30-2-2:1999
Domestic cooking appliances burning gas - Part 2: Rational use of energy - Appliances having forced-convection ovens and/or grills (FOREIGN STANDARD)
DIN EN 30-2-1:2005
Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General (FOREIGN STANDARD)
DIN EN 30-1-3:2007
Domestic cooking appliances burning gas - Part 1-3: Safety - Appliances having a glass ceramic hotplate; German version EN 30-1-3:2003+A1:2006 (FOREIGN STANDARD)
DIN EN 30-1-2:1999
Domestic cooking appliances burning gas - Part 1-2: Safety - Appliances having forced-convection ovens and/or grills (FOREIGN STANDARD)
DIN EN 30-1-1:2005
Domestic cooking appliances burning gas - Part 1-1: Safety - General (FOREIGN STANDARD)
DIN EN 203-2-9:2006
Gas heated catering equipment - Part 2-9 Specific requirements - Solid tops, warming plates and griddles (FOREIGN STANDARD)
DIN EN 203-2-8:2006
Gas heated catering equipment - Part 2-8: Specific requirements - Brat pans and pa%lla cookers (FOREIGN STANDARD)
DIN EN 203-2-7:2007
Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries; German version EN 203-2-7:2007 (FOREIGN STANDARD)
DIN EN 203-2-6:2006
Gas heated catering equipment - Part 2-6: Specific requirements - Hot water heaters for beverage (FOREIGN STANDARD)
DIN EN 203-2-4:2006
Gas heated catering equipment - Part 2-4: Specific requirements - Fryers (FOREIGN STANDARD)
DIN EN 203-2-3:2006
Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans (FOREIGN STANDARD)
DIN EN 203-2-2:2006
Gas heated catering equipment - Part 2-2: Specific requirements - Ovens; German version EN 203-2-2:2006 (FOREIGN STANDARD)
DIN EN 203-2-11:2006
Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers; German version EN 203-2-11:2006 (FOREIGN STANDARD)
DIN EN 203-2-10:2007
Gas heated catering equipment - Part 2-10: Specific requirements - Chargrills; German version EN 203-2-10:2007 (FOREIGN STANDARD)
DIN EN 203-2-1:2006
Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners (FOREIGN STANDARD)
DIN EN 203-1:2005
Gas heated catering equipment - Part 1: General safety rules (FOREIGN STANDARD)
DIN EN 1972:1997
Diving accessories - Snorkels - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1969:2000
Surfaces for sports area - Determination of thickness of synthetic sports surfaces; English version of DIN EN 1969 (FOREIGN STANDARD)
DIN EN 1930:2006
Child care articles - Safety barriers - Safety requirements and test methods (includes Amendment A1:2005) (FOREIGN STANDARD)
DIN EN 1929-7:2005
Basket trolleys - Part 7: Requirements and tests for basket trolleys with baby and child carrying facilities (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1929-4:2005
Basket trolleys - Part 4: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors (FOREIGN STANDARD)
DIN EN 1929-3:2005
Basket trolleys - Part 3: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1929-1:1998
Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without a child-carrying facility (FOREIGN STANDARD)
DIN EN 1888:2005
Child care articles - Wheeled child conveyances - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1818:1998
Resilient floor coverings - Determination of the effect of loaded heavy duty castors (FOREIGN STANDARD)
DIN EN 1817:1998
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings (FOREIGN STANDARD)
DIN EN 1816:1998
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing (FOREIGN STANDARD)
DIN EN 1809:1998
Diving accessories - Buoyancy compensators - Functional and safety requirements, and test methods (FOREIGN STANDARD)
DIN EN 1730:2000
Domestic furniture - Tables - Test methods for determination of strength, durability and stability; English version of DIN EN 1730 (FOREIGN STANDARD)
DIN EN 1729-2:2006
Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods; German version EN 1729-2:2006 (FOREIGN STANDARD)
DIN EN 1729-1:2006
Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions; German version EN 1729-1:2006 (FOREIGN STANDARD)
DIN EN 1728:2004
