Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm

API BULL 5C2
 Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe- Twenty-First Edition
 
API BULL 5C3
 Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe, and Line Pipe Properties-Sixth Edition; Supplment 1 - April 1999
 
API BULL 6J
 Bulletin on Testing of Oilfield Elastomers - A Tutorial
 
API BULL D10
 Selecting Rotary Drilling Equipment, Procedure for
 
API PUBL 3802
 Audit Control Cuide
 
API PUBL 3810
 CODE - Crude Oil Data Exchange Implementation Guidelines
 
API PUBL 3820
 Grade; Gas Revenue Accounting Data Exchange; Grade User Manual
 
API PUBL 3855
 Conventions and Implementation Guidelines for EDI Wellsite Information Transfer Specification (WITS)-Version 1.1
 
API PUBL 3860
 Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange
 
API RP 13B- 1
 Recommended Practice Standard Procedure for Field Testing Water- Based Drilling Fluids-Third Edition; ANSI/API 13B-1/ISO 10414-1
 
API RP 13B- 2
 Recommended Practice for Field Testing Oil-Based Drilling Fluids-Fourth Edition
 
API RP 13D
 Recommended Practice on the Rheology and Hydraulics of Oil-Well Drilling Fluids-Fourth Edition
 
API RP 13E
 Recommended Practice for Shale Shaker Screen Cloth Designation- Replaced by API RP 13C
 
API RP 13K
 Recommended Practice for Chemical Analysis of Barite-Second Edition; Errata 4/25/1998
 
API RP 16E
 Recommended Practice for Design of Control Systems for Drilling Well Control Equipment
 
API RP 16Q
 Recommended Practice for Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems-First Edition; Formerly RP 2Q and RP 2K
 
API RP 53
 Blowout Prevention Equipment Systems for Drilling Wells-Third Edition
 
API RP 54
 Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations-Third Edition
 
API RP 5A3
 Recommended Practice on Thread Compounds for Casing, Tubing, and Line Pipe-Second Edition/ISO 13678 Adoption
 
API RP 5C1
 Recommended Practice for Care and Use of Casing and Tubing- Eighteenth Edition
 
API RP 5L1
 Recommended Practice for Railroad Transportation of Line Pipe-Sixth Edition
 
API RP 5LW
 Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels-Second Edition
 
API RP 64
 Recommended Practices for Diverter Systems Equipment and Operations-Second Edition
 
API RP 7G
 Recommended Practice for Drill Stem Design and Operating Limits- Sixteenth Edition; Errata May 2000; Addendum 1: November 2003
 
API RP 8B
 Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment-Seventh Edition/ ISO 13534 Adoption; Addendum: 11/2003; Addendum 2: 4/2005
 
API RP 9B
 Recommended Practice on Application Care, and Use of Wire Rope for Oil Field Service-Twelfth Edition
 
API SPEC 13A
 Specification for Drilling-Fluid Materials-16th Edition
 
API SPEC 14D
 Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service
 
API SPEC 16A
 Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption; Errata: 11/2004
 
API SPEC 16C
 Specification for Choke and Kill Systems
 
API SPEC 16D
 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment-Second Edition
 
API SPEC 5CT
 Specification for Casing and Tubing-Eighth Edition; ISO 11960:2004 Adoption; Effective Date: January 1, 2006
 
API SPEC 5CT (METRIC)
 Specification for Casing and Tubing (Metric Units)-Fifth Edition; Superseded by Spec 5CT-2001
 
API SPEC 5D
 Specification for Drill Pipe-Fifth Edition
 
API SPEC 5L
 Specification for Line Pipe-Forty-Third Edition; Errata: 12/20/2004
 
API SPEC 6A
 Specification for Wellhead and Christmas Tree Equipment-Nineteenth Edition; ISO 10423 Adoption; Errata 1: 9/01/2004; Errata 2: 04/25/2005
 
API SPEC 8A
 Specification for Drilling and Production Hoisting Equipment-Thirteenth Edition; Addendum 1 May 2001
 
API SPEC 8C
 Specification for Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Fourth Edition; ISO 13535:2000/ ISO 13535 Adoption; Addendum 1: 11/1/2004; Addendum 2: 04/15/2005;
 
API SPEC 9A
 Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption
 
API STD 2220
 Contractor Safety Performance Process-Second Edition
 
API TR 6AF
 Technical Report on Capabilities of API Flanges under Combinations of Load-Second Edition
 
API TR 6AF1
 Technical Report on Temperature Derating on API Flanges under Combination of Loading-Second Edition
 
API TR 6AF2
 Technical Report on Capabilities of API Integral Flanges under Combination of Loading - Phase II-Second Edition
 
API TR 6F1
 Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API Specification 6FA-Third Edition
 
API WORLDWIDE CEMENTING
 Worldwide Cementing Practices First Edition
 
API CUMULATIVE IMPACT
 Cumulative Impact of Environmental Regulations on the U.S. Petroleum Refining, Transportation and Marketing Industries
 
API DR 145
 Identification of Oils that Produce Non-Buoyant in Situ Burning Residues and Methods for Their Recovery
 
API DR 148
 Identification of Organic Toxicants in Treated Refinery Effluents
 
API DR 225
 Remediation of a Fractured Clay Till Using Air Flushing: Field Experiments at Sarnia, Ontario
 
API DR 342
 Toxicity Bioassays on Dispersed Oil in the North Sea: June 1996 Field Trials
 
API DR 351
 Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity
 
API DR 53
 Characterization of Exploration and Production Associated Waste
 
API FORM 5U01
 Model Form of Voluntary Unit Agreement-Fourth Edition
 
API FORM 5U02
 Model Form of Voluntary Unit Operating Agreement-Fourth Edition
 
API FORM 5U04
 Model Form of Statutory Unit Operating Agreement-Second Edition
 
API INTERPRETATIONS 1988
 1988 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1989
 1989 and 1990 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1991
 1991 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1992
 1992 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1993
 1993 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1995
 1994 and 1995 Interpretations - Technical Publications Answers to Technical Inquiries
 
API MF 5U03
 Model Form of Statutory Unit Agreement-Second Edition
 
API PUB 352
 Management of Residual Materials: 1997 Petroleum Refining Performance
 
API PUBL 2021A
 Interim Study - Prevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks-First Edition
 
API PUBL 2207
 Preparing Tank Bottoms for Hot Work-Fifth Edition; Errata June 1999
 
API PUBL 2218
 Fireproofing Practices in Petroleum and Petrochemical Processing Plants-Second Edition
 
API PUBL 2230
 Static Electricity Research Project
 
API PUBL 2351
 Inproving Human Performance Systems in the Petroleum Industry; Phase I Report: Data Collection and Feasibility Assessment
 
API PUBL 2524
 Impact Assessment of New Data on the Validity of American Petroleum Institute Marine Transfer Operation Emission Factors
 
API PUBL 300
 Generation and Management of Wastes and Secondary Materials in the Petroleum Refining Industry: 1987-1988
 
API PUBL 301
 Aboveground Storage Tank Survey
 
API PUBL 302
 Waste Minimization in the Petroleum Industry Source Reduction Recycle Treatment Disposal a Compendium of Practices
 
API PUBL 303
 Generation and Management of Wastes and Secondary Materials
 
API PUBL 304
 Evaluation of Restoration Alternatives for Natural Resources Injured by Oil Spills
 
API PUBL 305
 Protecting Agricultural Crops from Ozone Exposures Key Issues and Future Research Directions
 
API PUBL 306
 An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
 
API PUBL 307
 Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
 
API PUBL 309
 Current Status and Research Needs Related to Biogenic Hydrocarbons
 
API PUBL 310
 Analysis of Refinery Screening Data
 
API PUBL 311
 Environmental Design Considerations for Petroleum Refining Crude Processing Units
 
API PUBL 31101
 Environmental Design Considerations for Petroleum Refining Crude Processing Units
 
API PUBL 312
 Responding to Environmental Challenge A Discussion Among People from Industry, Government and Environmental Groups
 
API PUBL 315
 Assessment of Tankfield Dike Lining Materials and Methods
 
API PUBL 316
 Identifying and Measuring Nonuse Values for Natural and Environmental Resources a Critical Review of the State of the Art
 
API PUBL 317
 Industry Experience with Pollution Prevention Programs
 
API PUBL 322
 Engineering Evaluation of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
 
API PUBL 323
 Engineering Evaluation of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
 
API PUBL 324
 Generation and Management of Residual Materials Petroleum Refining Performance 1990 Survey
 
API PUBL 325
 Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks
 
API PUBL 326
 Cost Effectiveness of VOC and NOx Emission Control Measures
 
API PUBL 327
 Aboveground Storage Tank Standards: A Tutorial
 
API PUBL 328
 Laboratory Evaluation of Candidate Liners for Secondary Containment of Petroleum Products
 
API PUBL 329
 Generation and Management of Residual Materials Petroleum Refining Performance 1991 Survey
 
API PUBL 330
 Survey of API Members Aboveground Storage Tank Facilities; Health and Environmental Affairs
 
API PUBL 331
 Environmental Performance Indicators: Methods for Measuring Pollution Prevention
 
API PUBL 332
 Comparison of Screening Values from Selected Hydrocarbon Screening Instruments
 
API PUBL 333
 Generation and Management of Residual Materials
 
API PUBL 334
 Guide to Leak Detection for Aboveground Storage Tanks
 
API PUBL 336
 Management of Residual Materials: 1994 Petroleum Refining Performance
 
API PUBL 337
 Development of Emission Factors for Leaks in Refinery Components in Heavy Liquid Service
 
API PUBL 339
 Management of Residual Materials: 1995 Petroleum Refining Performance
 
API PUBL 340
 Liquid Release Prevention and Detection Measures for Aboveground Storage Facilities
 
API PUBL 341
 Survey of Diked-Area Liner Use at Aboveground Storage Tank Facilities
 
API PUBL 342
 Fugitive Emissions from Equipment Leaks 1: Monitoring Manual
 
API PUBL 343
 Fugitive Emissions from Equipment Leaks II: Calculation Procedures for Petroleum Industry Facilities
 
API PUBL 345
 Management of Residual Materials: 1996 - Petroleum Refining Performance
 
API PUBL 346
 Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines
 
API PUBL 347
 Hazardous Air Pollutant Emissions from Gasoline Loading Operations at Bulk Gasoline Terminals
 
API PUBL 348
 Air Toxics Emission Factors for Combustion Sources Using Petroleum- Based Fuels - Volume 1 Development of Emission Factors Using API/WSPA Approach
 
API PUBL 349
 Air Toxics Emission Factors for Combustion Sources Using Petroleum- Based Fuels - Graphical-User-Interface Database and User?′s Manual Version 2.0.1
 
API PUBL 351
 Overview of Soil Permeability Test Methods
 
API PUBL 4452
 1987 Oil Spill Conference
 
API PUBL 4465
 Evaluation of Treatment Technologies for Listed Petroleum Refinery Wastes
 
API PUBL 4479
 Proceedings 1989 Oil Spill Conference Prevention, Behavior, Control, Cleanup
 
API PUBL 4525
 Compilation of Field- Collected Cost and Treatment Effectiveness Data for the Removal of Dissolved Gasoline Components from Groundwater
 
API PUBL 4527
 Evaluation of Limiting Constituents Suggested for Land Disposal of Exploration and Production Wastes
 
API PUBL 4529
 Oil Spill Conference Prevention, Behavior, Control, Cleanup
 
API PUBL 4531
 Chemical Fate and Impact of Oxygenates in Groundwater: Solubility of BTEX from Gasoline-Oxygenate Mixtures
 
API PUBL 4546
 Hazard Response Modeling Uncertainty (A Quantitative Method) Volume II Evaluation of Commonly Used Hazardous Gas Dispersion Models
 
API PUBL 4558
 Options for Minimizing Environmental Impacts of Freshwater Spill Response
 
API PUBL 45592
 Results of Toxicological Studies
 
API PUBL 4580
 1993 Oil Spill Conference
 
API PUBL 4587
 Remote Sensing Feasibility Study of Refinery Fenceline Emissions
 
API PUBL 4588
 Development of Fugitive Emission Factors and Emission Profiles for Petroleum Marketing Terminals Volume I: Text
 
API PUBL 4589
 Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations
 
API PUBL 4592
 Odor Threshold Studies Performed with Gasoline and Gasoline Combined with MTBE, ETBE and TAME
 
API PUBL 4593
 Transport and Fate of Non-BTEX Petroleum Chemicals in Soils and Groundwater
 
API PUBL 4594
 Critical Review of Toxicity Values and an Evaluation of the Persistence of Petroleum Products for Use in Natural Resource Damage Assessments
 
API PUBL 4599
 Interlaboratory Study of Three Methods for Analyzing Petroleum Hydrocarbons in Soils
 
API PUBL 4600
 Metals Criteria for Land Management of Exploration and Production Wastes: Technical Support Document for API Recommended Guidance Values
 
API PUBL 4601
 Transport and Fate of Dissolved Methanol, Methyl-Tertiary-Butyl- Ether, and Monoaromatic Hydrocarbons in a Shallow Sand Aquifer Appendix H: Laboratory Biotransformation Studies
 
API PUBL 4602
 Minimization, Handling, Treatment, and Disposal of Petroleum Products Terminal Wastewaters; Errata - 1994
 
API PUBL 4603
 Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects
 
API PUBL 4604
 Investigation of MOBILE5a Emission Factors: Evaluation of I/M and LEV Program Benefits
 
API PUBL 4605
 Investigation of MOBILE5a Emission Factors: Evaluation of IM240-to- FTP Correlation and Base Emission Rate Equations
 
API PUBL 4606
 Source Control and Treatment of Contaminants Found in Petroleum Product Terminal Tank Bottoms
 
API PUBL 4607
 User?′s Guide and Technical Resource Document: Evaluation of Sediment Toxicity Tests for Biomonitoring Programs
 
API PUBL 4608
 Evaluation of Sediment Toxicity Tests for Biomonitoring Programs
 
API PUBL 4609
 In Situ Air Sparging: Evaluation of Petroleum Industry Sites and Considerations for Applicability, Design and Operation
 
API PUBL 4610
 Critical Review of Draft EPA Guidance on Assessment and Control of Bioconcentratable Contaminants in Surface Waters
 
API PUBL 4611
 Interlaboratory Study of EPA Methods 1662, 1654A, and 1663 for the Determination of Diesel, Mineral and Crude Oils in Drilling Muds from Offshore Oil and Gas Industry Discharges
 
API PUBL 4612
 Study of Refinery Fugitive Emissions from Equipment Leaks
 
API PUBL 4613
 Study of Refinery Fugitive Emissions from Equipment Leaks Appendices
 
API PUBL 4615
 Emission Factors for Oil and Gas Production Operations
 
API PUBL 4616
 Importance of Using Alternative Base Cases in Photochemical Modeling
 