Domestic furniture - Seating - Test methods for the determination of strength and durability (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1725:1998
Domestic furniture - Beds and mattresses - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1569:2000
Surfaces for sports areas - Determination of the behaviour under a rolling load; English version of DIN EN 1569 (FOREIGN STANDARD)
DIN EN 15638:2009
Ice skates - Safety requirements and test methods; German version EN 15638:2009 (Foreign Standard)
DIN EN 15570:2008
Hardware for furniture - Strength and durability of hinges and their components - Hinges pivoting on a vertical axis; German version EN 15570:2008 (Foreign Standard)
DIN EN 15567-2:2008
Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements; German version EN 15567-2:2007 (FOREIGN STANDARD)
DIN EN 15567-1:2008
Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements; German version EN 15567-1:2007 (FOREIGN STANDARD)
DIN EN 15500:2008
Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment; German version EN 15500:2008 (Foreign Standard)
DIN EN 15468:2008
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods; German version EN 15468:2007 (FOREIGN STANDARD)
DIN EN 15373:2007
Furniture - Strength, durability and safety - Requirements for non-domestic seating; German version EN 15373:2007 (FOREIGN STANDARD)
DIN EN 15372:2008
Furniture - Strength, durability and safety - Requirements for non-domestic tables; German version EN 15372:2008 (FOREIGN STANDARD)
DIN EN 15338:2007
Hardware for furniture - Strength and durability of extension elements and their components; German version EN 15338:2007 (FOREIGN STANDARD)
DIN EN 15330-1:2008
Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf; German version EN 15330-1:2007 (FOREIGN STANDARD)
DIN EN 15312:2007
Free access multi-sports equipment - Requirements, including safety, and test methods; German version EN 15312:2007 (FOREIGN STANDARD)
DIN EN 15306:2007
Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear; German version EN 15306:2007 (FOREIGN STANDARD)
DIN EN 15301-2:2007
Surfaces for sports areas - Part 2: Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory; German version EN 15301-2:2007 (FOREIGN STANDARD)
DIN EN 15301-1:2007
Surfaces for sports areas - Part 1: Determination of rotational resistance; German version EN 15301-1:2007 (FOREIGN STANDARD)
DIN EN 153:2006
Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics (FOREIGN STANDARD)
DIN EN 15288-2:2009
Swimming pools - Part 2: Safety requirements for operation; German version EN 15288-2:2008 (Foreign Standard)
DIN EN 15288-1:2008
Swimming pools - Part 1: Safety requirements for design; German version EN 15288-1:2008 (Foreign Standard)
DIN EN 15250:2007
Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 (FOREIGN STANDARD)
DIN EN 15187:2006
Furniture - Assessment of the effect of light exposure; German version EN 15187:2006 (FOREIGN STANDARD)
DIN EN 1517:2001
Surfaces for sports areas - Determination of resistance of impact; English version of DIN EN 1517 (FOREIGN STANDARD)
DIN EN 1516:2000
Surfaces for sports areas - Determination of resistance to indentation; English version of DIN EN 1516 (FOREIGN STANDARD)
DIN EN 1510:2004
Playing field equipment - Tennis equipment - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 1509:2009
Playing field equipment - Badminton equipment - Functional and safety requirements, test methods; German version EN 1509:2008 (Foreign Standard)
DIN EN 15035:2007
Heating boilers - Special requirements for oil fired room sealed units up to 70 kW; German version EN 15035:2006 (FOREIGN STANDARD)
DIN EN 15034:2007
Heating boilers - Condensing heating boilers for fuel oil; German version EN 15034:2006 (FOREIGN STANDARD)
DIN EN 15033:2007
Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats; German version EN 15033:2006 (FOREIGN STANDARD)
DIN EN 14988-2:2006
Children's high chairs - Part 2: Test methods; German version EN 14988-2:2006 (FOREIGN STANDARD)
DIN EN 14988-1:2006