API PUBL 4617
 Monte Carlo Approach to Generating Equivalent Ventilation Rates in Population Exposure Assessments
 
API PUBL 4618
 Characteristics and Performance of Supercritical Fluid Extraction (SFE) in the Analysis of Petroleum Hydrocarbons in Soils and Sludges
 
API PUBL 4619
 Study to Characterize Air Concentrations of Methyl Tertiary Butyl Ether (MTBE) at Service Stations in the Northeast
 
API PUBL 4620
 International Oil Spill Conference Proceedings Achieving and Maintaining Preparedness
 
API PUBL 4621
 A: IMPLEMENTING AN EFFECTIVE RESPONSE MANAGEMENT SYSTEM - B: THE USE AND MISUSE OF SCIENCE IN NATURAL RESOURCE DAMAGE ASSESSMENT - C: PERSPECTIVES ON ESTABLISHING AND MAINTAINING OIL POLLUTION RESPONSE CAPABILITIES-INCLUDES API 4621A, B & C
 
API PUBL 4622
 Petroleum Industry Data Characterizing Occupational Exposures to Methyl Tertiary Butyl Ether (MTBE) 1983-1993
 
API PUBL 4623
 Anecdotal Health-Related Complaint Data Pertaining to Possible Exposures to Methyl Tertiary Butyl Ether (MTBE): 1993 and 1994 Follow-Up Surveys (1984- 1994)
 
API PUBL 4625
 Service Station Personnel Exposures to Oxygenated Fuel Components - 1994
 
API PUBL 4627
 In Situ and On-Site Biodegradation of Refined and Fuel Oils: A Review of Technical Literature 1988 - 1991
 
API PUBL 4628
 Guidance Manual for Modeling Hypothetical Accidental Releases to the Atmosphere
 
API PUBL 4631
 Petroleum Contaminated Low Permeability Soil: Hydrocarbon Distribution Processes, Exposure Pathways and In Situ Remediation Technologies
 
API PUBL 4632
 Reducing Uncertainty in Laboratory Sediment Toxicity Tests
 
API PUBL 4633
 Barium in Produced Water: Fate and Effects in the Marine Environment
 
API PUBL 4634
 Index and Abstracts of API Health-Related Research 13th Edition 1959-1994
 
API PUBL 4635
 Compilation of Field Analytical Methods for Assessing Petroleum Product Releases
 
API PUBL 4636
 HGSYSTEM 3.0: Technical Reference Manual and User?′s Guide
 
API PUBL 4637
 Analysis of Causes of Failure in High Emitting Cars
 
API PUBL 4638
 Calculation Workbook for Oil and Gas Production Equipment Fugitive Emissions
 
API PUBL 4639
 Estimation of Fugitive Emissions from Petroleum Refinery Process Drains Phase I Report
 
API PUBL 4640
 Petroleum in the Freshwater Environment an Annotated Bibliography 1946 - 1993
 
API PUBL 4641
 Summary of Produced Water Toxicity Identification Evaluation Research
 
API PUBL 4642
 A Study to Quantify On-Road Emissions of Dioxins and Furans from Mobile Sources: Phase 2
 
API PUBL 4643
 Estimation of Infiltration and Recharge for Environmental Site Assessment
 
API PUBL 4644
 Methodology for Estimating Incremental Benzene Exposures and Risks Associated with Glycol Dehydrators
 
API PUBL 4645
 Methane and Carbon Dioxide Emission Estimates from U.S. Petroleum Sources
 
API PUBL 4646
 Evaluation of Fuel Tank Flammability of Low RVP Gasolines
 
API PUBL 4647
 Brain Glial Fibrillary Acidic Protein (GFAP) as a Marker of Neurotoxicity During Inhalation Exposure to Toluene
 
API PUBL 4648
 Human Neurobehavioral Study Methods: Effects of Subject Variables on Research Results
 
API PUBL 4650
 Analysis of High-Mileage-Vehicle Emissions Data from Late-Model, Fuel-Injected Vehicles
 
API PUBL 4651
 International Oil Spill Conference Improving Environmental Protection - Progress, Challenges, Responsibilities-Proceedings
 
API PUBL 4653
 Fugitive Emission Factors for Crude Oil and Product Pipeline Facilities
 
API PUBL 4654
 Field Studies of BTEX and MTBE Intrinsic Bioremediation
 
API PUBL 4655
 Field Evaluation of Biological and Non-Biological Treatment Technologies to Remove MTBE/Oxygenates from Petroleum Product Terminal Wastewaters
 
API PUBL 4656
 Bioaccumulation: How Chemicals Move from the Water into Fish and Other Aquatic Organisms
 
API PUBL 4657
 Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies
 
API PUBL 4658
 Methods for Measuring Indicators of Intrinsic Bioremediation: Guidance Manual
 
API PUBL 4659
 Graphical Approach for Determining Site-Specific Dilution-Attenuation Factors (DAFs)-Technical Background Document and User?′s Guide; Cover Page and A-20 - 1998
 
API PUBL 4661
 Exploration and Production Emission Calculator (EPEC)-Disk Available
 
API PUBL 4662
 Evaluation of a Petroleum Production Tank Emissions Model- Appendices A, B, C, & D- October 1997
 
API PUBL 4663
 Remediation of Salt-Affected Soils at Oil and Gas Production Facilities-Errata 10/15/98
 
API PUBL 4664
 Mixing Zone Modeling and Dilution Analysis for Water-Quality-Based NPDES Permit Limits
 
API PUBL 4665
 Analysis and Reduction of Toxicity in Biologically Treated Petroleum Product Terminal Tank Bottoms Water
 
API PUBL 4666
 Toxicity of Common Ions to Freshwater and Marine Organisms
 
API PUBL 4667
 Vehicle Emissions Testing of Rapidly Aged Catalysts
 
API PUBL 4668
 Delineation and Characterization of the Borden MTBE Plume: An Evaluation of Eight Years of Natural Attenuation Processes
 
API PUBL 4670
 Selecting Field Analytical Methods a Decision-Tree Approach
 
API PUBL 4671
 Technical Bulletin on Oxygen Releasing Materials for In Situ Groundwater Remediation
 
API PUBL 4672
 The Use of Treatment Wetlands for Petroleum Industry Effluents
 
API PUBL 4673
 Impacts of Petroleum Product Marketing Terminals on the Aquatic Environment
 
API PUBL 4674
 Assessing the Significance of Subsurface Contaminant Vapor Migration to Enclosed Spaces Site-Specific Alternatives to Generic Estimates
 
API PUBL 4675
 Fate and Environmental Effects of Oil Spills in Freshwater Environments
 
API PUBL 4676
 Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment Options
 
API PUBL 4677
 Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains
 
API PUBL 4678
 Fugitive Emissions from Refinery Process Drains Volume II; Fundamentals of Fugitive Emissions from Refinery Process Drains
 
API PUBL 4679
 Amine Unit Emissions Model AMINECalc Version 1.0-Errata June 16, 1999; Disk Available
 
API PUBL 4680
 Amine Unit Air Emissions Model Evaluation
 
API PUBL 4681
 Fugitive Emissions from Refinery Process Drains Volume III, Process Drain Emission Calculator: APIDRAIN Version 1.0-Disk Available
 
API PUBL 4682
 Free-Product Recovery of Petrolem Hydrocarbon Liquids
 
API PUBL 4683
 Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities
 
API PUBL 4684
 Compilation and Review of Data on the Environmental Effects of In Situ Burning of Inland and Upland Oil Spills
 
API PUBL 4686
 1999 Oil Spill Conference Proceedings
 
API PUBL 4687
 1999 Internatiional Oil Spill Conference Issue Papers: Myths and Realities of Oil Spill Planning and Response: The Challenges of a Large Spill; Judgeing Oil Spill Response Performance: The Challenge of Competing Perspectives-TR IOSC-007 and TR IOSC-008
 
API PUBL 4688
 Temporary Treatment Options for Petroleum Distribution Terminal Wastewaters
 
API PUBL 4690
 Guide for the Use of Semipermeable Membrane Devices (SPMDs) as Samplers of Waterborne Hyhrophobic Organic Contaminats
 
API PUBL 4691
 Fate of Spilled Oil in Marine Waters: Where Does It Go? What Does It Do? How Do Dispersants Affect It?
 
API PUBL 4692
 A Decision-Maker?′s Guide to Dispersants: A Review of the Theory and Operational Requirements
 
API PUBL 4693
 Effects of Oil and Chemically Dispersed Oil in the Environment
 
API PUBL 4694
 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
 
API PUBL 4695
 Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits
 
API PUBL 4700
 Primer for Evaluating Ecological Risk at Petroleum Release Sites
 
API PUBL 4701
 Bioaccumulation: An Evaluation of Federal and State Regulatory Initiatives
 
API PUBL 4702
 Technologies to Reduce Oil and Grease Content of Well Treatment, Well Completion, and Workover Fluids for Overboard Disposal
 
API PUBL 4703
 Gas Fired Boiler - Test Report Refinery Site A Characterization of Fine Particulate Emission Factor and Specification Profiles from Stationary Petroleum Industry Combustion Sources
 
API PUBL 4704
 Gas Fired Heater - Test Report Site B Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources
 
API PUBL 4706
 Environmental Considerations for Marine Oil Spill Response
 
API PUBL 4709
 Risk-Based Methodologies for Evaluating Petroleum Hydrocarbon Impacts at Oil and Natural Gas E&P Sites
 
API PUBL 4711
 Methods for Determining Inputs to Environmental Petroleum Hydrocarbon Mobility and Recovery Models
 
API PUBL 4712
 Gas-Fired Steam Generator - Test Reprot Site C: Characterization of Fine Particulate Emission Factors and Speciation Profiles from Stationary Petroleum Industry Combustion Sources
 
API PUBL 4713
 Test Report: Fluidized Catalytic Cracking Unit at a Refinery (Site A); Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources
 
API PUBL 4714
 A Guide to Polycyclic Aromatic Hydrocarbons for the Non- Specialists
 
API PUBL 4720
 Comparison of API and EPA Toxic Air Pollutant Emission Factors for Combustion Sources-First Edition
 
API PUBL 4721
 Analytical Detection and Qualification Limits: Survey of State and Federal Approaches
 
API PUBL 4730
 Groundwater Remediation Strategies Tool
 
API PUBL 4733
 Risk-Based Screening Levels for the Protection of Livestock Exposed to Petroleum Hydrocarbons
 
API PUBL 4734
 Modeling Study of Produced Water Release Scenarios
 
API PUBL 4741
 Collecting and Interpreting Soil Gas Samples from the Vadose Zone A Practical Strategy for Assessing the Subsurface Vapor-to-Indoor Air Migration Pathway at Petroleum Hydrocarbon Sites
 
API PUBL 4743
 Hazard Narrative for Tertiary-Butyl Alcohol (TBA) CAS Number 75 65 0
 
API PUBL 760
 Model Risk Management Plan Guidance for Petroleum Refineries Guidance in Complying with EPA?′s RMP Rule (40 Code of Federal Regulations, Part 68)- Third Edition
 
API PUBL 761
 Model Risk Management Plan Guidance for Exploration and Production (E&P) Facilities-Third Edition
 
API PUBL 9100A
 Model Environment, Health & Saftey (EHS) Management System A Voluntary Tool for Companies Interested in Developing an EHS Management System or Enhancing an Existing System
 
API PUBL 9100B
 Guidance Document for Model EHS Management System A Manual to Assist Companies Interested in Developing an EHS Management System or Enhancing an Existing System
 
API REPORT PUBL 344
 Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles
 
API RP 2003
 Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents-Sixth Edition
 
API RP 2005
 Service Station Safety-Sixth Edition; Supplement - 1996
 
API RP 2016
 Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks-First Edition
 
API RP 9000
 Management Practices, Self-Assessment Process, and Resource Materials-Second Edition
 
API SECURITY
 Security Vulnerability Assessment Methodology for the Petroleum and Petrochemical Industries-Second Edition
 
API SECURITY GUIDELINES
 Security Guidelines for the Petroleum Industry-Third Edition
 
API SMART LEAK
 Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions
 
API STD 1512
 Petroleum Test Laboratory Accreditation Program-First Edition
 
API TR 400
 Preliminary Study of the Effect of Toluene on Pregnancy of the Rat (Inhalation Exposure)
 
API TR 401
 Toluene the Effect on Pregnancy of the Rat (Inhalation Exposure)
 
API TR 402
 Tertiary-Amyl Methyl Ether (TAME) Toxicity to the Freshwater Alga Selenastrum Capricornutum
 
API TR 403
 Closed-Patch Repeated Insult Dermal Sensitization Study of Tertiary Amyl Methyl Ether (TAME) in Guinea Pigs (Buehler Method)
 
API TR 404
 Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part I - Rats Final Abridged Report
 
API TR 405
 Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part II - Mice Final Abridged Report
 
API TR 406
 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Daphnids (Daphnia Magna) Under Flow- Through Conditions TSCA Guideline Section Mark 797.1300
 
API TR 407
 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Mysid Shrimp (Mysidopsis Bahia) Under Static Renewal Conditions TSCA Guideline Section Mark 797.1930
 
API TR 408
 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Rainbow Trout (Oncorhynchus Mykiss) Under Flow-Through Conditions TSCA Guideline Section Mark 797.1400
 
API TR 409
 Primary Skin Irritation Study In Rabbits of: API 91-01 and PS-6 Unleaded Test Gasolines (CAIS Abstract No. 42-2014)
 
API TR 410
 Chromosome Aberrations in Chinese Hamster Ovary (CHO) Cells Exposed to Tertiary Amyl Methyl Ether (TAME)
 
API TR 411
 Chinese Hamster Ovary (CHO)/HGPRT Mutation Assay of Tertiary Amyl Methyl Ether (TAME)
 
API TR 412
 A Range-Finding Developmental Inhalation Toxicity Study of Unleaded Gasoline Vapor Condensate in Rats and Mice Via Whole-Body Exposers
 
API TR 414
 An Inhalation Developmental Toxicity Study of Unleaded Gasoline Vapor Condensate in the Rat Via Whole-Body Exposure

1   2  
API SPEC 6A
 Specification for Wellhead and Christmas Tree Equipment-Nineteenth Edition; ISO 10423 Adoption; Errata 1: 9/01/2004; Errata 2: 04/25/2005; Errata 3: 06/2006
 
API SPEC 5L
 Specification for Line Pipe-Forty-Third Edition; Errata: 12/20/2004
 
DOD SPEC 5L
 Specification for Line Pipe-Forty-Third Edition; Errata: 12/20/2004
 
API STD 1104
 Welding of Pipelines and Related Facilities-Twentieth Edition
 
DOD STD 1104
 Welding of Pipelines and Related Facilities-Twentieth Edition
 
API SPEC 6D
 ISO 14313:1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves-Twenty-Second Edition/ISO 14313 Adoption; Errata: 3/01/2005
 
DOD SPEC 6D
 ISO 14313:1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves-Twenty-Second Edition/ISO 14313 Adoption; Errata: 3/01/2005
 
API RP 500
 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2-First Edition; Errata 10/17/1998
 
API RP 14C
 Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms-Seventh Edition
 
ANSI RP 14E
 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
 
API RP 14E
 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
 
API SPEC 17D
 Specification for Subsea Wellhead and Christmas Tree Equipment-First Edition; Supplement 1: March 1993; Supplement 2: August 1996
 
API RP 2A-WSD
 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design-Twenty-First Edition; Errata and Supplement 2: 10/2005
 
API SPEC 5CT
 Specification for Casing and Tubing-Eighth Edition; ISO 11960:2004 Adoption; Effective Date: January 1, 2006; Errata: 3/31/2006; Errata 2: April 7, 2006
 
ANSI RP 505
 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2-First Edition; Errata 8/17/98
 
API RP 505
 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2-First Edition; Errata 8/17/98
 
API RP 2A-LRFD
 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design-First Edition; Errata - October 1993; Supplement 1 - February 1997
 
API SPEC 12F
 Specification for Shop Welded Tanks for Storage of Production Liquids
 
API RP 14J
 Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities-Second Edition
 
ANSI SPEC 12J
 Specification for Oil and Gas Separators
 
API SPEC 12J
 Specification for Oil and Gas Separators
 
ANSI SPEC 16A
 Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption; Errata: 11/2004
 
API SPEC 16A
 Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption; Errata: 11/2004
 
API RP 2D
 Operation and Maintenance of Offshore Cranes-Sixth Edition; Includes Errata: 05/2007
 
API RP 7G
 Recommended Practice for Drill Stem Design and Operating Limits-Sixteenth Edition; Errata May 2000; Addendum 1: November 2003
 
API SPEC 2C
 Specification for Offshore Pedestal Mounted Cranes-Sixth Edition
 
API SPEC 5B
 Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (U.S. Customary Units)-Fourteenth Edition; Errata 4/9/1998; Addendum 1 3/2004
 
DOD SPEC 5B
 Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (U.S. Customary Units)-Fourteenth Edition; Errata 4/9/1998; Addendum 1 3/2004
 
API SPEC 6FA
 Specification for Fire Test for Valves-Third Edition; Errata 12/18/2006
 
ANSI RP 14F
 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations-Fourth Edition
 
API RP 14F
 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations-Fourth Edition
 
API BULL 5C3
 Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe, and Line Pipe Properties-Sixth Edition; Supplment 1 - April 1999
 
API RP 14G
 Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms-Fourth Edition
 
API RP 5L1
 Recommended Practice for Railroad Transportation of Line Pipe-Sixth Edition
 
API RP 17B
 Recommended Practice for Flexible Pipe-Third Edition
 
API RP 17A
 Design and Operation of Subsea Production Systems - General Requirements and Recommendations-Fourth Edition; ISO 13628-1:2005; ISO 13628-1 Adoption
 
API SPEC 16D
 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment-Second Edition
 
API BULL 5C2
 Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe-Twenty-First Edition
 
API SPEC 7
 Specification for Rotary Drill Stem Elements-Fortieth Edition; Addendum 1: 8/2004; Addendum 2: 03/2006;:2006
 
API 6AM
 Technical Report on Material Toughness-Second Edition; Formerly Bulletin 6AM
 
API RP 14B
 Petroleum and natural gas industriesSubsurface safety valve systemsDesign, installation, operation and redress-Fifth Edition; ISO 10417
 
API SPEC 16C
 Specification for Choke and Kill Systems
 
API RP 12R1
 Recommended Practice for Setting, Maintenance, Inspection, Operation and Repair of Tanks in Production Service-Fifth Edition; Effective Date: 10/01/1997
 
API RP 53
 Blowout Prevention Equipment Systems for Drilling Wells-Third Edition
 
API SPEC 12D
 Specification for Field Welded Tanks for Storage of Production Liquids
 
DOD SPEC 12D
 Specification for Field Welded Tanks for Storage of Production Liquids
 
API SPEC 2H
 Specification for Carbon Manganese Steel Plate for Offshore Structures-Ninth Edition
 
ANSI SPEC 7K
 Specification for Drilling and Well Servicing Equipment-Fourth Edition; ISO 14693:12/2005 Adoption; Addendum 1: 02/2006; Addendum 2: 4/2006
 
API SPEC 7K
 Specification for Drilling and Well Servicing Equipment-Fourth Edition; ISO 14693:12/2005 Adoption; Addendum 1: 02/2006; Addendum 2: 4/2006
 
API RP 2RD
 Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs)-First Edition
 
API SPEC 7-1 ADD 1
 Specification for Rotary Drill Stem Elements
 
API SPEC 8C
 Specification for Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Fourth Edition; ISO 13535:2000/ ISO 13535 Adoption; Addendum 1: 11/1/2004; Addendum 2: 04/15/2005;
 
API SPEC 17J
 Specification for Unbonded Flexible Pipe-Second Edition; Errata 5/25/2001; Addendum 1 06/2002
 
ANSI SPEC 17E
 Specification for Subsea Umbilicals-Third Edition/ ISO 13628-5 Adoption
 
API SPEC 17E
 Specification for Subsea Umbilicals-Third Edition/ ISO 13628-5 Adoption
 
API RP 2SK
 Design and Analysis of Stationkeeping Systems for Floating Structures-Third Edition
 
ANSI SPEC 5D
 Specification for Drill Pipe-Fifth Edition
 
API SPEC 5D
 Specification for Drill Pipe-Fifth Edition
 
API SPEC Q1
 Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry-Seventh Edition; Errata: August 2003/ISO TS29001 Adoption
 
API RP 5B1
 Gauging and Inspection of Casing, Tubing, and Line Pipe Threads-Fifth Edition; Addendum 1: 09/2004
 
API SPEC 14A
 Petroleum and natural gas industriesDownhole equipmentSubsurface safety valve equipment-Eleventh Edition; ISO 10432 Adoption
 
ANSI SPEC 9A
 Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption
 
API SPEC 9A
 Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption
 
API SPEC 2B
 Specification for the Fabrication of Structural Steel Pipe-Sixth Edition
 
API SPEC 12P
 Specification for Fiberglass Reinforced Plastic Tanks
 
API BULL 2V
 Design of Flat Plate Structures-Third Edition
 
API RP 14H
 Recommended Practice for Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore-Fourth Edition; ISO 10419; Errata - 1996
 
API SPEC 4F
 Specification for Drilling and Well Servicing Structures
 
API RP 2FPS
 Recommended Practice for Planning, Designing, and Construction Floating Production Systems-First Edition
 
ANSI SPEC 17F
 Specification for Subsea Production Control Systems-Second Edition
 
API SPEC 17F
 Specification for Subsea Production Control Systems-Second Edition
 
API SPEC 5LC
 Specification for CRA Line Pipe-Third Edition
 
API RP 55
 Recommended Practices for Oil and Gas Producing and Gas Processing Plant Operations Involving Hydrogen Sulfide-Second Edition
 
API RP 2X
 Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians-Fourth Edition
 
API SPEC 5LD
 Specification for CRA Clad or Lined Steel Pipe-Second Edition
 
ANSI RP 17H
 Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems-First Edition: ISO 13628-8 Adoption
 
API RP 17H
 Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems-First Edition: ISO 13628-8 Adoption
 
API BULL 2U
 Bulletin on Stability Design of Cylindrical Shells-Third Edition
 
API RP 75
 Recommended Practices for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities-Third Edition
 
API RP 5C1
 Recommended Practice for Care and Use of Casing and Tubing-Eighteenth Edition
 
API SPEC 8A
 Specification for Drilling and Production Hoisting Equipment-Thirteenth Edition; Addendum 1 May 2001
 
ANSI RP 17G
 Recommended Practice for Completion/Workover Risers-Second Edition;: 2005
 
API RP 17G
 Recommended Practice for Completion/Workover Risers-Second Edition;: 2005
 
API SPEC 16F
 Specification for Marine Drilling Riser Equipment-First Edition
 
API SPEC 2W
 Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)-Fifth Edition; Effective Date: June 2007
 
ANSI RP 5A5
 Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe-Seventh Edition; ISO 15463 Adoption
 
API RP 5A5
 Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe-Seventh Edition; ISO 15463 Adoption
 
API RP 5C6
 Welding Connections to Pipe-Second Edition
 
API RP 6DR
 Repair and Remanufacture of Pipeline Valves-First Edition; G06DR1
 
API SPEC 12B
 Specification for Bolted Tanks for Storage of Production Liquids
 
API TR 6AF2
 Technical Report on Capabilities of API Integral Flanges under Combination of Loading - Phase II-Second Edition
 
API RP 5L8
 Recommended Practice for Field Inspection of New Line Pipe-Second Edition
 
ANSI RP 11PGT
 Recommended Practice for Packaged Combustion Gas Turbines
 
API RP 11PGT
 Recommended Practice for Packaged Combustion Gas Turbines
 
API RP 5A3
 Recommended Practice on Thread Compounds for Casing, Tubing, and Line Pipe-Second Edition/ISO 13678 Adoption
 
API TR 6AF
 Technical Report on Capabilities of API Flanges under Combinations of Load-Second Edition
 
API SPEC 15HR
 Specification for High Pressure Fiberglass Line Pipe-Third Edition; Addendum: 11/2004
 
API RP 14FZ
 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations-First Edition
 
API RP 2FB
 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading-First Edition
 
ANSI RP 2T
 Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms-Second Edition
 
API RP 2T
 Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms-Second Edition
 
API RP 2L
 Recommended Practice for Planning, Designing, and Constructing Heliports for Fixed Offshore Platforms
 
API RP 8B
 Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment-Seventh Edition/ ISO 13534 Adoption; Addendum: 11/2003; Addendum 2: 4/2005
 
API SPEC 6A718
 Specification of Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment-First Edition; Errata: March 2005; Addendum: 03/31/2006
 
API RP 9B
 Recommended Practice on Application Care, and Use of Wire Rope for Oil Field Service-Twelfth Edition
 
ANSI SPEC 12GDU
 Specification for Glycol-Type Gas Dehydration Units
 
API SPEC 12GDU
 Specification for Glycol-Type Gas Dehydration Units
 
API RP 54
 Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations-Third Edition
 
API RP 2N
 Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions
 
API VT-1
 Vocational Training - Book 1 - Introduction to Oil and Gas Production-Fifth Edition
 
API RP 86
 API Recommended Practice for Measurement of Multiphase Flow-First Edition
 
API RP 59
 Recommended Practice for Well Control Operations-Second Edition
 
ANSI RP 11S4
 Recommended Practice for Sizing and Selection of Electric Submersible Pump Installations-Third Edition
 
API RP 11S4
 Recommended Practice for Sizing and Selection of Electric Submersible Pump Installations-Third Edition
 
ANSI RP 17C
 Recommended Practice on TFL (Through Flowline) Systems-Second Edition; ISO 13628-3/ISO 13628-3 Adoption
 
API RP 17C
 Recommended Practice on TFL (Through Flowline) Systems-Second Edition; ISO 13628-3/ISO 13628-3 Adoption
 
API RP 5C5
 Recommended Practice on Procedures for Testing Casing and Tubing Connections-Third Edition/ISO 13679 Adoption
 
API RP 2Z
 Recommended Practice for Preproduction Qualification for Steel Plates for Offshore Structures-Fourth Edition
 
API RP 7L
 Procedures for Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment-Addendum 1: 02/2006; Addendum 2: 4/2006
 
API SPEC 15LE
 Specification for Polyethylene Line Pipe (PE)
 
API RP 13D
 Rheology and Hydraulics of Oil-well Drilling Fluids-Fifth Edition
 
API RP 5C7
 Coiled Tubing Operations in Oil and Gas Well Services-First Edition
 
ANSI SPEC 15LR
 Specification for Low Pressure Fiberglass Line Pipe and Fittings-Seventh Edition
 
API SPEC 15LR
 Specification for Low Pressure Fiberglass Line Pipe and Fittings-Seventh Edition
 
API RP 4G
 Use and Procedures for Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures-Third Edition; Errata: 6/2004; Errata 1: 6/2004
 
API RP 5L2
 Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service-Fourth Edition
 
API RP 12N
 Recommended Practice for the Operation, Maintenance and Testing of Firebox Flame Arrestors
 
API RP 7C-11F
 Recommended Practice for Installation, Maintenance, and Operation of Internal-Combustion Engines
 
API API E5
 Environmental Guidance Document: Waste Management in Exploration and Production Operations-Second Edition
 
API RP 5UE
 Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections-Second Edition
 
API SPEC 2Y
 Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures-Fifth Editon; Effective Date: June 2007
 
API TR 6AF1
 Technical Report on Temperature Derating on API Flanges under Combination of Loading-Second Edition
 
API RP 64
 Recommended Practices for Diverter Systems Equipment and Operations-Second Edition
 
API RP 45
 Recommended Practice for Analysis of Oilfield Waters-Third Edition
 
API RP 80
 Guidelines for the Definition of Onshore Gas Gathering Lines-First Edition
 
API RP 11S3
 Recommended Practice for Electric Submersible Pump Installations-Second Edition
 
API VT-2
 Vocational Training - Book 2 - Corrosion of Oil- and Gas-Well Equipment-Second Edition
 
API RP 13B-1
 Recommended Practice Standard Procedure for Field Testing Water-Based Drilling Fluids-Third Edition; ANSI/API 13B-1/ISO 10414-1; Errata: July 2004
 
API RP 5LW
 Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels-Second Edition
 
API RP 11AR
 Recommended Practice for Care and Use of Subsurface Pumps-Fourth Edition
 
API SPEC 11E
 Specification for Pumping Units
 
ANSI SPEC 17K
 Specification for Bonded Flexible Pipe-Second Edition
 
API SPEC 17K
 Specification for Bonded Flexible Pipe-Second Edition
 
API BULL D10
 Selecting Rotary Drilling Equipment, Procedure for
 
API RP 5L9
 External Fusion Bounded Epoxy Coating of Line Pipe-First Edition
 
ANSI SPEC 12K
 Specification for Indirect Type Oil-Field Heaters
 
API SPEC 12K
 Specification for Indirect Type Oil-Field Heaters
 
API RP 5L3
 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe
 
API PUBL 4723
 Refinery Stream Speciation
 
API RP 2I
 In-Service Inspection of Mooring Hardware for Floating Drilling Units-Second Edition
 
API SPEC 10A
 Specification for Cements and Materials for Well Cementing-Twenty-Third Edition; ANSI/API 10A/ISO 10426-1-2001/ISO 10426-1 Adoption; Errata: January 2005
 