Children's high chairs - Part 1: Safety requirements; German version EN 14988-1:2006 (FOREIGN STANDARD)
DIN EN 14978:2006
Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods; German version EN 14978:2006 (FOREIGN STANDARD)
DIN EN 14974:2006
Facilities for users of roller sports equipment - Safety requirements and test methods; German version EN 14974:2006 (FOREIGN STANDARD)
DIN EN 14960:2007
Inflatable play equipment - Safety requirements and test methods; German version EN 14960:2006 (FOREIGN STANDARD)
DIN EN 14956:2006
Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas (FOREIGN STANDARD)
DIN EN 14955:2006
Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas (FOREIGN STANDARD)
DIN EN 14954:2006
Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas (FOREIGN STANDARD)
DIN EN 14953:2006
Surfaces for sports areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas (FOREIGN STANDARD)
DIN EN 14952:2006
Surfaces for sports areas - Determination of water absorption of unbound minerals (FOREIGN STANDARD)
DIN EN 14904:2006
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification (FOREIGN STANDARD)
DIN EN 14877:2006
Synthetic surfaces for outdoor sports areas - Specification; German version EN 14877:2006 (FOREIGN STANDARD)
DIN EN 14837:2006
Surfaces for sports areas - Determination of slip resistance; German version EN 14837:2006 (FOREIGN STANDARD)
DIN EN 14836 Berichtigung 1:2007
Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering; German version EN 14836:2005, Corrigenda to zu DIN EN 14836:2006-03; German version EN 14836:2005/AC:2007 (FOREIGN STANDARD)
DIN EN 14836:2006
Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering (FOREIGN STANDARD)
DIN EN 14829:2007
Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007 (FOREIGN STANDARD)
DIN EN 14810:2006
Surfaces for sports areas - Determination of spike resistance; German version EN 14810:2006 (FOREIGN STANDARD)
DIN EN 14809 Berichtigung 1:2008
Surfaces for sports areas - Determination of vertical deformation; German version EN 14809:2005, Corrigenda to DIN EN 14809:2006-03; German version EN 14809:2005/AC:2007 (FOREIGN STANDARD)
DIN EN 14809:2006
Surfaces for sports areas - Determination of vertical deformation (FOREIGN STANDARD)
DIN EN 14808:2006
Surfaces for sports areas - Determination of shock absorption (FOREIGN STANDARD)
DIN EN 14785:2006
Residential space heating appliances fired by wood pellets - Requirements and test methods; German version EN 14785:2006 (FOREIGN STANDARD)
DIN EN 14749:2005
Domestic and kitchen storage units and worktops - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 14703:2007
Furniture - Links for non-domestic seating linked together in a row - Strength requirements and test methods; German version EN 14703:2007 (FOREIGN STANDARD)
DIN EN 14697:2005
Textiles - Terry towels and terry towel fabrics - Specification and methods of test (FOREIGN STANDARD)
DIN EN 1466:2008
Child care articles - Carry cots and stands - Safety requirements and test methods; German version EN 1466:2004+A1:2007 (Foreign Standard)
DIN EN 14619:2005
Roller sports equipment - Kick scooters - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1458-2:1999
Domestic direct gas-fired tumble dryers of types B<(Index)22D> and B<(Index)23D>, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy (FOREIGN STANDARD)
DIN EN 1458-1:1999
Domestic direct gas-fired tumble dryers of types B<(Index)22D> and B<(Index)23D>, of nominal heat input not exceeding 6 kW - Part 1: Safety (FOREIGN STANDARD)
DIN EN 14565:2004
Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification (FOREIGN STANDARD)
DIN EN 14543:2007
Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use; German version EN 14543:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14521:2004
Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer (FOREIGN STANDARD)
DIN EN 14468-2:2005
Table tennis - Part 2: Posts for net assemblies - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14468-1:2005
Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 14438:2007
Gas-fired insets for heating more than one room; German version EN 14438:2006 (FOREIGN STANDARD)
DIN EN 14396:2004
Fixed ladders for manholes (FOREIGN STANDARD)
DIN EN 14372:2004
Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests (FOREIGN STANDARD)
DIN EN 14350-2:2004
Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests (FOREIGN STANDARD)
DIN EN 14350-1:2004
Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests (FOREIGN STANDARD)
DIN EN 14344:2004
Child use and care articles - Child seats for cycles - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 14225-4:2005
Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods (FOREIGN STANDARD)
DIN EN 14225-3:2005
Diving suits - Part 3: Actively heated or cooled suits (systems) - Requirements and test methods (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14225-2:2005
Diving suits - Part 2: Dry suits - Requirements and test methods (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14225-1:2005
Diving suits - Part 1: Wet suits - Requirements and test methods (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14183:2004
Step stools (FOREIGN STANDARD)
DIN EN 14085:2003
Resilient floor coverings - Specification for floor panels for loose laying (FOREIGN STANDARD)
DIN EN 14074:2004
Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts (FOREIGN STANDARD)
DIN EN 14073-3:2004
Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure (FOREIGN STANDARD)
DIN EN 14073-2:2004
Office furniture - Storage furniture - Part 2: Safety requirements (FOREIGN STANDARD)
DIN EN 14059:2003
Decorative oil lamps - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 14036:2003
Child care and use articles - Baby bouncers - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1400-3:2002
Child use and care articles - Soothers for babies and young children - Part 3: Chemical requirements and tests (FOREIGN STANDARD)
DIN EN 1400-2:2002
Child use and care articles - Soothers for babies and young children - Part 2: Mechanical requirements and tests (FOREIGN STANDARD)
DIN EN 1400-1:2002
Child use and care articles - Soothers for babies and young children - Part 1: General safety requirements and product information (FOREIGN STANDARD)
DIN EN 14:1994
Dimensions of bed blankets (FOREIGN STANDARD)
DIN EN 13899:2003
Roller sports equipment - Roller skates - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 13869:2002
Lighters - Child-resistance for lighters - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 13865:2004
Surfaces for sports areas - Determination of angled ball behaviour - Tennis (FOREIGN STANDARD)
DIN EN 13864:2004
Surfaces for sports areas - Determination of tensile strength of synthetic yarns (FOREIGN STANDARD)
DIN EN 13845:2005
Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification (FOREIGN STANDARD)
DIN EN 13842:2004
Oil fired forced convection air heaters - Stationary and transportable for space heating (FOREIGN STANDARD)
DIN EN 13834:2009
Cookware - Ovenware for use in traditional domestic ovens; German version EN 13834:2007+A1:2009 (Foreign Standard)
DIN EN 13817:2005
Surfaces for sports areas - Procedure for accelerated ageing by exposure to hot air (FOREIGN STANDARD)
DIN EN 13761:2002
Office furniture - Visitors' chairs (FOREIGN STANDARD)
DIN EN 13750:2003
Domestic water kettles for use on top of stove, cooker or hob - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 13722:2004
Furniture - Assessment of the surface gloss (FOREIGN STANDARD)
DIN EN 13721:2004
Furniture - Assessment of the surface reflectance (FOREIGN STANDARD)
DIN EN 13672:2004
Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf (FOREIGN STANDARD)
DIN EN 13553:2002
Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification (FOREIGN STANDARD)
DIN EN 13538-3:2002
Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packaging (FOREIGN STANDARD)
DIN EN 13538-2:2002
Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery (FOREIGN STANDARD)