ANSI SPEC 13A
 Specification for Drilling-Fluid Materials-17th Edition
 
API SPEC 13A
 Specification for Drilling-Fluid Materials-17th Edition
 
ANSI RP 5L7
 Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe
 
API RP 5L7
 Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe
 
API STD 5T1
 Standard on Imperfection Terminology-Tenth Edition; Formerly Bull 5T1; Addendum 1: 9/2003
 
API RP 13C
 Recommended Practice for Drilling Fluid Processing Systems Evaluation-Third Edition; Replaces API RP 13E; Errata: 04/2005
 
ANSI RP 10B-2 ERTA 2
 Recommended Practice for Testing Well Cements
 
API RP 10B-2 ERTA 2
 Recommended Practice for Testing Well Cements
 
API RP 49
 Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide-Third Edition
 
API SPEC 6AV1
 Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service-First Edition; Errata - December 1996
 
ANSI BULL 11K
 Bulletin Data Sheet for the Design of Air Exchange Coolers
 
API BULL 11K
 Bulletin Data Sheet for the Design of Air Exchange Coolers
 
API BULL 2TD
 Guidelines for Tie-downs on Offshore Production Facilities for Hurricane Season-First Edition
 
API SPEC 11D1
 Petroleum and Natural Gas Industries - Downhole Equipment - Packers and Bridge Plugs-First Edition; ISO 14310:2001/ ISO 14310 Adoption
 
API WORLDWIDE CEMENTING
 Worldwide Cementing Practices First Edition
 
API SPEC 16RCD
 Specification for Drill Through Equipment Rotating Control Devices-First Edition
 
API RP 6HT
 Heat Treatment and Testing of Large Cross Section and Critical Section Components-First Edition
 
API VT-6
 Vocational Training - Book 6 - Gas Lift-Third Edition
 
API SPEC 6H
 Specification on End Closures, Connectors and Swivels
 
API MPMS 17.8
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition
 
API RP 44
 Sampling Petroleum Reservoir Fluids-Second Edition
 
API RP 95F
 Gulf of Mexico MODU Mooring Practices for the 2007 Hurricane Season?ï¿ a??a€? Interim Recommendations-SECOND EDITION
 
API RP 13B-2
 Recommended Practice for Field Testing Oil-Based Drilling Fluids-Fourth Edition
 
API BULL D16 TEMPLATE
 Suggested Procedure for Development of Spill Prevention Control and Countermeasure Plans - Plan Template-Fourth Edition
 
API SPEC 6FB
 API Specification for Fire Test for End Connections-Third Edition; Errata 08/20/2006; Supplement 12/18/2006
 
API RP 65
 Cementing Shallow Water Flow Zones in Deep Water Wells-First Edition; Errata: August 2003
 
API VT-5
 Vocational Training - Book 5 - Wireline Operations and Procedures-Third Edition
 
ANSI BULL 6J
 Bulletin on Testing of Oilfield Elastomers - A Tutorial
 
API BULL 6J
 Bulletin on Testing of Oilfield Elastomers - A Tutorial
 
API RP 90
 Annular Casing Pressure Management for Offshore Wells-First Edition
 
API RP 11S
 Recommended Practice for the Operation, Maintenance and Troubleshooting of Electric Submersible Pump Installations
 
API SPEC 12L
 Specification for Vertical and Horizontal Emulsion Treaters
 
ANSI BULL 11L3
 Sucker Rod Pumping System Design Book-Errata - November 1973, Supplement 1 - 1977 (R 1994)
 
API BULL 11L3
 Sucker Rod Pumping System Design Book-Errata - November 1973, Supplement 1 - 1977 (R 1994)
 
API SPEC 11V1
 Specification for Gas Lift Equipment
 
ANSI SPEC 6DSS
 Specification on Subsea Pipeline Valves-FIRST EDITION; CONTAINS API MONOGRAM ANNEX AS PART OF US NATIONAL ADOPTION
 
API SPEC 6DSS
 Specification on Subsea Pipeline Valves-FIRST EDITION; CONTAINS API MONOGRAM ANNEX AS PART OF US NATIONAL ADOPTION
 
ANSI RP 11L
 Recommended Practice for Design Calculations for Sucker Rod Pumping Systems (Conventional Units)-Fourth Edition
 
API RP 11L
 Recommended Practice for Design Calculations for Sucker Rod Pumping Systems (Conventional Units)-Fourth Edition
 
ANSI SPEC 2F
 Specification for Mooring Chain-Sixth Edition
 
API SPEC 2F
 Specification for Mooring Chain-Sixth Edition
 
API TR 17TR2
 The Ageing of PA-11 in Flexible Pipes-First Edition
 
API TR 6F1
 Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API Specification 6FA-Third Edition
 
API SPEC 11B
 Specification for Sucker Rods-Twenty-Sixth Edition
 
API SPEC 5LCP
 Specification for Coiled Line Pipe-Second Edition
 
API RP 51
 Onshore Oil and Gas Production Practices for Protection of the Environment-Third Edition
 
API RP 67
 Recommended Practices for Oilfield Explosives Safety-Second Edition
 
API RP 15S
 Qualification of Spoolable Reinforced Plastic Line Pipe-First Edition
 
ANSI RP 7A1
 Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections
 
API RP 7A1
 Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections
 
API SPEC 11AX
 Specification for Subsurface Sucker Rod Pumps and Fittings-Twelfth Edition
 
API SPEC 11IW
 Specification for Independent Wellhead Equipment-First Edition
 
API SPEC 11N
 Specification for Lease Automatic Custody Transfer (LACT) Equipment
 
API VT-3
 Vocational Training - Book 3 - Subsurface Salt Water Injection and Disposal-Third Edition
 
API TR 17TR3
 An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack
 
ANSI BULL 11L4
 Curves for Selecting Beam Pumping Units
 
API BULL 11L4
 Curves for Selecting Beam Pumping Units
 
API BULL D14
 Statistical Analysis of Crude Oil Recovery and Recovery Efficiency
 
ANSI RP 11BR
 Recommended Practice for Care and Handling of Sucker Rods-Eighth Edition; Supplement 1 10-1-1990; Supplement 2 7-1-1991
 
API RP 11BR
 Recommended Practice for Care and Handling of Sucker Rods-Eighth Edition; Supplement 1 10-1-1990; Supplement 2 7-1-1991
 
API SPEC 6FD
 Specification for Fire Test for Check Valves
 
API BULL E4
 Environmental Guidance Document: Release Reporting for the Oil and Gas Exploration and Production Industry as Required by the Clean Water Act, the Comprehensive Environmental Response, Compensation and Liability Act, and the Emergency Planning and Community Right-to-Know Act-Second Edition
 
API BULL E1
 Bulletin on the Generic Hazardous Chemical Category List and Inv. for the Oil and Gas Exploration and Production Ind. Superfund Amendments and Reauthorization Act of 1986, Emer. Planning & Comm. Right-to-Know Act, Title III Sec. 311 and 312
 
API BULL D16
 Suggested Procedure for Development of Spill Prevention Control and Countermeasure Plans-Third Edition
 
API BULL E2
 Bulletin on Management of Naturally Occurring Radioactive Materials (NORM) in Oil & Gas Production-Second Edition
 
API RP 17M
 Remotely Operated Tool (ROT) Intervention Systems-First Edition; ISO 13628-9:2000 Adoption
 
API SPEC 2MT1
 Specification for Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures-Second Edition
 
API TR 17TR1
 Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes-First Edition
 
API PUBL 4589
 Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations
 
API RP 11S6
 Recommended Practice for Testing of Electric Submersible Pump Cable Systems
 
API SPEC 7B-11C
 Specification for Internal-Combustion Reciprocating Engines for Oil-Field Service
 
API BULL 2S
 Design of Windlass Wildcats for Floating Offshore Structures-Second Edition
 
API RP 50
 Natural Gas Processing Plant Practices for Protection of the Environment-Second Edition
 
API RP 85
 Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems-First Edition
 
API RP 13J
 Testing of Heavy Brines-Fourth Edition
 
API RP 74
 Recommended Practice for Occupational Ssfety for Onshore Oil and Gas Production Operations-First Edition
 
API SPEC 11L6
 Specification for Electric Motor Prime Mover for Beam Pumping Unit Service-First Edition; Supplement 1 1996
 
API SPEC 6FC
 Specification for Fire Test for Valves with Automatic Backseats-Third Edition
 
API RP 11S2
 Recommended Practice for Electric Submersible Pump Testing-Second Edition; Effective Date: 10/01/1997
 
API RP 19B
 Recommended Practices for Evaluation of Well Perforators-SECOND EDITION
 
API BULL E3
 Environmental Guidance Document: Well Abandonment and Inactive Well Practices for U.S. Exploration and Production Operations-First Edition
 
API RP 76
 Contractor Safety Management for Oil and Gas Drilling and Production Operations-First Edition
 
API SPEC 14L
 Lock Mandrels and Landing Nipples-First Edition/ ISO 16070 Adoption
 
API SPEC 10D
 Specification for Bow-Spring Casing Centralizers-Sixth Edition; ANSI/API 10D/ISO 10427-1-2001/ISO 10427-1 Adoption
 
API RP 11G
 Recommended Practice for Installation and Lubrication of Pumping Units
 
API RP 11V8
 Recommended Practice for Gas Lift System Design and Performance Prediction-First Edition
 
API RP 13I
 Recommended Practice for Laboratory Testing of Drilling Fluids-Seventh Edition
 
API INTERPRETATIONS 1988
 1988 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1995
 1994 and 1995 Interpretations - Technical Publications Answers to Technical Inquiries
 
ANSI RP 11S8
 Recommended Practice on Electric Submersible Pump System Vibrations
 
API RP 11S8
 Recommended Practice on Electric Submersible Pump System Vibrations
 
API SPEC 7F
 Specification for Oil-Field Chain and Sprockets-Seventh Edition
 
API RP 11S1
 Recommended Practice for Electrical Submersible Pump Teardown Report-Third Edition
 
ANSI RP 11V6
 Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves-Second Edition
 
API RP 11V6
 Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves-Second Edition
 
API RP 10F
 Recommended Practice for Performance Testing of Cementing Float Equipment-Third Edition; ANSI/API 10F/ISO 18165-2001/ISO 18165 Adoption; Errata 2003
 
API RP 5SI
 Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier-First Edition
 
API RP T-2
 Qualification Programs for Offshore Production Personnel Who Work with Safety Devices-Second Edition
 
API RP 11V2
 Gas-Lift Valve Performance Testing-Second Edition
 
ANSI RP 11S5
 Recommended Practice for Application of Electric Submersible Cable Systems
 
API RP 11S5
 Recommended Practice for Application of Electric Submersible Cable Systems
 
API RP 70
 Security for Offshore Oil and Natural Gas Operations-First Edition
 
ANSI RP 11V7
 Recommended Practice for Repair, Testing, and Setting Gas Lift Valves-Second Edition
 
API RP 11V7
 Recommended Practice for Repair, Testing, and Setting Gas Lift Valves-Second Edition
 
API TR 6J1
 Elastomer Life Estimation Testing Procedures-First Edition
 
API SPEC 2MT2
 Rolled Shapes with Improved Notch Toughness-First Edition
 
API SPEC 7NRV
 Specification for Drill String Non-return Valves
 
API PUBL 3802
 Audit Control Cuide
 
API RP 52
 Land Drilling Practices for Protection of the Environment-Second Edition
 
API RP 95J
 Gulf of Mexico Jackup Operations for Hurricane SeasonInterim Recommendations-First Edition
 
ANSI RP 10D-2
 Recommended Practice for Centralizer Placement and Stop Collar Testing-First Edition: ISO 10427-2 Adoption
 
API RP 10D-2
 Recommended Practice for Centralizer Placement and Stop Collar Testing-First Edition: ISO 10427-2 Adoption
 
API REPORT OF LINE PIPE
 Report of Eastern and Western Hemisphere Production of Line Pipe
 
ANSI RP 11V5
 Recommended Practice for Operations, Maintenance, and Trouble-Shooting of Gas Lift Installations-Second Edition
 
API RP 11V5
 Recommended Practice for Operations, Maintenance, and Trouble-Shooting of Gas Lift Installations-Second Edition
 
API INTERPRETATIONS 1989
 1989 and 1990 Interpretations - Technical Publications Answers to Technical Inquiries
 
API REPORT OF CASING
 Report of Eastern and Western Hemisphere Production of Casing, Tubing and Drill Pipe
 
API RP 70I
 Security for Worldwide Offshore Oil and Natural Gas Operations-First Edition
 
API RP 11S7
 Recommended Practice on Application and Testing of Electric Submersible Pump Seal Chamber Sections
 
API PUBL 4615
 Emission Factors for Oil and Gas Production Operations
 
ANSI RP 11ER
 Recommended Practice for Guarding of Pumping Units
 
API RP 11ER
 Recommended Practice for Guarding of Pumping Units
 
API RP T-1
 Orientation Programs for Personnel Going Offshore for the First Time-Fourth Edition
 
ANSI BULL 11L2
 Catalog of Analog Computer Dynamometer Cards
 
API BULL 11L2
 Catalog of Analog Computer Dynamometer Cards
 
ANSI RP 13M-4
 Recommended Practice for Measuring Stimulation and Gravel-pack Fluid Leakoff Under Static Conditions-First Edition; ISO 13503-4 Adoption
 
API RP 13M-4
 Recommended Practice for Measuring Stimulation and Gravel-pack Fluid Leakoff Under Static Conditions-First Edition; ISO 13503-4 Adoption
 
API RP 56
 Recommended Practices for Testing Sand Used in Hydraulic Fracturing Operations-Second Edition
 
API RP T-6
 Training and Qualification of Personnel in Well Control Equipment and Techniques for Wireline Operations in Offshore Location-First Edition
 
API REPORT 91-48
 Growth Rate of Short Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures (Year-Two)
 
API TR 10TR3
 Technical Report on Temperatures for API Cement Operating Thickening Time Tests; 1993 Report from the API Task Group on Cementing Temperature Schedules-First Edition
 
API BULL D8
 Tabular Method for Determining the Change of the Overall Angle and Dog-Leg Severity (for Hole Inclinations up to 70 Degrees)
 
API PUBL 7103
 Management and Disposal Alternatives for Naturally Occurring Radioactive Material (NORM) Wastes in Oil Production and Gas Plant Equipment
 
ANSI RP 10B-4
 Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure-First Edition; ISO 10426-4 Adoption
 
API RP 10B-4
 Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure-First Edition; ISO 10426-4 Adoption
 
API RP 10B-5
 Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure-First Edition; ISO 10426-5 Adoption
 
ANSI RP 13K
 Recommended Practice for Chemical Analysis of Barite-Second Edition; Errata 4/25/1998
 
API RP 13K
 Recommended Practice for Chemical Analysis of Barite-Second Edition; Errata 4/25/1998
 
API RP 60
 Recommended Practices for Testing High-Strength Proppants Used in Hydraulic Fracturing Operations-Second Edition
 
API RP 15TL4
 Recommended Practice for Care and Use of Fiberglass Tubulars-Second Edition
 