DIN EN 13537:2002
Requirements for sleeping bags (FOREIGN STANDARD)
DIN EN 13453-2:2004
Furniture - Bunk beds and high beds for non-domestic use - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13453-1:2004
Furniture - Bunk beds and high beds for non-domestic use - Part 1: Safety, strength and durability requirements (FOREIGN STANDARD)
DIN EN 13451-8:2001
Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features; English version of DIN EN 13451-8 (FOREIGN STANDARD)
DIN EN 13451-7:2001
Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals; English version of DIN EN 13451-7 (FOREIGN STANDARD)
DIN EN 13451-6:2001
Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards; English version of DIN EN 13451-6 (FOREIGN STANDARD)
DIN EN 13451-5:2001
Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines; English version of DIN EN 13451-5 (FOREIGN STANDARD)
DIN EN 13451-4:2001
Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms; English version of DIN EN 13451-4 (FOREIGN STANDARD)
DIN EN 13451-3:2001
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes; English version of DIN EN 13451-3 (FOREIGN STANDARD)
DIN EN 13451-2:2001
Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends; English version of DIN EN 13451-2 (FOREIGN STANDARD)
DIN EN 13451-11:2004
Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads (FOREIGN STANDARD)
DIN EN 13451-10:2004
Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment (FOREIGN STANDARD)
DIN EN 13451-1:2001
Swimming pool equipment - Part 1: General safety requirements and test methods; English version of DIN EN 13451-1 (FOREIGN STANDARD)
DIN EN 13413:2002
Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification; English version of DIN EN 13413 (FOREIGN STANDARD)
DIN EN 1334:1996
Beds and mattresses - Methods of measurement and recommeded tolerances (FOREIGN STANDARD)
DIN EN 13329:2009
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods; German version EN 13329:2006+A1:2008 (Foreign Standard)
DIN EN 13319:2000
Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods; English version of DIN EN 13319 (FOREIGN STANDARD)
DIN EN 13278:2003
Open fronted gas-fired independend space heaters (FOREIGN STANDARD)
DIN EN 13219:2009
Gymnastic equipment - Trampolines - Functional and safety requirements, test methods; German version EN 13219:2008 (Foreign Standard)
DIN EN 13210:2004
Child use and care articles - Children's harnesses, reins and similar type articles - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 13209-2:2005
Child use and care articles - Baby carriers - Safety requirements and test methods - Part 2: Soft carrier (FOREIGN STANDARD)
DIN EN 13209-1:2004
Child use and care articles - Child carriers - Safety requirements and test methods - Part 1: Framed back carriers (FOREIGN STANDARD)
DIN EN 13200-6:2006
Spectator facilities - Part 6: Demountable (temporary) stands; German version EN 13200-6:2006 (FOREIGN STANDARD)
DIN EN 13200-5:2006
Spectator facilities - Part 5: Telescopic stands; German version EN 13200-5:2006 (FOREIGN STANDARD)
DIN EN 131-4:2007
Ladders - Part 4: Single or multiple hinge-joint ladders; German version EN 131-4:2007 (FOREIGN STANDARD)
DIN EN 131-3:2007
Ladders - Part 3: User Instructions; German version EN 131-3:2007 (FOREIGN STANDARD)
DIN EN 131-2:1993
Ladders; requirements, testing, marking (FOREIGN STANDARD)
DIN EN 13101:2003
Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity (FOREIGN STANDARD)
DIN EN 13089:1999
Mountaineering equipment - Ice-tools - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12868:1999
Child use and care articles - Methods for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers (FOREIGN STANDARD)
DIN EN 12790:2009
Child use and care articles - Reclined cradles; German version EN 12790:2009 (Foreign Standard)
DIN EN 12778:2005
Cookware - Pressure cookers for domestic use (FOREIGN STANDARD)
DIN EN 12752-2:1999
Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 2: Rational use of energy (FOREIGN STANDARD)
DIN EN 12752-1:1999
Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 1: Safety (FOREIGN STANDARD)
DIN EN 1273:2005
Child use and care articles - Baby walking frames - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12727:2001
Furniture - Ranked seating - Test methods and requirements for strength and durability; English version of DIN EN 12727 (FOREIGN STANDARD)
DIN EN 12722:2009
Furniture - Assessment of surface resistance to dry heat; German version EN 12722:2009 (Foreign Standard)
DIN EN 12721:2009
Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009 (Foreign Standard)
DIN EN 12720:2009
Furniture - Assessment of surface resistance to cold liquids; German version EN 12720:2009 (Foreign Standard)
DIN EN 1272:1998
Child care articles - Table mounted chairs - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1271:2006
Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 1270:2008
Playing field equipment - Basketball equipment - Functional and safety requirements, test methods; German version EN 1270:2005 (Foreign Standard)
DIN EN 12669:2000
Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating; English version of DIN EN 12669 (FOREIGN STANDARD)
DIN EN 1266:2003
Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases (FOREIGN STANDARD)
DIN EN 1266/A1:2005
Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases (FOREIGN STANDARD)
DIN EN 12655:1998
Gymnastic equipment - Hanging rings - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 12628:1999
Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, and test methods (FOREIGN STANDARD)
DIN EN 12616:2003
Surfaces for sports areas - Determination of water infiltration rate (FOREIGN STANDARD)
DIN EN 12586:2008
Child use and care articles - Soother holder - Safety requirements and test methods; German version EN 12586:2007 (FOREIGN STANDARD)
DIN EN 12572-3:2009
Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds; German version EN 12572-3:2008 (Foreign Standard)
DIN EN 12572-2:2009
Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls; German version EN 12572-2:2008 (Foreign Standard)
DIN EN 12572-1:2007
Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points; German version EN 12572-1:2007 (FOREIGN STANDARD)
DIN EN 12529:1999
Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements (FOREIGN STANDARD)
DIN EN 12528:1999
Castors and wheels - Castors for furniture - Requirements (FOREIGN STANDARD)
DIN EN 12503-7:2001
Sports mats - Part 7: Determination of static stiffness; English version of DIN EN 12503-7 (FOREIGN STANDARD)
DIN EN 12503-6:2001
Sports mats - Part 6: Determination of the top friction; English version of DIN EN 12503-6 (FOREIGN STANDARD)
DIN EN 12503-5:2001
Sport mats - Part 5: Determination of the base friction; English version of DIN EN 12503-5 (FOREIGN STANDARD)
DIN EN 12503-4:2001
Sport mats - Part 4: Determination of shock absorption; English version of DIN EN 12503-4 (FOREIGN STANDARD)
DIN EN 12503-3:2001
Sports mats - Part 3: Judo mats; Safety requirements; English version of DIN EN 12503-3 (FOREIGN STANDARD)
DIN EN 12491:2001
Paragliders equipment - Emergency parachutes - Safety requirements and test methods; English version of DIN EN 12491 (FOREIGN STANDARD)
DIN EN 12455:1999
Resilient floor coverings - Specification for corkment underlay (FOREIGN STANDARD)
DIN EN 12432:1998
Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods (FOREIGN STANDARD)
DIN EN 12346:1998
Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12278:2007
Mountaineering equipment - Pulleys - Safety requirements and test methods; German version EN 12278:2007 (FOREIGN STANDARD)
DIN EN 12277:2007
Mountaineering equipment - Harnesses - Safety requirements and test methods; German version EN 12277:2007 (FOREIGN STANDARD)
DIN EN 12276:1998
Mountaineering equipment - Frictional anchors - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12275:1998
Mountaineering equipment - Connectors - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12270:1998