ANSI RP 10B-3
 Recommended Practice on Testing of Deepwater Well Cement Formulations-First Edition; ISO 10426-3 Adoption
 
API RP 10B-3
 Recommended Practice on Testing of Deepwater Well Cement Formulations-First Edition; ISO 10426-3 Adoption
 
API BULL 91
 Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine Environment-FIRST EDITION
 
API RP 13L
 Recommended Practice for Training and Qualification of Drilling Fluid Technologists-First Edition
 
API INTERPRETATIONS 1991
 1991 Interpretations - Technical Publications Answers to Technical Inquiries
 
API RP 11T
 Recommended Practice for Installation and Operation of Wet Steam Generators
 
API RP 41
 Recommended Practice for Presenting Performance Data on Cementing and Hydraulic Fracturing Equipment-Second Edition
 
API RP 63
 Recommended Practices for Evaluation of Polymers Used in Enhanced Oil Recovery Operations-First Edition
 
ANSI RP 13M
 Recommended Practice for the Measurement of Viscous Properties of Completion Fluids-First Edition; ISO 13503-1 Adoption
 
API RP 13M
 Recommended Practice for the Measurement of Viscous Properties of Completion Fluids-First Edition; ISO 13503-1 Adoption
 
API TR 10TR2
 Shrinkage and Expansion in Oilwell Cements-First Edition
 
API REPORT 5TRSR22
 Technical Report on SR22, Supplementary Requirements for Enhanced Leak Resistance LTC-First Edition
 
API SPEC 1B
 Specification for Oil-Field V-Belt
 
API PUBL 4638
 Calculation Workbook for Oil and Gas Production Equipment Fugitive Emissions
 
API RP T-7
 Training of Personnel in Rescue of Persons in Water-Second Edition
 
API RP 11L1
 Design Calculations Conventional Socker Rod Pumping Systems
 
API RP 58
 Recommended Practices for Testing Sand Used in Gravel Packing Operations-Second Edition
 
API INTERPRETATIONS 1993
 1993 Interpretations - Technical Publications Answers to Technical Inquiries
 
API PUBL 4677
 Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains
 
API TR 10TR1
 Cement Sheath Evaluation-First Edition
 
API INTERPRETATIONS 1992
 1992 Interpretations - Technical Publications Answers to Technical Inquiries
 
API PUBL 7102
 Methods for Measuring Naturally Occurring Radioactive Materials (NORM) in Petroleum Production Equipment
 
API PUBL 3860
 Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange
 
API RP 11S2 RUSSIAN
 Recommended Practice for Electric Submersible Pump Testing-Second Edition; Effective Date: 10/01/1997
 
API RP 31A
 Standard Form for Hardcopy Presentation of Downhole Well Log Data-First Edition
 
API PUBL 3810
 CODE - Crude Oil Data Exchange Implementation Guidelines
 
API PUBL 4683
 Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities
 
API PUBL 4678
 Fugitive Emissions from Refinery Process Drains Volume II; Fundamentals of Fugitive Emissions from Refinery Process Drains
 
API PUBL 4722
 Groundwater Sensitivity Toolkit
 
API PUBL 3855
 Conventions and Implementation Guidelines for EDI Wellsite Information Transfer Specification (WITS)-Version 1.1
 
API PUBL 4663
 Remediation of Salt-Affected Soils at Oil and Gas Production Facilities-Errata 10/15/98
 
API PUBL 7101
 National Survey on Naturally Occurring Radioactive Material (NORM) in Petroleum Production and Gas Processing Facilities
 
API PUBL 4611
 Interlaboratory Study of EPA Methods 1662, 1654A, and 1663 for the Determination of Diesel, Mineral and Crude Oils in Drilling Muds from Offshore Oil and Gas Industry Discharges
 
API PUBL 7100
 A Naturally Occurring Radioactive Material (NORM) Disposal Cost Study-First Edition
 
API PUBL 3815
 COS - Crude Oil Settlements
 
API PUBL 4641
 Summary of Produced Water Toxicity Identification Evaluation Research
 
API PUBL 4680
 Amine Unit Air Emissions Model Evaluation
 
API PUBL 4731
 Light Non-Aqueous Phase Liquid (LNAPL) Parameters Database - Version 2.0 - User Guide
 
API PUBL 7104
 Proceedings of the 1995 API and GRI Naturally Occurring Radioactive Material (NORM) Conference
 
API PUBL 3820
 Grade; Gas Revenue Accounting Data Exchange; Grade User Manual
 
API PUBL 4633
 Barium in Produced Water: Fate and Effects in the Marine Environment
 
API PUBL 4662
 Evaluation of a Petroleum Production Tank Emissions Model-Appendices A, B, C, & D- October 1997
 
API PUBL 4717
 Predictors of Water-Soluble Organics (WS0s) in Produced Water - A Literature Review
 
API PUBL 4729
 Models for Design of Free-Product Recovery Systems for Petroleum Hydrocarbon Liquids
 
API PUBL 3805
 CDEX - Check Stub Data Exchange Formats
 
API PUBL 7105
 Probabilistic Estimates of Dose and Indoor Radon Concentrations Attributable to Remediated Oilfield Naturally Occuring Radioactive Material (NORM)
 
API PUBL 3865
 PIDD - Petroleum Industry Data Dicitionary-Diskette only
 API H00005
 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition
 
API H00008
 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition
 
API MPMS 1
 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
 
API MPMS 10.1
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-Second Edition
 
API MPMS 10.2
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method
 
API MPMS 10.3
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-Second Edition
 
API MPMS 10.4
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)
 
API MPMS 10.7
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration- Second Edition
 
API MPMS 10.8
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration-Second Edition
 
API MPMS 10.9
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition
 
API MPMS 11.1
 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179
 
API MPMS 11.2
 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape
 
API MPMS 11.2.2
 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June
 
API MPMS 11.2.2 ADDENDUM
 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996
 
API MPMS 11.2.2M
 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature
 
API MPMS 11.3.2.1
 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available
 
API MPMS 11.3.3.2
 Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available
 
API MPMS 12.1.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition
 
API MPMS 12.1.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition
 
API MPMS 12.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition
 
API MPMS 12.2.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition
 
API MPMS 12.2.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition
 
API MPMS 12.2.3
 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition
 
API MPMS 12.2.4
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
 
API MPMS 14.3.1
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS
 
API MPMS 14.3.3
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications
 
API MPMS 14.4
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition
 
API MPMS 14.5
 Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis-GPA STD 2172- 96
 
API MPMS 14.8
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition
 
API MPMS 17.1
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005
 
API MPMS 18.1
 Manual of Petroleum Measurement Standards Chapter 18 - Custody Transfer Section 1 - Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck-Second Edition
 
API MPMS 19.1
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition
 
API MPMS 19.1D
 Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518
 
API MPMS 19.2
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519
 
API MPMS 19.3 PART A
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART B
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART C
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART D
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART E
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART F
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition
 
API MPMS 19.3 PART G
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition
 
API MPMS 19.3 PART H
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition
 
API MPMS 19.4
 Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition
 
API MPMS 2.2A
 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition
 
API MPMS 2.2B
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition
 
API MPMS 2.2C
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption
 
API MPMS 2.2D
 Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption
 
API MPMS 2.2E
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption
 
API MPMS 2.2F
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption
 
API MPMS 20.1
 Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement
 
API MPMS 21.1
 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement
 
API MPMS 22.2
 Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003
 
API MPMS 3.1A
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition
 
API MPMS 3.1B
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition
 
API MPMS 4.1
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition
 
API MPMS 4.2
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition
 
API MPMS 4.5
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534
 
API MPMS 4.6
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition
 
API MPMS 4.7
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition
 
API MPMS 4.8
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
 
API MPMS 4.9.1
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition
 
API MPMS 4.9.2
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First
 
API MPMS 5.1
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition
 
API MPMS 5.3
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition
 
API MPMS 5.4
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition
 
API MPMS 5.5
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition
 
API MPMS 5.8
 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition
 
API MPMS 6.1
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 1 - Lease Automatic Custody Transfer (LACT) Systems-Second Edition
 
API MPMS 6.5
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition
 
API MPMS 6.7
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition
 
API MPMS 8.2
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177
 
API MPMS 8.3
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854
 
API MPMS 8.4
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition
 
API MPMS 9.1
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit
 
API MPMS 9.3
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition
 
API PUBL 2558
 Wind Tunnel Testing of External Floating-Roof Storage Tanks
 
API PUBL 4698
 A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil and Gas Production Operations
 
API RP 2556
 Correcting Gauge Tables for Incrustation
 
API RP 2SM
 Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring-First Edition
 
API STD 2555
 Method for Liquid Calibration of Tanks-ASTM D1406-65
 API H00005
 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition
 
API H00008
 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition
 
API MPMS 1
 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
 
API MPMS 11.1
 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179
 
API MPMS 11.2
 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape
 
API MPMS 11.2.2
 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June
 
API MPMS 11.2.2 ADDENDUM
 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996
 
API MPMS 11.2.2M
 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature
 
API MPMS 11.3.2.1
 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available
 
API MPMS 11.3.3.2
 Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available
 
API MPMS 12.1.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition
 
API MPMS 12.1.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition
 
API MPMS 12.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition
 
API MPMS 12.2.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition
 
API MPMS 12.2.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition
 
API MPMS 12.2.3
 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition
 
API MPMS 12.2.4
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
 
API MPMS 14.3.1
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS
 
API MPMS 14.3.3
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications
 
API MPMS 14.4
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition
 
API MPMS 14.5
 Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis-GPA STD 2172- 96
 
API MPMS 14.8
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition
 
API MPMS 17.1
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005
 
API MPMS 2.2A
 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition
 
API MPMS 2.2B
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition
 
API MPMS 2.2C
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption
 
API MPMS 2.2D
 Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption
 
API MPMS 2.2E
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption
 
API MPMS 2.2F
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption
 
API MPMS 2.7
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition
 
API MPMS 2.8A
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition
 
API MPMS 20.1
 Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement
 
API MPMS 21.1
 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement
 
API MPMS 22.2
 Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003
 
API MPMS 3.1A
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition
 
API MPMS 3.1B
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition
 
API MPMS 3.2
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 2 - Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars-First Edition; Replaces STD 2545
 
API MPMS 3.3
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 3 - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging-First Edition; Replaces STD 2545
 
API MPMS 3.5
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging-First Edition
 
API MPMS 4.1
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition
 
API MPMS 4.2
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition
 
API MPMS 4.5
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534
 
API MPMS 4.6
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition
 
API MPMS 4.7
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition
 
API MPMS 4.8
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
 
API MPMS 4.9.1
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition
 
API MPMS 4.9.2
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First
 
API MPMS 5.1
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition
 
API MPMS 5.3
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition
 
API MPMS 5.4
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition
 
API MPMS 5.5
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition
 
API MPMS 5.6
 Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006
 
API MPMS 5.8
 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition
 
API MPMS 8.2
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177
 
API MPMS 8.3
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854
 
API MPMS 8.4
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition
 
API MPMS 9.1
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit
 
API MPMS 9.2
 Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition
 
API MPMS 9.3
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition
 
API STD 2551
 Standard Method for Measurement and Calibration of Horizontal Tanks-ASTM D1410
 API H00005
 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition
 
API H00008
 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition
 
API MPMS 1
 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
 
API MPMS 10.1
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-Second Edition
 
API MPMS 10.2
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method
 
API MPMS 10.3
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-Second Edition
 
API MPMS 10.4
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)
 
API MPMS 10.9
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition
 
API MPMS 11.1
 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179
 
API MPMS 11.2
 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape
 
API MPMS 11.2.2
 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June
 
API MPMS 11.2.2 ADDENDUM
 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996
 
API MPMS 11.2.2M
 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature
 
API MPMS 11.3.2.1
 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available
 
API MPMS 11.3.3.2
 Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available
 
API MPMS 12.1.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition
 
API MPMS 12.1.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition
 
API MPMS 12.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition
 
API MPMS 12.2.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition
 
API MPMS 12.2.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition
 
API MPMS 12.2.3
 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition
 
API MPMS 12.2.4
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
 
API MPMS 14.4
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition
 
API MPMS 14.8
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition
 
API MPMS 15
 Manual of Petroleum Measurement Standards Chapter 15 - Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries-API PUBL 2564
 
API MPMS 16.2
 Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition
 
API MPMS 17.1
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005
 
API MPMS 17.2
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000
 
API MPMS 17.3
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992
 
API MPMS 17.4
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)
 
API MPMS 17.5
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition
 
API MPMS 17.6
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition
 
API MPMS 17.7
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)
 
API MPMS 17.8
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition
 
API MPMS 17.9
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition
 
API MPMS 19.1
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition
 
API MPMS 19.2
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519
 
API MPMS 2.2E
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption
 
API MPMS 2.7
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition
 
API MPMS 2.8A
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition
 
API MPMS 3.1A
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition
 
API MPMS 3.1B
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition
 
API MPMS 3.5
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging-First Edition
 
API MPMS 4.1
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition
 
API MPMS 4.2
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition
 
API MPMS 4.5
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534
 
API MPMS 4.6
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition
 
API MPMS 4.7
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition
 
API MPMS 4.8
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
 
API MPMS 4.9.1
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition
 
API MPMS 4.9.2
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First
 
API MPMS 5.1
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition
 
API MPMS 5.3
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition
 
API MPMS 5.4
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition
 
API MPMS 5.5
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition
 
API MPMS 5.6
 Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006
 
API MPMS 5.8
 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition
 
API MPMS 6.5
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition
 
API MPMS 6.7
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition
 
API MPMS 8.2
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177
 
API MPMS 8.3
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854
 
API MPMS 8.4
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition
 
API MPMS 9.1
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit
 
API MPMS 9.2
 Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition
 
API MPMS 9.3
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition
 
API PUBL 2514A
 Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations-Second Edition
 
API PUBL 2524
 Impact Assessment of New Data on the Validity of American Petroleum Institute Marine Transfer Operation Emission Factors
 
API STD 1163
 In-line Inspection Systems Qualification Standard-First Edition
 API H00005
 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition
 
API H00008
 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition
 
API MPMS 1
 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
 
API MPMS 10.5
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 5 - Standard Test Method of Water in Petroleum Products and Bituminous Materials by Distillation-Fourth Edition
 
API MPMS 10.6
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-Fourth Edition
 
API MPMS 11.1
 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179
 
API MPMS 11.2
 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape
 
API MPMS 11.2.2
 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June
 
API MPMS 11.2.2 ADDENDUM
 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996
 
API MPMS 11.2.2M
 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature
 
API MPMS 11.3.2.1
 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available
 
API MPMS 11.3.3.2
 Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available
 
API MPMS 12.1.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition
 
API MPMS 12.1.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition
 
API MPMS 12.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition
 
API MPMS 12.2.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition
 
API MPMS 12.2.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition
 
API MPMS 12.2.3
 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition
 
API MPMS 12.2.4
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
 
API MPMS 14.3.1
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS
 
API MPMS 14.3.3
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications
 
API MPMS 14.4
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition
 
API MPMS 14.8
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition
 
API MPMS 16.2
 Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition
 
API MPMS 17.1
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005
 
API MPMS 17.2
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000
 
API MPMS 17.3
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992
 
API MPMS 17.4
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)
 
API MPMS 17.5
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition
 
API MPMS 17.6
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition
 
API MPMS 17.7
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)
 
API MPMS 17.8
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition
 
API MPMS 17.9
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition
 
API MPMS 19.1
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition
 
API MPMS 19.1D
 Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518
 
API MPMS 19.2
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519
 
API MPMS 19.3 PART A
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART B
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART C
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART D
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART E
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART F
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition
 
API MPMS 19.3 PART G
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition
 
API MPMS 19.3 PART H
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition
 
API MPMS 19.4
 Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition
 
API MPMS 2.2A
 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition
 
API MPMS 2.2B
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition
 
API MPMS 2.2C
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption
 
API MPMS 2.2D
 Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption
 
API MPMS 2.2E
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption
 
API MPMS 2.2F
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption
 
API MPMS 2.7
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition
 
API MPMS 2.8A
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition
 
API MPMS 21.1
 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement
 
API MPMS 22.2
 Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003
 
API MPMS 3.1A
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition
 
API MPMS 3.1B
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition
 
API MPMS 4.1
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition
 
API MPMS 4.4
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers-Second Edition
 
API MPMS 4.9.1
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition
 
API MPMS 4.9.2
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First
 
API MPMS 5.1
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition
 
API MPMS 5.3
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition
 
API MPMS 5.4
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition
 
API MPMS 5.5
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition
 
API MPMS 5.6
 Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006
 
API MPMS 5.8
 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition
 
API MPMS 6.2
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 2 - Loading-Rack Metering Systems-Third Edition
 
API MPMS 6.4
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Section 4 - Metering Systems for Aviation Fueling Facilities-First Edition
 
API MPMS 6.5
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition
 
API MPMS 8.2
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177
 
API MPMS 8.3
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854
 
API MPMS 8.4
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition
 
API MPMS 9.1
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit
 
API MPMS 9.2
 Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition
 
API MPMS 9.3
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition
 
API PUBL 1835
 Study of Used Motor Oil Recycling in Eleven Selected Countries
 
API PUBL 2558
 Wind Tunnel Testing of External Floating-Roof Storage Tanks
 
API STD 2554
 Measurement and Calibration of Tank Cars-ASTM D1409
 API H00005
 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition
 
API H00008
 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition
 
API MPMS 1
 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
 
API MPMS 10.1
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-Second Edition
 
API MPMS 10.2
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method
 
API MPMS 10.3
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-Second Edition
 
API MPMS 10.4
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)
 
API MPMS 10.5
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 5 - Standard Test Method of Water in Petroleum Products and Bituminous Materials by Distillation-Fourth Edition
 
API MPMS 10.6
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-Fourth Edition
 
API MPMS 10.7
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration- Second Edition
 
API MPMS 10.8
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration-Second Edition
 
API MPMS 10.9
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition
 
API MPMS 11.1
 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179
 
API MPMS 11.2
 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape
 
API MPMS 11.2.2
 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June
 
API MPMS 11.2.2 ADDENDUM
 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996
 
API MPMS 11.2.2M
 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature
 
API MPMS 11.3.2.1
 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available
 
API MPMS 11.3.3.2
 Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available
 
API MPMS 12.1.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition
 
API MPMS 12.1.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition
 
API MPMS 12.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition
 
API MPMS 12.2.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition
 
API MPMS 12.2.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition
 
API MPMS 12.2.3
 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition
 
API MPMS 12.2.4
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
 
API MPMS 14.3.1
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS
 
API MPMS 14.3.3
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications
 
API MPMS 14.4
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition
 
API MPMS 14.8
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition
 
API MPMS 15
 Manual of Petroleum Measurement Standards Chapter 15 - Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries-API PUBL 2564
 
API MPMS 16.2
 Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition
 
API MPMS 17.1
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005
 
API MPMS 17.2
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000
 
API MPMS 17.3
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992
 
API MPMS 17.4
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)
 
API MPMS 17.5
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition
 
API MPMS 17.6
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition
 
API MPMS 17.7
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)
 
API MPMS 17.8
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition
 
API MPMS 17.9
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition
 
API MPMS 18.1
 Manual of Petroleum Measurement Standards Chapter 18 - Custody Transfer Section 1 - Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck-Second Edition
 
API MPMS 19.1
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition
 
API MPMS 19.1D
 Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518
 
API MPMS 19.2
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519
 
API MPMS 19.3 PART A
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART B
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART C
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART D
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART E
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART F
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition
 
API MPMS 19.3 PART G
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition
 
API MPMS 19.3 PART H
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition
 
API MPMS 19.4
 Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition
 
API MPMS 2.2A
 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition
 
API MPMS 2.2B
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition
 
API MPMS 2.2C
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption
 
API MPMS 2.2D
 Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption
 
API MPMS 2.2E
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption
 
API MPMS 2.2F
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption
 
API MPMS 20.1
 Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement
 
API MPMS 21.1
 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement
 
API MPMS 22.2
 Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003
 
API MPMS 3.1A
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition
 
API MPMS 3.1B
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition
 
API MPMS 4.1
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition
 
API MPMS 4.2
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition
 
API MPMS 4.4
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers-Second Edition
 
API MPMS 4.5
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534
 
API MPMS 4.6
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition
 
API MPMS 4.7
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition
 
API MPMS 4.8
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
 
API MPMS 4.9.1
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition
 
API MPMS 4.9.2
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First
 
API MPMS 5.1
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition
 
API MPMS 5.3
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition
 
API MPMS 5.4
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition
 
API MPMS 5.5
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition
 
API MPMS 5.6
 Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006
 
API MPMS 5.8
 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition
 
API MPMS 6.1
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 1 - Lease Automatic Custody Transfer (LACT) Systems-Second Edition
 
API MPMS 6.2
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 2 - Loading-Rack Metering Systems-Third Edition
 
API MPMS 6.4
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Section 4 - Metering Systems for Aviation Fueling Facilities-First Edition
 
API MPMS 6.5
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition
 
API MPMS 6.6
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 6 - Pipeline Metering Systems-Second Edition
 
API MPMS 6.7
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition
 
API MPMS 7
 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination-First Edition; Supersedes Chapter 7, Section 1, 2, 3 and 4
 
API MPMS 8.2
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177
 
API MPMS 8.3
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854
 
API MPMS 8.4
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition
 
API MPMS 9.1
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit
 
API MPMS 9.2
 Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition
 
API MPMS 9.3
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition
 
API PUBL 1158
 Analysis of DOT Reportable Incidents for Hazardous Liquid Pipelines, 1986 Through 1996
 
API PUBL 1161
 Guidance Document for the Qualification of Liquid Pipeline Personnel- First Edition
 
API PUBL 2558
 Wind Tunnel Testing of External Floating-Roof Storage Tanks
 
API RP 2556
 Correcting Gauge Tables for Incrustation
 
API STD 2551
 Standard Method for Measurement and Calibration of Horizontal Tanks-ASTM D1410
 
API STD 2555
 Method for Liquid Calibration of Tanks-ASTM D1406-65
 
API COKE DRUM SURVEY
 1996 API Coke Drum Survey
 
API H00005
 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition
 
API H00008
 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition
 
API MPMS 1
 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
 
API MPMS 10.1
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-Second Edition
 
API MPMS 10.2
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method
 
API MPMS 10.3
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-Second Edition
 
API MPMS 10.4
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)
 
API MPMS 10.5
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 5 - Standard Test Method of Water in Petroleum Products and Bituminous Materials by Distillation-Fourth Edition
 
API MPMS 10.6
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-Fourth Edition
 
API MPMS 10.7
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration- Second Edition
 
API MPMS 10.8
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration-Second Edition
 
API MPMS 10.9
 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition
 
API MPMS 11.1
 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179
 
API MPMS 11.2
 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape
 
API MPMS 11.2.2
 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June
 
API MPMS 11.2.2 ADDENDUM
 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996
 
API MPMS 11.2.2M
 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature
 
API MPMS 11.3.2.1
 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available
 
API MPMS 11.3.3.2
 Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available
 
API MPMS 12.1.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition
 
API MPMS 12.1.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition
 
API MPMS 12.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition
 
API MPMS 12.2.1
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition
 
API MPMS 12.2.2
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition
 
API MPMS 12.2.3
 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition
 
API MPMS 12.2.4
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
 
API MPMS 14.3.1
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS
 
API MPMS 14.3.3
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications
 
API MPMS 14.4
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition
 
API MPMS 14.8
 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition
 
API MPMS 16.2
 Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition
 
API MPMS 17.1
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005
 
API MPMS 17.2
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000
 
API MPMS 17.3
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992
 
API MPMS 17.4
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)
 
API MPMS 17.5
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition
 
API MPMS 17.6
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition
 
API MPMS 17.7
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)
 
API MPMS 17.8
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition
 
API MPMS 17.9
 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition
 
API MPMS 19.1
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition
 
API MPMS 19.1D
 Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518
 
API MPMS 19.2
 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519
 
API MPMS 19.3 PART A
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART B
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART C
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART D
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART E
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition
 
API MPMS 19.3 PART F
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition
 
API MPMS 19.3 PART G
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition
 
API MPMS 19.3 PART H
 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition
 
API MPMS 19.4
 Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition
 
API MPMS 2.2A
 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition
 
API MPMS 2.2B
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition
 
API MPMS 2.2C
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption
 
API MPMS 2.2D
 Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption
 
API MPMS 2.2E
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption
 
API MPMS 2.2F
 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption
 
API MPMS 2.7
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition
 
API MPMS 2.8A
 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition
 
API MPMS 21.1
 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement
 
API MPMS 22.2
 Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003
 
API MPMS 3.1A
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition
 
API MPMS 3.1B
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition
 
API MPMS 3.2
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 2 - Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars-First Edition; Replaces STD 2545
 
API MPMS 3.3
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 3 - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging-First Edition; Replaces STD 2545
 
API MPMS 3.5
 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging-First Edition
 
API MPMS 4.1
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition
 
API MPMS 4.2
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition
 
API MPMS 4.5
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534
 
API MPMS 4.6
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition
 
API MPMS 4.7
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition
 
API MPMS 4.8
 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
 
API MPMS 4.9.1
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition
 
API MPMS 4.9.2
 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First
 
API MPMS 5.1
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition
 
API MPMS 5.3
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition
 
API MPMS 5.4
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition
 
API MPMS 5.5
 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition
 
API MPMS 5.6
 Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006
 
API MPMS 5.8
 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition
 
API MPMS 6.2
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 2 - Loading-Rack Metering Systems-Third Edition
 
API MPMS 6.5
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition
 
API MPMS 6.7
 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition
 
API MPMS 8.2
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177
 
API MPMS 8.3
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854
 
API MPMS 8.4
 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition
 
API MPMS 9.1
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit
 
API MPMS 9.2
 Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition
 
API MPMS 9.3
 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition
 
API PUBL 2558
 Wind Tunnel Testing of External Floating-Roof Storage Tanks
 
API RP 571
 Damage Mechanisms Affecting Fixed Equipment in the Refining Industry-First Edition
 
API STD 2554
 Measurement and Calibration of Tank Cars-ASTM D1409
 
API API 510
 Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration-Eighth Edition; Addendum 1 December 1998; Addendum 2 December 2000; Addendum 3 December 2001; Addendum 4 August 2003
 
API API 570
 Piping Inspection Code Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems-Second Edition; Addendum 1 - February 2000; Addendum 2 - December 2001; Addendum 3 - August 2003
 
API FINAL REPORT 1996
 Final Report 1996 American Petroleum Institute/National Petroleum Refiners Association Survey of Refining Operations and Product Quality
 
API INTERPRETATIONS 1988
 1988 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1989
 1989 and 1990 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1991
 1991 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1992
 1992 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1993
 1993 Interpretations - Technical Publications Answers to Technical Inquiries
 
API INTERPRETATIONS 1995
 1994 and 1995 Interpretations - Technical Publications Answers to Technical Inquiries
 
API MPMS 12.2.5
 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
 
API PUBL 1210
 Trainer Competencies API Central Committee on Training and Development-First Edition
 
API PUBL 337
 Development of Emission Factors for Leaks in Refinery Components in Heavy Liquid Service
 
API PUBL 3802
 Audit Control Cuide
 
API PUBL 3810
 CODE - Crude Oil Data Exchange Implementation Guidelines
 
API PUBL 3820
 Grade; Gas Revenue Accounting Data Exchange; Grade User Manual
 
API PUBL 3855
 Conventions and Implementation Guidelines for EDI Wellsite Information Transfer Specification (WITS)-Version 1.1
 
API PUBL 3860
 Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange
 
API PUBL 422
 Groundwater Protection Programs for Petroleum Refining and Storage Facilities: A Guidance Document
 
API PUBL 4261
 Alcohols and Ethers a Technical Assessment of Their Application as Fuels and Fuel Components-Third Edition
 
API PUBL 4262
 Methanol Vehicle Emissions
 
API PUBL 4587
 Remote Sensing Feasibility Study of Refinery Fenceline Emissions
 
API PUBL 4612
 Study of Refinery Fugitive Emissions from Equipment Leaks
 
API PUBL 4613
 Study of Refinery Fugitive Emissions from Equipment Leaks Appendices
 
API PUBL 4639
 Estimation of Fugitive Emissions from Petroleum Refinery Process Drains Phase I Report
 
API PUBL 4700
 Primer for Evaluating Ecological Risk at Petroleum Release Sites
 
API PUBL 534
 Heat Recovery Steam Generators First Edition-First Edition
 
API PUBL 581
 Risk-Based Inspection Base Resource Document-First Edition
 
API PUBL 760
 Model Risk Management Plan Guidance for Petroleum Refineries Guidance in Complying with EPA?′s RMP Rule (40 Code of Federal Regulations, Part 68)- Third Edition
 