Mountaineering equipment - Chocks - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12244-2:1998
Direct gas-fired washing machines of heat input not exceeding 20 kW - Part 2: Rational use of energy (FOREIGN STANDARD)
DIN EN 12244-1:1998
Direct gas-fired washing machines of heat input not exceeding 20 kW - Part 1: Safety (FOREIGN STANDARD)
DIN EN 12235 Berichtigung 1:2006
Surfaces for sports areas - Determination of vertical ball behaviour; German version EN 12235:2004, Corrigenda to DIN EN 12235:2004-09; German version EN 12235:2004/AC:2006 (Foreign Standard)
DIN EN 12235:2004
Surfaces for sports areas - Determination of vertical ball behaviour (FOREIGN STANDARD)
DIN EN 12234:2002
Surfaces for sports areas - Determination of ball roll behaviour (FOREIGN STANDARD)
DIN EN 12233:2003
Surfaces for sports areas - Determination of sward height of natural turf (FOREIGN STANDARD)
DIN EN 12232:2003
Surfaces for sports areas - Determination of thatch depth of natural turf (FOREIGN STANDARD)
DIN EN 12231:2003
Surfaces for sports areas - Method of test - Determination of ground cover of natural turf (FOREIGN STANDARD)
DIN EN 12230:2003
Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces (FOREIGN STANDARD)
DIN EN 12228:2002
Surfaces for sports areas - Determination of joint strength of synthetic surfaces (FOREIGN STANDARD)
DIN EN 12221-2:2008
Changing units for domestic use - Part 2: Test methods; German version EN 12221-2:2008 (Foreign Standard)
DIN EN 12221-1:2008
Changing units for domestic use - Part 1: Safety requirements; German version EN 12221-1:2008 (Foreign Standard)
DIN EN 12199:1998
Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings (FOREIGN STANDARD)
DIN EN 12197:1997
Gymnastic equipment - Horizontal bars - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 12196:2003
Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 12098-4:2005
Controls for heating systems - Part 4: Optimum start-stop control equipment for electrical systems (FOREIGN STANDARD)
DIN EN 1196:1998
Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters (FOREIGN STANDARD)
DIN EN 1177 Berichtigung 1:2008
Impact attenuating playground surfacing - Determination of critical fall height; German version EN 1177:2008, Corrigendum to DIN EN 1177:2008-08 (Foreign Standard)
DIN EN 1177:2008
Impact attenuating playground surfacing - Determination of critical fall height; German version EN 1177:2008 (FOREIGN STANDARD)
DIN EN 1176-7 Berichtigung 1:2008
Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation; German version EN 1176-7:2008, Corrigendum to DIN EN 1176-7:2008-08 (Foreign Standard)
DIN EN 1176-7:2008
Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation; German version EN 1176-7:2008 (Foreign Standard)
DIN EN 1176-6 Berichtigung 1:2008
Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment; German version EN 1176-6:2008, Corrigendum to DIN EN 1176-6:2008-08 (Foreign Standard)
DIN EN 1176-6:2008
Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment; German version EN 1176-6:2008 (Foreign Standard)
DIN EN 1176-5 Berichtigung 1:2008
Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels; German version EN 1176-5:2008, Corrigendum to DIN EN 1176-5:2008-08 (Foreign Standard)
DIN EN 1176-5:2008
Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels; German version EN 1176-5:2008 (FOREIGN STANDARD)
DIN EN 1176-4 Berichtigung 1:2008
Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways, German version EN 1176-4:2008; Corrigendum to DIN EN 1176-4:2008-10 (Foreign Standard)
DIN EN 1176-4:2008
Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways; German version EN 1176-4:2008 (Foreign Standard)
DIN EN 1176-3 Berichtigung 1:2008
Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides; German version EN 1176-3:2008, Corrigendum to DIN EN 1176-3:2008-08 (Foreign Standard)
DIN EN 1176-3:2008
Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides; German version EN 1176-3:2008 (FOREIGN STANDARD)