API PUBL 800
 Literature Survey Subsurface and Groundwater Protection Related to Petroleum Refinery Operations
 
API PUBL 850
 API Standards 620, 650, and 653 Interpretations - Tank Construction and In-Service Inspection-Answers to Technical Inquiries; First Edition
 
API PUBL 932- A
 A Study of Corrosion in Hydroprocess Reactor Effluent Air Cooler Systems
 
API PUBL 937
 Evaluation of Design Criteria for Storage Tanks with Frangible Roof Joints
 
API PUBL 937- A
 Study to Establish Relations for the Relative Strength of API 650 Cone Roof Roof-to-Shell and Shell-to-Bottom Joints
 
API PUBL 938
 Experimental Study of Causes and Repair of Cracking of 1 1/4Cr- 1/2Mo Steel Equipment
 
API PUBL 939- B
 Repair and Remediation Strategies for Equipment Operating in Wet H2S Service
 
API PUBL 959
 Characterization Study of Temper Embrittlement of Chromium- Molybdenum Steels
 
API RP 2021
 Management of Atmospheric Storage Tank Fires-Fourth Edition
 
API RP 2030
 Application of Fixed Water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries
 
API RP 500
 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2-First Edition; Errata 10/17/1998
 
API RP 505
 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2-First Edition; Errata 8/17/98
 
API RP 520 PT I
 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries; Part I - Sizing and Selection-Seventh Edition
 
API RP 520 PT II
 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II - Installation-Fifth Edition
 
API RP 521
 Guide for Pressure-Relieving and Depressuring Systems-Fourth Edition; Errata February 15, 1999
 
API RP 531M
 Measurement of Noise from Fired Process Heaters
 
API RP 535
 Burners for Fired Heaters in General Refinery Services-Second Edition
 
API RP 536
 Post-Combustion NOx Control for Fired Equipment in General Refinery Services-First Edition
 
API RP 540
 Electrical Installations in Petroleum Processing Plants-Fourth Edition
 
API RP 551
 Process Measurement Instrumentation
 
API RP 552
 Transmission Systems-First Edition
 
API RP 553
 Refinery Control Valves-First Edition
 
API RP 554
 Process Instrumentation and Control-First Edition
 
API RP 555
 Process Analyzers-Second Edition
 
API RP 556
 Instrumentation and Control Systems for Fired Heaters and Steam Generators-First Edition
 
API RP 557
 Guide to Advanced Control Systems-First Edition
 
API RP 571
 Damage Mechanisms Affecting Fixed Equipment in the Refining Industry-First Edition
 
API RP 572
 Inspection of Pressure Vessels (Towers, Drums, Reactors, Heat Exchangers, and Condensers)-Second Edition
 
API RP 573
 Inspection of Fired Boilers and Heaters-Second Edition
 
API RP 574
 Inspection Practices for Piping System Components-Second Edition
 
API RP 575
 Guidelines and Methods for Inspection of Existing Atmospheric and Low-Pressure Storage Tanks-Second Edition
 
API RP 576
 Inspection of Pressure-Relieving Devices-Second Edition
 
API RP 577
 Welding Inspection and Metallurgy-First Edition
 
API RP 578
 Material Verification Program for New and Existing Alloy Piping Systems-First Edition
 
API RP 579
 Fitness-for-Service-First Edition; Errata March 2000
 
API RP 580
 Risk-Based Inspection-First Edition
 
API RP 582
 Welding Guidelines for the Chemical, Oil, and Gas Industries-First Edition
 
API RP 591
 Process Valve Qualification Procedure-Third Edition
 
API RP 621
 Reconditioning of Metallic Gate, Globe, and Check Valves-Second Edition
 
API RP 651
 Cathodic Protection of Aboveground Petroleum Storage Tanks-Second Edition
 
API RP 652
 Linings of Aboveground Petroleum Storage Tank Bottoms-Third Edition
 
API RP 683
 Quality Improvement Manual for Mechanical Equipment in Petroleum, Chemical, and Gas Industries
 
API RP 684
 Paragraphs Rotodynamic Tutorial: Lateral Critical Speeds, Unbalance Response, Stability, Train Torsionals and Rotor Balancing-Second Edition
 
API RP 686
 Recommended Practices for Machinery Installation and Installation Design-First Edition
 
API RP 687
 Rotor Repair-First Edition
 
API RP 751
 Safe Operation of Hydrofluoric Acid Alkylation Units-Second Edition
 
API RP 752
 Management of Hazards Associated with Location of Process Plant Buildings-Second Edition
 
API RP 932- B
 Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems-First Edition
 
API RP 934
 Materials and Fabrication Requirements for 2-1/4Cr-1Mo and 3Cr-1Mo Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hyrdogen Service- First Edition
 
API RP 936
 Refractory Installation Quality Control Guidelines-Inspection and Testing Monolithic Refractory Linings and Materials-Second Edition
 
API RP 941
 Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants-Sixth Edition
 
API RP 945
 Avoiding Environmental Cracking in Amine Units-Third Edition
 
API STD 2000
 Venting Atmospheric and Low-Pressure Storage Tanks Nonrefrigerated and Refrigerated-Fifth Edition; Errata 11/15/1999
 
API STD 2510
 Design and Construction of LPG Installations-Eighth Edition
 
API STD 2610
 Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities-Second Edition
 
API STD 526
 Flanged Steel Pressure Relief Valves-Fifth Edition
 
API STD 527
 Seat Tightness of Pressure Relief Valves
 
API STD 530
 Calculation of Heater-Tube Thickness in Petroleum Refineries-Fifth Edition; ISO 13704:2001/ISO 13704 Adoption; Errata 1:3/01/04
 
API STD 537
 Flare Details for General Refinery and Petrochemical Service-First Edition
 
API STD 541
 Form-Wound Squirrel-Cage Induction Motors - 500 Horsepower and Larger-Fourth Edition
 
API STD 546
 Brushless Synchronous Machines - 500 kVA and Larger-Second Edition
 
API STD 547
 General-purpose Form-wound Squirrel Cage Induction Motors 250 Horsepower and Larger-First Edition
 
API STD 560
 Fired Heaters for General Refinery Services-Third Edition; Errata: January 2002
 
API STD 589
 Fire Test for Evaluation of Valve Stem Packing-Second Edition
 
API STD 594
 Check Valves: Flanged, Lug, Wafer and Butt-welding-Sixth Edition
 
API STD 598
 Valve Inspection and Testing-Eighth Edition
 
API STD 599
 Metal Plug Valves - Flanged, Threaded and Welding Ends-Fifth Edition
 
API STD 600
 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries-Eleventh Edition; ISO 10434:1998/ ISO 10434 Adoption
 
API STD 602
 Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries-Eighth Edition; ISO 15761 Adoption
 
API STD 603
 Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt- Welding Ends-Sixth Edition
 
API STD 607
 Fire Test for Soft-Seated Quarter-Turn Valves-Fifth Edition; ISO 10497- 5:2004 Adoption
 
API STD 608
 Metal Ball Valves - Flanged, Threaded, and Welding End-Third Edition
 
API STD 609
 Butterfly Valves: Double Flanged, Lug- and Wafer-Type-Sixth Edition
 
API STD 610
 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; ISO 13709 Adoption
 
API STD 611
 General-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services-Fourth Edition
 
API STD 612
 Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications-Sixth Edition
 
API STD 613
 Special Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services-Fifth Edition
 
API STD 614
 Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services-Fourth Edition
 
API STD 616
 Gas Turbines for Petroleum, Chemical, and Gas Industry Services- Fourth Edition
 
API STD 617
 Axial and Centrifugal Compressors and Expander-Compressors for Petroleum, Chemical and Gas Industry Services-Seventh Edition; Errata: June 1, 2003
 
API STD 618
 Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services
 
API STD 619
 Rotary-Type Positive-Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries-Fourth Edition
 
API STD 620
 Design and Construction of Large, Welded, Low-Pressure Storage Tanks-Tenth Edition; Addendum 1: June 2004
 
API STD 650
 Welded Steel Tanks for Oil Storage-Tenth Edition; Addendum 1, January 2000; Addendum 2, November 2001; Addendum 3, September 2003
 
API STD 653
 Tank Inspection, Repair, Alteration, and Reconstruction-Third Edition; Addendum 1: 9/2003; Addendum 2: 11/2005
 
API STD 660
 Shell-and-Tube Heat Exchangers for General Refinery Services- Seventh Edition/ ISO 16812 Adoption
 
API STD 661
 Air-Cooled Heat Exchangers for General Refinery Service-Fifth Edition; ISO 13706: 2000/ISO 13706 Adoption
 
API STD 662
 Plate Heat Exchangers for General Refinery Services-Second Edition; ISO 15547: 2000/ISO 15547 Adoption
 
API STD 670
 Machinery Protection Systems-Fourth Edition
 
API STD 671
 Special-Purpose Couplings for Petroleum, Chemical, and Gas Industry Services-Third Edition
 
API STD 672
 Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services-Fourth Edition
 
API STD 673
 Centrifugal Fans for Petroleum, Chemical and Gas for Industry Services-Second Edition; Errata: 10/2002
 
API STD 674
 Positive Displacement Pumps - Reciprocating
 
API STD 675
 Positive Displacement Pumps - Controlled Volume
 
API STD 676
 Positive Displacement Pumps - Rotary-Errata; 06/15/1999
 
API STD 677
 General Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services-Second Edition
 
API STD 681
 Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services-First Edition
 
API STD 682
 Pumps Shaft Sealing Systems for Centrifugal and Rotary Pumps-Third Edition; ISO 21049 Adoption
 
API STD 685
 Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services Downstream Segment
 
API TR 938- C
 Use of Duplex Stainless Steels in the Oil Refining Industry-First Edition
 
API TR 939- D
 Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol: Review and Survey
 
API TR 997
 Comprehensive Report of API Crude Oil Characterization Measurements-First Edition

API REPORT 1
 Orifice Coefficients for Two-Phase Flow Through Velocity Controlled Subsurface Safety Valves
 
API REPORT 10
 Development of Methods to Predict Pressure Drop and Closure Conditions for Velocity-Type Subsurface Safety Valves
 
API REPORT 11
 Field Tests of Small-Scale Pile Segments in a Soft Clay Deposit under Repeated Axial Loading
 
API REPORT 1114- 5
 Ultrasonic Testing Requirements for Single-Sided Butt Welds in Offshore Fabrications
 
API REPORT 117
 Thermal Properties of Hydrocarbon Bearing Rocks at High Temperatures and Pressures
 
API REPORT 118
 Tests of Fabricated Tubular Columns
 
API REPORT 119
 Ground Motion Intensity Factors and Acceleration Response Spectra Ninth Edition API RP 2A Earthquake Design Provisions Eastern Gulf of Alaska Region
 
API REPORT 12
 Influence of Sea Water and Cathodic Protection upon Fatigue of Welded Steel Plates, as Applicable to Offshore Structures
 
API REPORT 120
 Bending Moment Capacity Calculations for Special API Clamp/Hub Combinations
 
API REPORT 13
 Cyclic Lateral Loading of Piles; Analysis of Centrifuge Tests- Errata
 
API REPORT 13
 Axially-Loaded Centrifuge Pile Tests
 
API REPORT 13- A
 Analysis of Centrifuge Pile Tests; Simulation of Pile-Driving
 
API REPORT 14
 Inelastic Cyclic Behavior of Tubular Braced Frames
 
API REPORT 15
 Probability-Based Fatigue Design Criteria for Offshore Structures
 
API REPORT 16
 Local Buckling of Cylindrical Tubular Columns Made of A-36 Steel
 
API REPORT 17
 Review of Gas Analysis Techniques for Application to Combustible Gas Detectors
 
API REPORT 19
 Strain Gage Test Results for Proposed 1-13/16 and 7-1/16 30,000 psi Rated API Flanges
 
API REPORT 2
 Condensed Version of Detection and Prevention of Sand Erosion of Production Equipment
 
API REPORT 2
 Detection and Prevention of Sand Erosion of Production Equipment
 
API REPORT 26
 Stage II - Time History Analyses Earthquake Analytical Studies for Offshore Structures
 
API REPORT 26
 Stage 1 - Baseline Analysis Earthquake Analysis Studies for Offshore Stuctures
 
API REPORT 3
 Oil Analysis in Production Discharges
 
API REPORT 4
 Corrosion Fatigue of Cathodically Protected, Welded Carbon Steel in Cold Seawater
 
API REPORT 5
 Study of Pressure Drop and Closure Forces in Velocity-Type Subsurface Safety Valves
 
API REPORT 6
 Design of Fittings to Reduce Wear Caused by Sand Erosion
 
API REPORT 7
 Cyclic Deformations of Offshore Structures on Clay
 
API REPORT 7
 Horizontal Cyclic load Behavior of Small Scale Piles and Footings on Clay Foundations
 
API REPORT 7
 Characterization of Soil Behavior Under Cyclic Loading as Applied to the Foundation Design of Offshore Structures
 
API REPORT 78- 18
 Strain Gage Test Results for Proposed 1-13/16 and 7-1/16 30,000 psi Rated API Flanges
 
API REPORT 79- 12
 Influence of Sea Water and Cathodic Protection upon Fatigue of Welded Steel Plates as Applicable to Offshore Structures
 
API REPORT 79- 14
 Cyclic Inelastic Bahavior of Steel Offshore Structures
 
API REPORT 79- 20
 The Propagating Buckle in Marine Pipelines
 
API REPORT 79- 21
 Analysis of Flange and Clamp Joints Exposed to a Fire Environment
 
API REPORT 79- 22
 Applicability of Reliability Analysis in Offshore Design Practice
 
API REPORT 79- 23
 Development of an Analytical Model for the Ultimate Capacity of Axially Loaded Grouted Pile to Jacket Connections
 
API REPORT 79- 24
 Plant Uptake and Accumulation of Metals Derived from Drilling Fluids
 
API REPORT 79- 25
 Inelastic Structural Modeling of Braced Offshore Platforms for Seismic Loading
 
API REPORT 79- 27
 Establishment Parameters to Which Gas Detector Equipment is Exposed in Offshore Oil and Gas Production Operations
 
API REPORT 79- 28
 Review of the State-of-the-Art of Probabilistic Oil Spill Simulation
 
API REPORT 79- 28
 Review of the State-of-the-Art of Oil Spill Simulation Models Phase I
 
API REPORT 79- 28
 Review of the State-of-the-Art of Oil Spill Simulation Models
 
API REPORT 79- 28
 Review of the State-of-the-Art of Oil Spill Simulation Models Phase II
 
API REPORT 8
 Centrifuge Studies of Cyclic Lateral Load-Displacement Behavior of Single Piles
 
API REPORT 80/27
 Cyclic Inelastic Bahavior of Steel Offshore Structures
 
API REPORT 80- 15
 Probability-Based Fatigue Design Criteria for Offshore Structures
 
API REPORT 80- 22
 Guidelines for Calibrating API RP2A for Reliability-Based Design
 
API REPORT 80- 24
 Agronomic Impacts Resulting from Land Disposal of Used Drilling Fluids and Cuttings
 
API REPORT 80- 26A
 Acceleration Time Histories for Earthquake Analysis Studies of Offshore Structures
 
API REPORT 80- 26B
 Earthquake Analysis Studies for Offshore Structures Stage II - Time History Analysis
 
API REPORT 80- 29
 Review and Compilation of File Test Results Axial File Capacity
 
API REPORT 80- 30A
 Collapse Performance of HC-95 Casing
 
API REPORT 80- 30B
 Collapse Resistance of Mill Selected High Collapse Grade 95 Casing
 
API REPORT 80- 31
 Hydrodynamic Coefficients for Cylinders with Pronounced Marine Growths
 
API REPORT 80- 31B
 Hydrodynamic Coefficients for Cylinders with Pronounced Marine Growths
 
API REPORT 80- 32
 Shaking Table Tests of a Tubular Steel Frame Model
 
API REPORT 80- 33
 Effects of Fire Environment on Pressure Capability of Standard API and ANSI Connections
 
API REPORT 80- 34
 Spectrum Fatique Properties of Welded Steel as Applicable to Offshore Structures-Errata
 
API REPORT 80- 35
 Drill Pipe/Casing Protector Performance Testing
 
API REPORT 81- 15
 Probability-Based Fatigue Design Criteria for Offshore Structures
 
API REPORT 81- 22
 Utilization of a Reliability-Based API RP2A Format on a Platform Design
 
API REPORT 81- 29
 Review and Compilation of Pile Test Results Axial Pile Capacity
 
API REPORT 81- 33
 Effects of Fire Environment on Pressure Capability of Standard API and ANSI Connections Testing and Revised Analytical Procedure
 
API REPORT 81- 34
 Spectrum Fatigue Properties of Welded Steel as Applicable to Offshore Structures
 
API REPORT 81- 37
 Collapse Performance of Fabricated Cylinders Under Combined Axial Tension and External Pressure
 
API REPORT 81- 38
 Experimental Study on the Effect of Axial Loading on Collapse Resistance of Casing
 
API REPORT 81- 39
 Rheological Evaluation of Cement Slurries
 
API REPORT 81- 40
 Chord Stress Effects on the Ultimate Strength of Tubular Joints
 
API REPORT 81- 43
 Analysis of Trace Metals in Drilling Fluid Barite
 
API REPORT 82/83- 46
 Collapse Tests of Fabricated Cylinders Under Combined Axial Compression and External Pressure
 
API REPORT 82- 22
 Utilizing a Reliability-Based API RP2A Format
 
API REPORT 82- 31
 Hydrodynamic Coefficients for Cylinders Roughened by Marine Growths from the Gulf of Mexico
 
API REPORT 82- 34
 Variable Deflection Fatigue Properties of Welded Steel as Applicable to Offshore Structures
 
API REPORT 82- 36
 Development of Methods for the Evaluation of Perforators
 
API REPORT 82- 39
 Rheological Evaluation of Cement Slurries
 
API REPORT 82-41- 1
 Evaluation of P-Y Relationships in Sands
 
API REPORT 82-41- 2
 Evaluation of P-Y Relationships in Clays
 
API REPORT 82- 42
 Influence of Loading Rate on Axially Loaded Piles in Clay
 
API REPORT 82- 45
 Rheological Characterization of Fracturing Fluids
 
API REPORT 83- 22
 Implementation of a Reliability-Based API RP2A Format
 
API REPORT 83- 31
 Hydrodynamic Coefficients for Cylinders Covered with Soft Organisms, Particularly Sea Anemones
 
API REPORT 83- 33
 Prediction of Performance of 2"-6" ANSI Flanges and 2 1/16"-7 1/16" API Clamps and Flanges in Standard Fire Environment
 
API REPORT 83- 34
 Variable Deflection Fatigue Properties of Welded Steel as Applicable to Offshore Structures
 
API REPORT 83- 42
 Influence of Cyclic Loading on Axially Loaded Piles in Clay
 
API REPORT 83- 42B
 Analysis of Pile Response under Axial Loads
 
API REPORT 83- 45
 Rheological Characterization of Fracturing Fluids
 
API REPORT 83- 47
 Technical Summary Shake Table Correlation Project
 
API REPORT 83- 48
 Fatigue of Selected High Strength Steels in Sea Water
 
API REPORT 83- 49A
 Planning and Final Engineering for Drilling and Completion of Two CBL Standardization Wells
 
API REPORT 83- 50
 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol
 
API REPORT 84- 31
 Hydrodynamic Coefficients for Marine Roughened Cylinders-Addendum October 1986
 
API REPORT 84- 33
 Fire Testing of API Connections with Conditions of Offshore Platform Well Bay Fire
 
API REPORT 84- 39
 Rheological Evaluation of Cement Slurries - Correlation of Concentric Cylinder and Tube Viscometers
 
API REPORT 84- 45
 Rheological Characterization of Fracturing Fluids
 
API REPORT 84- 51
 Investigation of Pipe Thread Compounds
 
API REPORT 84- 52
 An Evaluation of the Behavior and Analysis of Laterally Loaded Pile Groups
 
API REPORT 84- 53
 Investigation of Leak Resistance of API 8-Round Connector
 
API REPORT 84- 54
 Bending Capacity of Fabricated Pipe at Fixed Ends
 
API REPORT 85- 16
 Stress Analysis of API Type 16B and 16BX Hubs
 
API REPORT 85- 22
 Seismic Load Effects Study-Addendum
 
API REPORT 85- 22
 Development of Preliminary Load and Resistance Design Document for Fixed Offshore Platforms
 
API REPORT 85- 24
 Weld Profile and Plate Thickness Effects in Fatigue as Applicable to Offshore Structures
 
API REPORT 85- 31
 Hydrodynamic Coefficients for Marine-Roughened Cylinders
 
API REPORT 85- 39
 Laminar and Turbulent Flow of Cement Slurries in Large Diameter Pipe
 
API REPORT 85- 45
 Rheological Characterization of Fracturing Fluids
 
API REPORT 85- 48
 Fatigue of Selected High Strength Steels in Sea Water
 
API REPORT 85- 53
 Investigation of Leak Resistance of API 8-Round Connector
 
API REPORT 85- 54
 Bending Capacity of Fabricated Pipe at End Connections
 
API REPORT 85- 55
 Earthquake Analysis for LRFD Calibration
 
API REPORT 85- 56
 Collapse Tests of Short Tubular Columns Subjected to Combined Loads
 
API REPORT 86/87- 56
 Effects of External Hydrostatic Pressure on Tubular Beam- Columns
 
API REPORT 86- 17
 Subsurface Safety Valve Research Study - Year 1
 
API REPORT 86-18 VOL 1
 Weld Profile and Thickness Effects on Fatigue of Tubular Welded Joints
 
API REPORT 86-18 VOL 2
 Weld Profile and Thickness Effects on Fatigue of Tubular Welded Joints
 
API REPORT 86- 21
 Capabilities of API Flanges under Combination of Loading
 
API REPORT 86- 22
 Load and Resistance Factor Design - Recommended Practice for Approval
 
API REPORT 86- 29A
 Comparison of Measured Axial Load Capacities of Steel Pipe Piles in Sand with Capacities Calculated Using the API Recommended Practice (RP2A)
 
API REPORT 86- 29B
 Offshore Axial Pile Design Reliability
 
API REPORT 86- 36
 Effects of Stress and Pore Pressure on Penetration of Jet Perforators in Berea Sandstone
 
API REPORT 86- 45
 Rheological Characterization of Fracturing Fluids
 
API REPORT 86- 51
 Investigation of Pipe Thread Compounds
 
API REPORT 86- 53
 Investigation of Leak Resistance of API Buttress Connector
 
API REPORT 86- 54
 Bending Capacity of Fabricated Pipe at End Connections
 
API REPORT 86- 55
 Tubular Member Strength Equations for LRFD
 
API REPORT 87- 17
 API 14A Subsurface Safety Valve Research Study - Year 2
 
API REPORT 87- 20
 Environmental Event Combination Criteria Phase I, Risk Analysis
 
API REPORT 87- 22
 Load and Resistance Factor Design - Recalibration
 
API REPORT 87- 24
 Weld Profile and Plate Thickness Effects in Fatigue as Applicable to Offshore Structures
 
API REPORT 87- 29
 Offshore Lateral Pile Design Reliability
 
API REPORT 87- 36
 Further Effects of Stress on Penetration and Flow Performance of Jet Perforators
 
API REPORT 87- 45
 Rheology of Fracturing Fluid Gels
 
API REPORT 87- 48
 Fatigue of Selected High Strength Steels in Sea Water-Final Report
 
API REPORT 87- 53
 Investigation of Leak Resistance of API Casing Connections
 
API REPORT 87- 56
 Hydrostatic Beam Column Test (Phase II)
 
API REPORT 88- 17
 API 14A Subsurface Safety Valve Research Study - Year 3
 
API REPORT 88- 20
 Environmental Event Combination Criteria Phase II: Design Calibration and Directionality Effect
 
API REPORT 88- 21
 Capabilities of API Integral Flanges under Combination of Loading
 
API REPORT 88- 22
 Load and Resistance Factor Design for Fixed Offshore Platforms
 
API REPORT 88- 24
 Weld Profile and Plate Thickness Effects in Fatigue as Applicable to Offshore Structures-API 87-24
 
API REPORT 88- 25
 The Effect of Toughness on Tubular Good Service Performance
 
API REPORT 88- 30
 Specification Parameters Determination Drilling Fluids Materials
 
API REPORT 88- 36
 Minimum Size and Stress Requirements for a Possible API Standard Test Target for Performance Evaluation of Shaped Charge Oil Well Perforators in Stressed Rock
 
API REPORT 88- 51
 Investigation of Pipe Thread Compounds-PN4875
 
API REPORT 89- 17
 API 14A Subsurface Safety Valve Research Study-Year 4
 
API REPORT 89- 21
 Capabilities of Overbored API Threaded Flanges under Combination of Loading
 
API REPORT 89- 21
 Temperature Derating of API Flanges under Combination of Loading
 
API REPORT 89- 22
 Load and Resistance Factor Design - Updating and Expanded Applications
 
API REPORT 89- 24
 Weld Profile and Plate Thickness Effects in Fatigue as Applicable to Offshore Structures
 
API REPORT 89- 25
 Phase II - The Effect of Toughness on Tubular Good Service Performances
 
API REPORT 89- 29
 Offshore Pile System Reliability
 
API REPORT 89- 30
 Specification Parameters Determination Drilling Fluids Materials
 
API REPORT 89- 36
 Application of Prototype Penetration and Flow Tests in Stressed Targets to Several Perforator Charges and Rocks
 
API REPORT 9
 A Model Study of Axially Loaded Pile Segments Including Pore Pressure Measurements
 
API REPORT 90- 21
 Sealability of API R, RX, & BX Ring Gaskets
 
API REPORT 90- 30
 Specification Parameters Determination Drilling Fluids Materials
 
API REPORT 90- 36
 Investigation of Core Orientation and Perforation Debris on Standard Perforation Flow Tests
 
API REPORT 90- 42
 Axial Capacity of Piles in Sand
 
API REPORT 90- 48
 Growth Rate of Small Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures
 
API REPORT 90- 48
 Growth Rate of Short Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures
 
API REPORT 90- 56
 Analysis Cylindrical Shell Database and Validation of Design Formulations
 
API REPORT 90- 60
 Cyclic Pressure Fatique Evaluation of High Pressure Fiberglass Pipe
 
API REPORT 90- 61
 Recommended Practice for Underwater Magnetic Particle In-Service Weld Inspection of Offshore Fixed Platforms and Guidelines for Qualification of Magnetic Particle Inspector Divers
 
API REPORT 90- 62
 Experimental Study of the Erosional/Corrosional Velocity Citerion for Sizing Multiphase Flow Lines Phase 1 - Experimental Facility Construction Report
 
API REPORT 90- 63
 Capabilities of Swivel Flanges under Combinations of Loading
 
API REPORT 90- 64
 API Elastomer Test Program - Task B
 
API REPORT 90- 66
 Wind-Induced Fatigue
 
API REPORT 91- 20A
 Environmental Event Combination Criteria for Tension Leg Platforms Phase I: Risk Analysis
 
API REPORT 91- 51
 Investigation of Pipe Thread Compounds
 
API REPORT 91- 62
 Experimental Study of the Erosional/Corrosional Velocity Criterion for Sizing Multiphase Flow Lines Phase II-Experimental Results
 
API REPORT 91- 67
 Seismic Safety Requalification of Offshore Platforms
 
API REPORT 91- 70
 Development of Make-up Procedures for Fibreglass Tubing
 
API REPORT 91- 71
 Proposal for New Nuclear Well Logging Calibration Facility
 
API REPORT 92- 30
 Specification Parameters for Drilling Fluid Products
 
API REPORT 92- 48
 Growth Rate of Short Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures
 
API REPORT 92- 56
 Analysis of Cylindrical Shell Database and Validation of Design Formulations (Phase 2: for D/t Values > 300)
 
API REPORT 92- 66
 Vortex-Induced Vibrations of Structural Members in Unsteady Winds
 
API REPORT 92- 68
 Large Scale Natural Gas/Kerosine Mixed Fuel Jet Fires
 
API REPORT 92- 70
 Development of Procedures to Define a Reliability Based Specification for the Make-Up of FRP 8-Round Connections
 
API REPORT 92- 72
 API RP 5C5 Class III Test Summary Connection Evaluation API Proposed TSA Tubing on 2-7/8" - 6.5 PPF L80 Pipe
 
API REPORT 92- 75
 Weld Profile Effects and Fatigue Life Improvement to American Petroleum Institute Offshore Tubular Joint Research Center
 
API REPORT 93- 77
 Influence of Cathodic Protection on the Fatigue Life of Welded Connections in Seawater
 
API REPORT 93- 85
 Report for API 11V2 Verification Tests: Part 1 - Review of Gas Lift Valve Testing Facility
 
API REPORT 94- 62
 Erosion/Corrosion Testing for Multiphase Flow Lines
 
API REPORT 94- 81
 Further Evaluation of Offshore Structures Performance in Hurricane Andrew - Development of Bias Factors for Pile Foundation Capacity
 
API REPORT 9- A
 AXCOL 3: A Program for Discrete-Element Solution of Axially Loaded Members with Linear or Nonlinear Supports
 
API REPORT 9C
 Axcol 3: a Program for Discrete-Element Solution of Axially Loaded Members with Linear or Nonlinear Supports
 
API REPORT PUBL 344
 Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles
 

Cheapest & Original

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

http://www.findstandards.info/Standards/NFPA%20Standards.htm

http://www.findstandards.info/Standards/IEEE%20Standards.htm