DIN EN 1176-2 Berichtigung 1:2008
Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings; German version EN 1176-2:2008, Corrigendum to DIN EN 1176-2:2008-08 (Foreign Standard)
DIN EN 1176-2:2008
Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings; German version EN 1176-2:2008 (FOREIGN STANDARD)
DIN EN 1176-11:2008
Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network; German version EN 1176-11:2008 (Foreign Standard)
DIN EN 1176-10:2008
Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment; German version EN 1176-10:2008 (Foreign Standard)
DIN EN 1176-1 Berichtigung 2:2008
Playground equipment and surfacing - Part 1: General safety requirements and test methods; German version EN 1176-1:2008, Corrigendum to DIN EN 1176:2008-08 (Foreign Standard)
DIN EN 1176-1:2008
Playground equipment and surfacing - Part 1: General safety requirements and test methods; German version EN 1176-1:2008 (FOREIGN STANDARD)
DIN EN 1176 Beiblatt 1:2009
Playground equipment and surfacing - Safety requirements and test methods; Supplement 1: Explanations (Foreign Standard)
DIN EN 1130-2:1996
Cribs and cradles for domestic use - Test methods (FOREIGN STANDARD)
DIN EN 1130-1:1996
Cribs and cradles for domestic use - Safety requirements (FOREIGN STANDARD)
DIN EN 1129-2:1995
Foldaway beds - Safety requirements and testing - Test methods (FOREIGN STANDARD)
DIN EN 1129-1:1995
Foldaway beds - Safety requirements and testing - Safety requirements (FOREIGN STANDARD)
DIN EN 1081:1998
Resilient Floor coverings - Determination of the electrical resistance (FOREIGN STANDARD)
DIN EN 1069-1:2000
Water slides of 2 m height and more - Part 1: Safety requirements and test methods; English version of DIN EN 1069-1 (FOREIGN STANDARD)
DIN EN 1023-3:2001
Office furniture - Screens - Part 3: Test methods; English version of DIN EN 1023-3 (FOREIGN STANDARD)
DIN EN 1023-2:2001
Office furniture - Screens - Part 2: Mechanical safety requirements; English version of DIN EN 1023-2 (FOREIGN STANDARD)
DIN EN 1023-1:1996
Office furniture - Screens - Dimensions (FOREIGN STANDARD)
DIN EN 1022:2005
Domestic furniture - Seating - Determination of stability (FOREIGN STANDARD)
DIN EN 1021-1:2006
Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette (FOREIGN STANDARD)
DIN EN 1:2007
Flued oil stoves with vaporizing burners; German version EN 1:1998+A1:2007 (FOREIGN STANDARD)
DIN 68872:1976
Plastic Chair Shells for Indoor Use; Requirements, Testing (FOREIGN STANDARD)
DIN 56950:2005
Entertainment technology - Machinery installations - Safety requirements and inspections (FOREIGN STANDARD)
DIN 4567:1998
Design of special-purpose ladders for professional use (FOREIGN STANDARD)
DIN 4079:1976
Veneers; Thicknesses (FOREIGN STANDARD)
DIN 19555 Berichtigung 1:2006
Step irons for single-line installation - Step irons for setting in concrete, Corrigenda to DIN 19555:2003-04 (FOREIGN STANDARD)
DIN 19555:2003
Step irons for straight manhole steps in in-situ concrete manholes (FOREIGN STANDARD)
DIN 1212-3:2003
Step irons with upstand for staggered manhole steps - Part 3: Bolted-on step irons (FOREIGN STANDARD)
DIN 1212-2:2003
Step irons with upstand for staggered manhole steps - Part 2: Precast concrete manhole step irons (FOREIGN STANDARD)
DIN 1212-1:2003
Step irons with upstand for staggered manhole steps - Part 1: Brickwork and in-situ concrete manhole step irons (FOREIGN STANDARD)
DIN 1211-3:2003
Step irons for staggered manhole steps - Part 3: Bolt-on step irons (FOREIGN STANDARD)
DIN 1211-2:2003
Step irons for staggered manhole steps - Part 2: Precast concrete manhole step irons (FOREIGN STANDARD)
DIN 1211-1:2003
Step irons for staggered manhole steps - Part 1: Brickwork and in-situ concrete manhole step irons (FOREIGN STANDARD)
DIN 11902:1979
Laundry and Dry-cleaning Machines; Testing of Output, Effect of Treatment and Consumption of Working Materials; Test Conditions and Methods (FOREIGN STANDARD)

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm